From: Benhur Tessele <benhur.tessele@est.tech>
To: openembedded-core@lists.openembedded.org
Cc: Randy MacLeod <Randy.MacLeod@windriver.com>,
Benhur Tessele <benhur.tessele@est.tech>
Subject: [PATCH 1/2] rust: package rust-analyzer as rust-tools-analyzer
Date: Thu, 1 Oct 2026 14:56:29 +0200 [thread overview]
Message-ID: <20261001125630.760962-2-benhur.tessele@est.tech> (raw)
In-Reply-To: <20261001125630.760962-1-benhur.tessele@est.tech>
rust-analyzer is built alongside the other Rust tools (clippy, rustfmt)
but was not installed or packaged. Add a rust-tools-analyzer package and
install it for both the target and nativesdk variants.
Two additional pieces are required for rust-analyzer to be usable:
- The proc-macro server, rust-analyzer-proc-macro-srv, which
rust-analyzer looks up under <sysroot>/libexec. Install it into
${libexecdir}; without it, analysis of any crate using a derive or
attribute macro fails with "cannot find proc-macro server in sysroot".
- The standard library sources, which rust-analyzer analyses from source
rather than from the compiled rlibs. Add an RDEPENDS on ${PN}-src-lib
so that core/std items such as println! and derive resolve instead of
being reported as unresolved macros.
Both binaries link against librustc_driver from the main package, so the
package also RDEPENDS on ${PN}.
Signed-off-by: Benhur Tessele <benhur.tessele@est.tech>
---
meta/recipes-devtools/rust/rust_1.98.1.bb | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/meta/recipes-devtools/rust/rust_1.98.1.bb b/meta/recipes-devtools/rust/rust_1.98.1.bb
index 1f4ce5ebdb..d446c60651 100644
--- a/meta/recipes-devtools/rust/rust_1.98.1.bb
+++ b/meta/recipes-devtools/rust/rust_1.98.1.bb
@@ -261,18 +261,21 @@ do_test_compile () {
ALLOW_EMPTY:${PN} = "1"
-PACKAGES =+ "${PN}-rustdoc ${PN}-tools-clippy ${PN}-tools-rustfmt ${PN}-src-lib"
+PACKAGES =+ "${PN}-rustdoc ${PN}-tools-clippy ${PN}-tools-rustfmt ${PN}-tools-analyzer ${PN}-src-lib"
FILES:${PN}-rustdoc = "${bindir}/rustdoc"
FILES:${PN}-tools-clippy = "${bindir}/cargo-clippy ${bindir}/clippy-driver"
FILES:${PN}-tools-rustfmt = "${bindir}/rustfmt"
+FILES:${PN}-tools-analyzer = "${bindir}/rust-analyzer ${libexecdir}/rust-analyzer-proc-macro-srv"
FILES:${PN}-src-lib = "${libdir}/rustlib/src/rust"
RDEPENDS:${PN}-rustdoc = "${PN}"
RDEPENDS:${PN}-tools-clippy = "${PN}"
RDEPENDS:${PN}-tools-rustfmt = "${PN}"
+RDEPENDS:${PN}-tools-analyzer = "${PN} ${PN}-src-lib"
SUMMARY:${PN}-tools-clippy = "A collection of lints to catch common mistakes and improve your Rust code"
SUMMARY:${PN}-tools-rustfmt = "A tool for formatting Rust code according to style guidelines"
+SUMMARY:${PN}-tools-analyzer = "A language server providing IDE features for Rust"
do_install () {
rust_do_install
@@ -294,14 +297,19 @@ rust_do_install:class-nativesdk() {
rust_runx install
rust_runx install clippy
rust_runx install rustfmt
+ rust_runx install rust-analyzer
unset PSEUDO_UNLOAD
install -d ${D}${bindir}
- for i in cargo-clippy clippy-driver rustfmt; do
+ for i in cargo-clippy clippy-driver rustfmt rust-analyzer; do
cp rust-build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
patchelf --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
done
+ install -d ${D}${libexecdir}
+ cp rust-build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/rust-analyzer-proc-macro-srv ${D}${libexecdir}
+ patchelf --set-rpath "\$ORIGIN/../lib" ${D}${libexecdir}/rust-analyzer-proc-macro-srv
+
chown root:root ${D}/ -R
rm ${D}${libdir}/rustlib/uninstall.sh
rm ${D}${libdir}/rustlib/install.log
@@ -329,12 +337,13 @@ rust_do_install:class-nativesdk() {
FILES:${PN} += "${base_prefix}/environment-setup.d"
-EXTRA_TOOLS ?= "cargo-clippy clippy-driver rustfmt"
+EXTRA_TOOLS ?= "cargo-clippy clippy-driver rustfmt rust-analyzer"
rust_do_install:class-target() {
export PSEUDO_UNLOAD=1
rust_runx install
rust_runx install clippy
rust_runx install rustfmt
+ rust_runx install rust-analyzer
unset PSEUDO_UNLOAD
install -d ${D}${bindir}
@@ -343,6 +352,10 @@ rust_do_install:class-target() {
patchelf --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
done
+ install -d ${D}${libexecdir}
+ cp rust-build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/rust-analyzer-proc-macro-srv ${D}${libexecdir}
+ patchelf --set-rpath "\$ORIGIN/../lib" ${D}${libexecdir}/rust-analyzer-proc-macro-srv
+
install -d ${D}${libdir}/rustlib/${RUST_HOST_SYS}
install -m 0644 ${WORKDIR}/rust-targets/${RUST_HOST_SYS}.json ${D}${libdir}/rustlib/${RUST_HOST_SYS}/target.json
install -d ${D}${libdir}/rustlib/src/rust
--
2.43.0
next prev parent reply other threads:[~2026-10-01 12:57 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-01 12:56 [PATCH 0/2] rust: add rust-analyzer support Benhur Tessele
2026-10-01 12:56 ` Benhur Tessele [this message]
2026-10-01 12:56 ` [PATCH 2/2] packagegroup-rust-cross-canadian: add rust-analyzer to the SDK Benhur Tessele
2026-10-01 14:08 ` [OE-core] [PATCH 0/2] rust: add rust-analyzer support Mathieu Dubois-Briand
2026-10-02 9:05 ` Paul Barker
2026-10-02 14:54 ` Benhur T
2026-10-01 14:13 ` Paul Barker
2026-10-01 15:47 ` Benhur T
2026-10-02 9:00 ` Paul Barker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261001125630.760962-2-benhur.tessele@est.tech \
--to=benhur.tessele@est.tech \
--cc=Randy.MacLeod@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox