Re: Unrecognized option while building pseudo (target)

[Mark Hatle <mark.hatle@windriver.com>]

pseudo currently only works on IA32 hosts.  It was never really intended to work
on the target system, but should.

If you think you want pseudo on the target.. you'll have to verify that all of
the calls are being trapped properly on ARM, as well as modify the build
instructions to not worry about IA32 specific items.

(Right now, if you change the compilation to not specify the -m32 on arm, I'd
give pseudo about a 75% chance of working properly on ARM.. but it's never been
tested there.)

--Mark

On 8/8/11 6:36 AM, Anders Darander wrote:
> 
> Hi,
> 
> After updating my work-in-progress to upgrade our internal distro from
> oe-dev to oe-core, I got a new problem... (At least new to me, as far as
> I remember I didn't have that problem before the vacation. Otoh, my old
> build-box is temporarily out of service HW-problems, so this is a new
> build environment).
> 
> The problem is that my cross-compiler, arm-oe-linux-gnueabi-gcc, do not
> recognize the -m32 option, that the pseudo makefile tries to supply.
> 
> Short excerpt of the build log, just to show the call to gcc and its
> error message:
> | arm-oe-linux-gnueabi-gcc  -march=armv5te  -mno-thumb -mthumb-interwork
> -mtune=arm926ej-s
> --sysroot=/home/anders/oe-build-core/build-ccu/tmp-eglibc/sysroots/ccu
> -O2 -pipe -g -feliminate-unused-debug-types -pipe -std=gnu99 -Wall -W
> -Wextra -fPIC -D_LARGEFILE64_SOURCE -D_ATFILE_SOURCE -m32
> -DPSEUDO_PREFIX='"/usr"' -DPSEUDO_SUFFIX='""' -DPSEUDO_BINDIR='"bin"'
> -DPSEUDO_LIBDIR='"lib/pseudo/lib"' -DPSEUDO_LOCALSTATEDIR='"var/pseudo"'
> -DPSEUDO_VERSION='"1.1.1"' -O2 -g
> -L/home/anders/oe-build-core/build-ccu/tmp-eglibc/sysroots/ccu/usr/lib
> -I/home/anders/oe-build-core/build-ccu/tmp-eglibc/sysroots/ccu/usr/include
> -Wl,-R/home/anders/oe-build-core/build-ccu/tmp-eglibc/sysroots/ccu/usr/lib
> -c -o pseudo_tables.o pseudo_tables.c
> | cc1: error: unrecognized command line option '-m32'cc1: error:
> unrecognized command line option '-m32'cc1: error: unrecognized command
> line option '-m32'cc1: error: unrecognized command line option '-m32'
> 
> By commenting out the setting of 'CFLAGS_CODE += -m$(BITS)' in
> Makefile.in, I can get the build to continue past pseudo.
> 
> Any ideas of how I should correctly fix this? Or if I have some other
> problem in my environment that could cause such a failure....
> 
> Cheers,
> Anders 
>