From: Gary Thomas <gary@mlbassoc.com>
To: Darren Hart <dvhart@linux.intel.com>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>,
poky@yoctoproject.org, openembedded-core@lists.openembedded.org
Subject: Re: [poky] [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard
Date: Fri, 15 Apr 2011 16:43:36 -0600 [thread overview]
Message-ID: <4DA8CA18.3000801@mlbassoc.com> (raw)
In-Reply-To: <4DA8C8C0.4060403@linux.intel.com>
On 04/15/2011 04:37 PM, Darren Hart wrote:
>
>
> On 04/15/2011 10:00 AM, Paul Eggleton wrote:
>> From: Paul Eggleton<paul.eggleton@linux.intel.com>
>>
>> Avoids manual configuration of the BeagleBoard xM's ethernet port (which
>> shows up as usb0).
>>
>> Fixes [YOCTO #930]
>>
>> Signed-off-by: Paul Eggleton<paul.eggleton@linux.intel.com>
>> ---
>> .../netbase/netbase-4.45/beagleboard/interfaces | 27 ++++++++++++++++++++
>> 1 files changed, 27 insertions(+), 0 deletions(-)
>> create mode 100644 meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>>
>> diff --git a/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> new file mode 100644
>> index 0000000..b6935c1
>> --- /dev/null
>> +++ b/meta/recipes-core/netbase/netbase-4.45/beagleboard/interfaces
>> @@ -0,0 +1,27 @@
>> +# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
>> +
>> +# The loopback interface
>> +auto lo
>> +iface lo inet loopback
>> +
>> +# Wireless interfaces
>> +iface wlan0 inet dhcp
>> + wireless_mode managed
>> + wireless_essid any
>> + wpa-driver wext
>> + wpa-conf /etc/wpa_supplicant.conf
>> +
>> +iface atml0 inet dhcp
>> +
>> +# Wired or wireless interfaces
>> +auto eth0
>> +iface eth0 inet dhcp
>> +iface eth1 inet dhcp
>
> Since we're adding a this specifically for the beagleboard, I don't see
> the value of adding eth0 or eth1. I'm not sure about wifi and bluetooth,
> I believe there are modules out there.
eth1 yes, but doesn't the BeagleBoard xM have eth0?
>
> I suppose it doesn't hurt to have them there as examples.
>
>> +
>> +# Ethernet/RNDIS gadget (g_ether) or LAN9514 on BeagleBoard xM
>> +auto usb0
>> +iface usb0 inet dhcp
>> +
>> +# Bluetooth networking
>> +iface bnep0 inet dhcp
>> +
>
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
next prev parent reply other threads:[~2011-04-15 22:45 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-04-15 17:00 [PATCH 0/3] /etc/network/interfaces updates Paul Eggleton
2011-04-15 17:00 ` [PATCH 1/3] netbase: automatically bring up eth0 Paul Eggleton
2011-04-15 17:00 ` [PATCH 2/3] netbase: automatically bring up usb0 on beagleboard Paul Eggleton
2011-04-15 18:26 ` [poky] " Saul Wold
2011-04-16 4:31 ` Koen Kooi
2011-04-18 7:05 ` Richard Purdie
2011-04-18 9:17 ` Paul Eggleton
2011-04-18 9:30 ` Koen Kooi
2011-04-18 9:53 ` Richard Purdie
2011-04-18 10:48 ` Koen Kooi
2011-04-18 11:04 ` Richard Purdie
2011-04-18 11:17 ` Koen Kooi
2011-04-15 22:37 ` Darren Hart
2011-04-15 22:43 ` Gary Thomas [this message]
2011-04-15 23:01 ` Darren Hart
2011-04-18 9:12 ` Paul Eggleton
2011-04-18 16:07 ` Darren Hart
2011-04-15 17:00 ` [PATCH 3/3] netbase: add /etc/network/interfaces file for qemumips & qemuppc Paul Eggleton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4DA8CA18.3000801@mlbassoc.com \
--to=gary@mlbassoc.com \
--cc=dvhart@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=paul.eggleton@linux.intel.com \
--cc=poky@yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox