Openembedded Core Discussions
 help / color / mirror / Atom feed
From: Joshua Watt <jpewhacker@gmail.com>
To: openembedded-core@lists.openembedded.org
Cc: Joshua Watt <JPEWhacker@gmail.com>
Subject: [OE-core][PATCH v2 0/5] Implement SPDX for deploy tasks
Date: Thu, 18 Jun 2026 09:38:40 -0600	[thread overview]
Message-ID: <20260618165032.347436-1-JPEWhacker@gmail.com> (raw)
In-Reply-To: <20260609222331.1293007-1-JPEWhacker@gmail.com>

The SPDX use case for file system image has been well defined since SPDX
was first implemented, however there has always been a desire to also
express SPDX output for other non-image deliverables (primarily, those
that have a do_deploy task or similar). These types of tasks cannot
easily use the traditional method of having a separate SPDX task that
runs to create their SPDX output as this causes lots of problems with
the way dependencies are specified. Instead, it is desirable for these
tasks to directly produce SPDX output that can be consumed by other
tasks that depend on them.

This patch series adds support for this. Any sstate task that starts
with "do_deploy" can now be added to the SPDX_DEPLOY_TASKS list and it
will run a postfunc to generate SPDX output that describes what is being
deployed. For classical do_deploy tasks, this is setup to be easy by
automatically capturing all the deployed output files in the SPDX data,
but other tasks can be added as well.

Finally, the do_create_image_spdx task is removed and replaced with a
SPDX deploy postfunc using this new system. This means that any task
that depends on do_image_complete will automatically also get the SPDX
output for the image, simplifying the dependency handling.

V2: Fixed SPDX documents missing at SBoM creation time when the
documents were not a direct dependency of the SBoM, and were present in
a sstate object. Previously, these sstate objects were not restored
because they were "covered" by the later sstate tasks, but now they are
restored if they are depended on by a task that creates SPDX output.

Joshua Watt (5):
  spdx: Add ability for deploy tasks to create SPDX
  classes-global/sstate: Keep SPDX generating setscene dependencies
  Add SPDX deploy tasks to various recipes
  spdx: Replace do_create_image_spdx with deploy task
  grub-efi: Change to MACHINE_ARCH

 meta/classes-global/sstate.bbclass            |  38 ++-
 meta/classes-recipe/barebox.bbclass           |   1 +
 .../create-spdx-image-3.0.bbclass             |  32 +-
 meta/classes-recipe/deploy.bbclass            |   1 +
 meta/classes-recipe/devicetree.bbclass        |   1 +
 meta/classes-recipe/kernel-fit-image.bbclass  |   1 +
 meta/classes-recipe/kernel.bbclass            |   1 +
 meta/classes-recipe/nospdx.bbclass            |   2 +-
 meta/classes/create-spdx-3.0.bbclass          | 173 ++++++++++
 meta/classes/spdx-common.bbclass              |   2 +-
 meta/lib/oe/sbom30.py                         |  46 ++-
 meta/lib/oe/spdx30_tasks.py                   | 301 +++++++++++++++---
 meta/lib/oe/spdx_common.py                    |   2 +-
 meta/recipes-bsp/grub/grub-efi_2.14.bb        |   3 +
 meta/recipes-bsp/opensbi/opensbi_1.8.1.bb     |   1 +
 meta/recipes-bsp/u-boot/u-boot.inc            |   1 +
 .../systemd/systemd-boot_259.5.bb             |   2 +-
 17 files changed, 514 insertions(+), 94 deletions(-)

-- 
2.54.0



  parent reply	other threads:[~2026-06-18 16:50 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-09 22:15 [OE-core][PATCH 0/5] Implement SPDX for deploy tasks Joshua Watt
2026-06-09 22:15 ` [OE-core][PATCH 1/5] classes/baremetal-image: Remove "do_" prefix from image manifest Joshua Watt
2026-06-09 22:15 ` [OE-core][PATCH 2/5] spdx: Reformat Joshua Watt
2026-06-09 22:15 ` [OE-core][PATCH 3/5] spdx: Add ability for deploy tasks to create SPDX Joshua Watt
2026-06-09 22:15 ` [OE-core][PATCH 4/5] Add SPDX deploy tasks Joshua Watt
2026-06-09 22:31   ` Patchtest results for " patchtest
2026-06-10  6:17   ` Mikko Rapeli
2026-06-10  7:46   ` Richard Purdie
2026-06-09 22:15 ` [OE-core][PATCH 5/5] spdx: Replace do_create_image_spdx with deploy task Joshua Watt
2026-06-10 13:17 ` [OE-core][PATCH 0/5] Implement SPDX for deploy tasks Mathieu Dubois-Briand
2026-06-11 18:46   ` Joshua Watt
2026-06-18 15:38 ` Joshua Watt [this message]
2026-06-18 15:38   ` [OE-core][PATCH v2 1/5] spdx: Add ability for deploy tasks to create SPDX Joshua Watt
2026-06-18 15:38   ` [OE-core][PATCH v2 2/5] classes-global/sstate: Keep SPDX generating setscene dependencies Joshua Watt
2026-06-18 15:38   ` [OE-core][PATCH v2 3/5] Add SPDX deploy tasks to various recipes Joshua Watt
2026-06-18 17:07     ` Patchtest results for " patchtest
2026-06-18 15:38   ` [OE-core][PATCH v2 4/5] spdx: Replace do_create_image_spdx with deploy task Joshua Watt
2026-06-18 15:38   ` [OE-core][PATCH v2 5/5] grub-efi: Change to MACHINE_ARCH Joshua Watt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260618165032.347436-1-JPEWhacker@gmail.com \
    --to=jpewhacker@gmail.com \
    --cc=openembedded-core@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox