On 27/02/12 13:45, Jack Mitchell wrote:
> I am having issues compiling the systemd-image for beaglebone under 
> Angstrom. I receive the following error message which seems to state 
> that 'install' is missing, is anyone else having trouble or could 
> provide some insight to this?
>
>     ERROR: Function failed: do_install (see
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/temp/log.do_install.16223
>     for further information)
>     + cd
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/git
>     + do_install
>     + oe_runmake -e install
>     DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
>     + '[' xmake = x ']'
>     + bbnote make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
>     'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc'
>     STRIPCMD=echo -e install
>     DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
>     + echo 'NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
>     LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo
>     -e install
>     DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image'
>     NOTE: make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
>     LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc STRIPCMD=echo
>     -e install
>     DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
>     + make -j12 V=1 CROSS=arm-angstrom-linux-gnueabi-
>     'LIBTOOL=arm-angstrom-linux-gnueabi-libtool --tag cc'
>     STRIPCMD=echo -e install
>     DESTDIR=/home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image
>     /usr/bin/install -c -d
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/lib
>     /usr/bin/install -c -d
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/bin
>     /usr/bin/install -c -m 644 -D man/cpufreq-set.1
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/share/man/man1/cpufreq-set.1
>     /usr/bin/install -c -d
>     /home/jack/angstrom/build/tmp-angstrom_2010_x-eglibc/work/armv7a-angstrom-linux-gnueabi/cpufrequtils-008-r3/image/usr/share/locale
>     make: /usr/bin/install: Command not found
>     make: *** [install-lib] Error 127
>     make: *** Waiting for unfinished jobs....
>     make: /usr/bin/install: Command not found
>     make: *** [install-gmo] Error 127
>     make: /usr/bin/install: Command not found
>     make: *** [install-tools] Error 127
>     Translating de make: /usr/bin/install: Command not found
>     make: *** [install-man] Error 127
>     ...... done.
>     54 translated messages.
>     Translating fr ...... done.
>     45 translated messages, 7 fuzzy translations, 2 untranslated messages.
>     Translating it ...... done.
>     54 translated messages.
>     Translating cs ...... done.
>     45 translated messages, 7 fuzzy translations, 2 untranslated messages.
>     Translating pt ...... done.
>     54 translated messages.
>     Translating ca ...... done.
>     54 translated messages.
>     + die 'oe_runmake failed'
>     + bbfatal 'oe_runmake failed'
>     + echo 'ERROR: oe_runmake failed'
>     ERROR: oe_runmake failed
>     + exit 1
>
>
> Regards,
> Jack.
>
>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core

Ok, I fixed this finally! In archlinux `install` is not located in 
/usr/bin/install but in /bin/install so a quick symlink and that was 
fixed. However, should bitbake be going into my system to use install 
like this, and should it be hard-coded in cpufrequtils?

Jack.

-- 

   Jack Mitchell (jack@embed.me.uk)
   Embedded Systems Engineer
   http://www.embed.me.uk

--