[PATCH v7 3/7] barebox: set default BAREBOX_CONFIG for qemu machines

["Enrico Jörns" <ejo@pengutronix.de>]

From: Enrico Jorns <ejo@pengutronix.de>

These are set in the barebox recipe rather in the corresponding machines
(where they would belong otherwise) to keep the impact of barebox to
oe-core minimal for now.

"multi_v7_defconfig" is used for qemuarm since this is the default
barebox armv7 config that just enables all supported platforms.

"multi_v8_defconfig" is used for qemuarm64 sine this is the default
barebox armv8 config that just enables all supported platforms.

"efi_defconfig" is used for qemux86-64 which is the primary platform
where barebox will not be the first stage bootloader but an EFI payload.

Since these changes make barebox a provider for virtual/bootloader,
explicitly default to u-boot in the corresponding MACHINE configs to not
unnecessarily surprise users.

Signed-off-by: Enrico Jorns <ejo@pengutronix.de>
---
 meta/conf/machine/qemuarm.conf    | 1 +
 meta/conf/machine/qemuarm64.conf  | 1 +
 meta/conf/machine/qemux86-64.conf | 1 +
 3 files changed, 3 insertions(+)

diff --git a/meta/conf/machine/qemuarm.conf b/meta/conf/machine/qemuarm.conf
index 943ce7c16a..af76a53b8e 100644
--- a/meta/conf/machine/qemuarm.conf
+++ b/meta/conf/machine/qemuarm.conf
@@ -7,6 +7,7 @@ require conf/machine/include/qemu.inc
 
 KERNEL_IMAGETYPE = "zImage"
 
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 UBOOT_MACHINE ?= "qemu_arm_defconfig"
 
 SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
diff --git a/meta/conf/machine/qemuarm64.conf b/meta/conf/machine/qemuarm64.conf
index a096d964db..d310445a34 100644
--- a/meta/conf/machine/qemuarm64.conf
+++ b/meta/conf/machine/qemuarm64.conf
@@ -7,6 +7,7 @@ require conf/machine/include/qemu.inc
 
 KERNEL_IMAGETYPE = "Image"
 
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 UBOOT_MACHINE ?= "qemu_arm64_defconfig"
 
 SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
diff --git a/meta/conf/machine/qemux86-64.conf b/meta/conf/machine/qemux86-64.conf
index 14873a3b4f..4a9c6d364b 100644
--- a/meta/conf/machine/qemux86-64.conf
+++ b/meta/conf/machine/qemux86-64.conf
@@ -13,6 +13,7 @@ DEFAULTTUNE ?= "core2-64"
 require conf/machine/include/x86/tune-x86-64-v3.inc
 require conf/machine/include/x86/qemuboot-x86.inc
 
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 UBOOT_MACHINE ?= "qemu-x86_64_defconfig"
 
 KERNEL_IMAGETYPE = "bzImage"
-- 
2.39.5