[PATCH 2/4] oe.fitimage: add new config interface variables for multi-kernel image, to fitimage config file

["Vahid Gharaee" <vgharaee@gmail.com>]

From: Vahid Gharaee <vgharaee@gmail.com>

Signed-off-by: Vahid Gharaee <vgharaee@gmail.com>
---
 meta/conf/image-fitimage.conf | 55 +++++++++++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/meta/conf/image-fitimage.conf b/meta/conf/image-fitimage.conf
index a06d30e494..21d54ce18d 100644
--- a/meta/conf/image-fitimage.conf
+++ b/meta/conf/image-fitimage.conf
@@ -102,3 +102,58 @@ FIT_UBOOT_ENV ?= ""
 # arch, os) if the corresponding flag is not set, while others (load address
 # and entry point) will be omitted in the final FIT.
 FIT_LOADABLES ?= ""
+
+# Allow user to insert additional kernel images, e.g. a second kernel built by
+# another recipe or multiconfig, or a prebuilt kernel. The default kernel
+# (kernel-1) from virtual/kernel is always included. Each entry is used as the
+# image node name and must not collide with other image nodes, e.g. kernel-1.
+# Entries can be configured through variable flags:
+#   FIT_KERNEL_FILENAME[id]    - kernel file, relative to FIT_KERNEL_DEPLOYDIR
+#                                (default: linux.bin, mandatory for prebuilt
+#                                kernels)
+#   FIT_KERNEL_DEPLOYDIR[id]   - directory containing the kernel file
+#                                (default: ${DEPLOY_DIR_IMAGE})
+#   FIT_KERNEL_RECIPE[id]      - recipe whose do_deploy provides the kernel
+#                                (default: none, the file must already exist).
+#                                Without FIT_KERNEL_MULTICONFIG the kernel file
+#                                must be deployed by this recipe.
+#   FIT_KERNEL_MULTICONFIG[id] - multiconfig building FIT_KERNEL_RECIPE[id]
+#                                (default recipe: virtual/kernel), requires
+#                                FIT_KERNEL_DEPLOYDIR[id]
+#   FIT_KERNEL_COMPRESSION[id] - default: for linux.bin deployed by
+#                                FIT_KERNEL_RECIPE or FIT_KERNEL_MULTICONFIG the
+#                                content of linux_comp next to it, else none
+#   FIT_KERNEL_LOADADDRESS[id] - default: ${UBOOT_LOADADDRESS}
+#   FIT_KERNEL_ENTRYPOINT[id]  - default: ${UBOOT_ENTRYPOINT}
+#   FIT_KERNEL_TYPE[id]        - default: ${UBOOT_MKIMAGE_KERNEL_TYPE}
+#   FIT_KERNEL_DESCRIPTION[id] - default: "Linux kernel"
+# Example, a kernel from the "rt" multiconfig with the same MACHINE:
+#   FIT_KERNELS = "kernel-rt"
+#   FIT_KERNEL_MULTICONFIG[kernel-rt] = "rt"
+#   FIT_KERNEL_DEPLOYDIR[kernel-rt] = "${TOPDIR}/tmp-rt/deploy/images/${MACHINE}"
+# Example, a second kernel recipe with KERNEL_PACKAGE_NAME = "kernel-rt":
+#   FIT_KERNELS = "kernel-rt"
+#   FIT_KERNEL_RECIPE[kernel-rt] = "linux-yocto-rt"
+#   FIT_KERNEL_DEPLOYDIR[kernel-rt] = "${DEPLOY_DIR_IMAGE}/kernel-rt"
+# Additional kernels are only referenced by configurations from FIT_CONFIGS.
+FIT_KERNELS ?= ""
+
+# Allow user to add configurations in addition to the ones generated per DTB
+# (or conf-1 without DTBs). Each entry results in a ${FIT_CONF_PREFIX}<id>
+# configuration node which can be configured through variable flags:
+#   FIT_CONFIG_KERNEL[id] - kernel image node, e.g. one of FIT_KERNELS
+#                           (default: kernel-1)
+#   FIT_CONFIG_DTB[id]    - DTB name as in KERNEL_DEVICETREE or a file name in
+#                           EXTERNAL_KERNEL_DEVICETREE (default: none)
+# The ramdisk, u-boot script, setup and loadables are referenced by all
+# configurations.
+# Example:
+#   FIT_CONFIGS = "rt"
+#   FIT_CONFIG_KERNEL[rt] = "kernel-rt"
+#   FIT_CONFIG_DTB[rt] = "am335x-boneblack.dtb"
+FIT_CONFIGS ?= ""
+
+# Allow user to select the default configuration by name without
+# FIT_CONF_PREFIX, e.g. "rt" for "conf-rt". Takes precedence over
+# FIT_CONF_DEFAULT_DTB.
+FIT_CONF_DEFAULT ?= ""
-- 
2.55.0