From: Saul Wold <sgw@linux.intel.com>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Cc: Paul Eggleton <paul.eggleton@linux.intel.com>
Subject: Re: [PATCH 1/1] opkg: fix installation of dev / dbg packages
Date: Tue, 10 Jul 2012 11:02:23 -0700 [thread overview]
Message-ID: <4FFC6E2F.6030806@linux.intel.com> (raw)
In-Reply-To: <bf72d68147740f83d08227f37d334ac924542e3c.1341937252.git.paul.eggleton@linux.intel.com>
On 07/10/2012 09:22 AM, Paul Eggleton wrote:
> OE-Core revision ffe93e2a099e4cadb1829dc12a58a6d7bef9a5a7 moved opkg's
> configuration file into /etc/opkg, and opkg always reads all files under
> this directory even if -f is specified (as it is during do_rootfs in
> order to specify our own generated config file), and this means that
> after opkg-collateral is installed into the rootfs, this version of the
> config is used, resulting in opkg ignoring the list of packages it has
> already downloaded (since it now sees list_dir as /var/lib/opkg instead
> of the default /var/lib/opkg/lists) and thus it fails to install any of
> the "attemptonly" packages (including *-dev, *-dbg, etc.).
>
> If we change the -f option to ignore configuration files in /etc/opkg
> then we no longer have this problem.
>
> Fixes [YOCTO #2595].
>
> Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
> ---
> .../recipes-devtools/opkg/opkg/conf_override.patch | 91 ++++++++++++++++++++
> meta/recipes-devtools/opkg/opkg_svn.bb | 3 +-
> 2 files changed, 93 insertions(+), 1 deletion(-)
> create mode 100644 meta/recipes-devtools/opkg/opkg/conf_override.patch
>
Merged into OE-Core
Thanks
Sau!
> diff --git a/meta/recipes-devtools/opkg/opkg/conf_override.patch b/meta/recipes-devtools/opkg/opkg/conf_override.patch
> new file mode 100644
> index 0000000..b1698d8
> --- /dev/null
> +++ b/meta/recipes-devtools/opkg/opkg/conf_override.patch
> @@ -0,0 +1,91 @@
> +From 45d0468f7f9e9be633b2819aa43ab9b6287b8e6a Mon Sep 17 00:00:00 2001
> +From: Paul Eggleton <paul.eggleton@linux.intel.com>
> +Date: Mon, 9 Jul 2012 11:01:15 +0100
> +Subject: [PATCH] Do not read /etc/opkg/*.conf if -f is specified
> +
> +If a configuration file is specified on the command line, we should
> +assume it contains all of the configuration and not try to read the
> +configuration in /etc/opkg.
> +
> +Upstream-Status: Pending
> +
> +Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
> +---
> + libopkg/opkg_conf.c | 55 ++++++++++++++++++++++++++-------------------------
> + 1 file changed, 28 insertions(+), 27 deletions(-)
> +
> +diff --git a/libopkg/opkg_conf.c b/libopkg/opkg_conf.c
> +index 4711ce7..1e65bad 100644
> +--- a/libopkg/opkg_conf.c
> ++++ b/libopkg/opkg_conf.c
> +@@ -473,39 +473,40 @@ opkg_conf_load(void)
> + &conf->pkg_src_list, &conf->dist_src_list))
> + goto err1;
> + }
> +-
> +- if (conf->offline_root)
> +- sprintf_alloc(&etc_opkg_conf_pattern, "%s/etc/opkg/*.conf", conf->offline_root);
> + else {
> +- const char *conf_file_dir = getenv("OPKG_CONF_DIR");
