[PATCH 1/6] kernel-fitimage: fix intentation

[Adrian Freihofer <adrian.freihofer@gmail.com>]

From: Adrian Freihofer <adrian.freihofer@siemens.com>

white space changes only.
- python part should be 4 spaces, not 8.
- use tabs for shell

Signed-off-by: Adrian Freihofer <adrian.freihofer@siemens.com>
---
 meta/classes-recipe/kernel-fitimage.bbclass | 64 ++++++++++-----------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git a/meta/classes-recipe/kernel-fitimage.bbclass b/meta/classes-recipe/kernel-fitimage.bbclass
index 6e6898e5f6f..ce52297aec3 100644
--- a/meta/classes-recipe/kernel-fitimage.bbclass
+++ b/meta/classes-recipe/kernel-fitimage.bbclass
@@ -29,27 +29,27 @@ KERNEL_IMAGETYPE_REPLACEMENT ?= "${@get_fit_replacement_type(d)}"
 DEPENDS:append = " ${@'u-boot-tools-native dtc-native' if 'fitImage' in (d.getVar('KERNEL_IMAGETYPES') or '').split() else ''}"
 
 python __anonymous () {
-        # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal
-        # to kernel.bbclass . We have to override it, since we pack zImage
-        # (at least for now) into the fitImage .
-        typeformake = d.getVar("KERNEL_IMAGETYPE_FOR_MAKE") or ""
-        if 'fitImage' in typeformake.split():
-            d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', typeformake.replace('fitImage', d.getVar('KERNEL_IMAGETYPE_REPLACEMENT')))
-
-        image = d.getVar('INITRAMFS_IMAGE')
-        if image:
-            d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete')
-
-        ubootenv = d.getVar('UBOOT_ENV')
-        if ubootenv:
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' virtual/bootloader:do_populate_sysroot')
-
-        #check if there are any dtb providers
-        providerdtb = d.getVar("PREFERRED_PROVIDER_virtual/dtb")
-        if providerdtb:
-            d.appendVarFlag('do_assemble_fitimage', 'depends', ' virtual/dtb:do_populate_sysroot')
-            d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' virtual/dtb:do_populate_sysroot')
-            d.setVar('EXTERNAL_KERNEL_DEVICETREE', "${RECIPE_SYSROOT}/boot/devicetree")
+    # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal
+    # to kernel.bbclass . We have to override it, since we pack zImage
+    # (at least for now) into the fitImage .
+    typeformake = d.getVar("KERNEL_IMAGETYPE_FOR_MAKE") or ""
+    if 'fitImage' in typeformake.split():
+        d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', typeformake.replace('fitImage', d.getVar('KERNEL_IMAGETYPE_REPLACEMENT')))
+
+    image = d.getVar('INITRAMFS_IMAGE')
+    if image:
+        d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete')
+
+    ubootenv = d.getVar('UBOOT_ENV')
+    if ubootenv:
+        d.appendVarFlag('do_assemble_fitimage', 'depends', ' virtual/bootloader:do_populate_sysroot')
+
+    #check if there are any dtb providers
+    providerdtb = d.getVar("PREFERRED_PROVIDER_virtual/dtb")
+    if providerdtb:
+        d.appendVarFlag('do_assemble_fitimage', 'depends', ' virtual/dtb:do_populate_sysroot')
+        d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' virtual/dtb:do_populate_sysroot')
+        d.setVar('EXTERNAL_KERNEL_DEVICETREE', "${RECIPE_SYSROOT}/boot/devicetree")
 }
 
 
@@ -480,13 +480,13 @@ fitimage_emit_section_config() {
 		# default node is selected based on dtb ID if it is present,
 		# otherwise its selected based on kernel ID
 		if [ -n "$dtb_image" ]; then
-		        # Select default node as user specified dtb when
-		        # multiple dtb exists.
-		        if [ -n "$default_dtb_image" ]; then
-			        default_line="default = \"${FIT_CONF_PREFIX}$default_dtb_image\";"
-		        else
-			        default_line="default = \"${FIT_CONF_PREFIX}$dtb_image\";"
-		        fi
+			# Select default node as user specified dtb when
+			# multiple dtb exists.
+			if [ -n "$default_dtb_image" ]; then
+				default_line="default = \"${FIT_CONF_PREFIX}$default_dtb_image\";"
+			else
+				default_line="default = \"${FIT_CONF_PREFIX}$dtb_image\";"
+			fi
 		else
 			default_line="default = \"${FIT_CONF_PREFIX}$kernel_id\";"
 		fi
@@ -605,9 +605,9 @@ fitimage_assemble() {
 				DTB_PATH="${KERNEL_OUTPUT_DIR}/$DTB"
 			fi
 
-		        # Strip off the path component from the filename
+			# Strip off the path component from the filename
 			if "${@'false' if oe.types.boolean(d.getVar('KERNEL_DTBVENDORED')) else 'true'}"; then
-			    DTB=`basename $DTB`
+				DTB=`basename $DTB`
 			fi
 
 			# Set the default dtb image if it exists in the devicetree.
@@ -715,8 +715,8 @@ fitimage_assemble() {
 	# kernel-fitimage.bbclass currently only supports a single kernel (no less or
 	# more) to be added to the FIT image along with 0 or more device trees and
 	# 0 or 1 ramdisk.
-        # It is also possible to include an initramfs bundle (kernel and rootfs in one binary)
-        # When the initramfs bundle is used ramdisk is disabled.
+	# It is also possible to include an initramfs bundle (kernel and rootfs in one binary)
+	# When the initramfs bundle is used ramdisk is disabled.
 	# If a device tree is to be part of the FIT image, then select
 	# the default configuration to be used is based on the dtbcount. If there is
 	# no dtb present than select the default configuation to be based on
-- 
2.45.2