> +- if (conf_file_dir == NULL)
> +- conf_file_dir = OPKG_CONF_DEFAULT_CONF_FILE_DIR;
> +- sprintf_alloc(&etc_opkg_conf_pattern, "%s/*.conf", conf_file_dir);
> +- }
> +-
> +- memset(&globbuf, 0, sizeof(globbuf));
> +- glob_ret = glob(etc_opkg_conf_pattern, 0, glob_errfunc, &globbuf);
> +- if (glob_ret && glob_ret != GLOB_NOMATCH) {
> +- free(etc_opkg_conf_pattern);
> +- globfree(&globbuf);
> +- goto err1;
> +- }
> +-
> +- free(etc_opkg_conf_pattern);
> ++ if (conf->offline_root)
> ++ sprintf_alloc(&etc_opkg_conf_pattern, "%s/etc/opkg/*.conf", conf->offline_root);
> ++ else {
> ++ const char *conf_file_dir = getenv("OPKG_CONF_DIR");
> ++ if (conf_file_dir == NULL)
> ++ conf_file_dir = OPKG_CONF_DEFAULT_CONF_FILE_DIR;
> ++ sprintf_alloc(&etc_opkg_conf_pattern, "%s/*.conf", conf_file_dir);
> ++ }
> +
> +- for (i = 0; i < globbuf.gl_pathc; i++) {
> +- if (globbuf.gl_pathv[i])
> +- if (conf->conf_file &&
> +- !strcmp(conf->conf_file, globbuf.gl_pathv[i]))
> +- continue;
> +- if ( opkg_conf_parse_file(globbuf.gl_pathv[i],
> +- &conf->pkg_src_list, &conf->dist_src_list)<0) {
> ++ memset(&globbuf, 0, sizeof(globbuf));
> ++ glob_ret = glob(etc_opkg_conf_pattern, 0, glob_errfunc, &globbuf);
> ++ if (glob_ret && glob_ret != GLOB_NOMATCH) {
> ++ free(etc_opkg_conf_pattern);
> + globfree(&globbuf);
> + goto err1;
> + }
> +- }
> +
> +- globfree(&globbuf);
> ++ free(etc_opkg_conf_pattern);
> ++
> ++ for (i = 0; i < globbuf.gl_pathc; i++) {
> ++ if (globbuf.gl_pathv[i])
> ++ if (conf->conf_file &&
> ++ !strcmp(conf->conf_file, globbuf.gl_pathv[i]))
> ++ continue;
> ++ if ( opkg_conf_parse_file(globbuf.gl_pathv[i],
> ++ &conf->pkg_src_list, &conf->dist_src_list)<0) {
> ++ globfree(&globbuf);
> ++ goto err1;
> ++ }
> ++ }
> ++
> ++ globfree(&globbuf);
> ++ }
> +
> + if (conf->offline_root)
> + sprintf_alloc (&lock_file, "%s/%s", conf->offline_root, OPKGLOCKFILE);
> +--
> +1.7.9.5
> +
> diff --git a/meta/recipes-devtools/opkg/opkg_svn.bb b/meta/recipes-devtools/opkg/opkg_svn.bb
> index c07d393..faf0ba3 100644
> --- a/meta/recipes-devtools/opkg/opkg_svn.bb
> +++ b/meta/recipes-devtools/opkg/opkg_svn.bb
> @@ -6,6 +6,7 @@ SRC_URI = "svn://opkg.googlecode.com/svn;module=trunk;proto=http \
> file://fix_installorder.patch \
> file://offline_postinstall.patch\
> file://track_parents.patch \
> + file://conf_override.patch \
> "
>
> S = "${WORKDIR}/trunk"
> @@ -13,4 +14,4 @@ S = "${WORKDIR}/trunk"
> SRCREV = "633"
> PV = "0.1.8+svnr${SRCPV}"
>
> -PR = "${INC_PR}.0"
> +PR = "${INC_PR}.1"
>
prev parent reply other threads:[~2012-07-10 18:13 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-10 16:22 [PATCH 0/1] Fix dev/dbg installation for ipk backend Paul Eggleton
2012-07-10 16:22 ` [PATCH 1/1] opkg: fix installation of dev / dbg packages Paul Eggleton
2012-07-10 18:02 ` Saul Wold [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFC6E2F.6030806@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=paul.eggleton@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox