From: Saul Wold <sgw@linux.intel.com>
To: Patches and discussions about the oe-core layer
<openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH] slang 2.2.4: fix the pcre existence checking
Date: Thu, 26 Jul 2012 13:08:22 -0700 [thread overview]
Message-ID: <5011A3B6.80606@linux.intel.com> (raw)
In-Reply-To: <1343203669-23792-1-git-send-email-rongqing.li@windriver.com>
On 07/25/2012 01:07 AM, rongqing.li@windriver.com wrote:
> From: Roy.Li <rongqing.li@windriver.com>
>
> [YOCTO #2820]
>
> when check if there is pcre, the configure file always check
> the host dir. now we make it work by adding correct prefix for
> cross-compile environment.
>
> Signed-off-by: Roy.Li <rongqing.li@windriver.com>
> ---
> .../slang/slang/fix-check-pcre.patch | 108 ++++++++++++++++++++
> meta/recipes-extended/slang/slang_2.2.4.bb | 3 +-
> 2 files changed, 110 insertions(+), 1 deletions(-)
> create mode 100644 meta/recipes-extended/slang/slang/fix-check-pcre.patch
>
> diff --git a/meta/recipes-extended/slang/slang/fix-check-pcre.patch b/meta/recipes-extended/slang/slang/fix-check-pcre.patch
> new file mode 100644
> index 0000000..0c1553a
> --- /dev/null
> +++ b/meta/recipes-extended/slang/slang/fix-check-pcre.patch
> @@ -0,0 +1,108 @@
> +fix the pcre existence checking
> +
> +when check if there is pcre, the configure file always check
> +the host dir. now we make it work by adding correct prefix for
> +cross-compile environment.
> +
> +When enable pcre-module, we see a QA warning because rpaths
> +hardcoded into the build, rpaths are not needed, so lets turn
> +this off.
> +
> +Upstream-Status: Inappropriate
> +Signed-off-by: Roy.Li <rongqing.li@windriver.com>
> +---
> + configure | 60 ++++++------------------------------------------------------
> + 1 files changed, 6 insertions(+), 54 deletions(-)
> +
> +diff --git a/configure b/configure
> +index f1586c3..d22814f 100755
> +--- a/configure
> ++++ b/configure
> +@@ -6991,6 +6991,7 @@ $as_echo_n "checking for the pcre library and header files ... " >&6; }
> + /usr/include/pcre,/usr/lib \
> + /usr/pcre/include,/usr/pcre/lib \
> + /usr/include,/usr/lib \
> ++ /usr/include,/usr/lib64 \
> + /opt/include/pcre,/opt/lib \
> + /opt/pcre/include,/opt/pcre/lib \
> + /opt/include,/opt/lib"
> +@@ -7021,14 +7022,14 @@ $as_echo_n "checking for the pcre library and header files ... " >&6; }
> + xincdir=`echo $include_and_lib | tr ',' ' ' | awk '{print $1}'`
> + xlibdir=`echo $include_and_lib | tr ',' ' ' | awk '{print $2}'`
> + found=0
> +- if test -r $xincdir/$xincfile
> ++ if test -r $PKG_CONFIG_SYSROOT_DIR/$xincdir/$xincfile
> + then
> + for E in $exts
> + do
> +- if test -r "$xlibdir/$xlibfile.$E"
> ++ if test -r "$PKG_CONFIG_SYSROOT_DIR/$xlibdir/$xlibfile.$E"
> + then
> +- jd_pcre_include_dir="$xincdir"
> +- jd_pcre_library_dir="$xlibdir"
> ++ jd_pcre_include_dir="$PKG_CONFIG_SYSROOT_DIR/$xincdir"
> ++ jd_pcre_library_dir="$PKG_CONFIG_SYSROOT_DIR/$xlibdir"
> + jd_with_pcre_library="yes"
> + found=1
> + break
> +@@ -7054,56 +7055,7 @@ $as_echo "yes: $jd_pcre_library_dir and $jd_pcre_include_dir" >&6; }
> + then
> + PCRE_LIB=""
> + else
> +-
> +-if test "X$jd_pcre_library_dir" != "X"
> +-then
> +- if test "X$RPATH" = "X"
> +- then
> +-
> +-case "$host_os" in
> +- *linux*|*solaris* )
> +- if test "X$GCC" = Xyes
> +- then
> +- if test "X$ac_R_nospace" = "Xno"
> +- then
> +- RPATH="-Wl,-R,"
> +- else
> +- RPATH="-Wl,-R"
> +- fi
> +- else
> +- if test "X$ac_R_nospace" = "Xno"
> +- then
> +- RPATH="-R "
> +- else
> +- RPATH="-R"
> +- fi
> +- fi
> +- ;;
> +- *osf*|*openbsd*)
> +- if test "X$GCC" = Xyes
> +- then
> +- RPATH="-Wl,-rpath,"
> +- else
> +- RPATH="-rpath "
> +- fi
> +- ;;
> +- *netbsd*)
> +- if test "X$GCC" = Xyes
> +- then
> +- RPATH="-Wl,-R"
> +- fi
> +- ;;
> +-esac
> +-
> +- if test "X$RPATH" != "X"
> +- then
> +- RPATH="$RPATH$jd_pcre_library_dir"
> +- fi
> +- else
> +- RPATH="$RPATH:$jd_pcre_library_dir"
> +- fi
> +-fi
> +-
> ++ RPATH=""
> + fi
> +
> + PCRE_INC=-I$jd_pcre_include_dir
> +--
> +1.7.4.1
> +
> diff --git a/meta/recipes-extended/slang/slang_2.2.4.bb b/meta/recipes-extended/slang/slang_2.2.4.bb
> index 72dd99f..7082611 100644
> --- a/meta/recipes-extended/slang/slang_2.2.4.bb
> +++ b/meta/recipes-extended/slang/slang_2.2.4.bb
> @@ -10,7 +10,7 @@ to recode S-Lang procedures in C if you need to."
> HOMEPAGE = "http://www.jedsoft.org/slang/"
> SECTION = "libs"
> DEPENDS = "pcre"
> -PR = "r9"
> +PR = "r10"
>
> LICENSE = "GPLv2"
> LIC_FILES_CHKSUM = "file://COPYING;md5=a52a18a472d4f7e45479b06563717c02"
> @@ -18,6 +18,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=a52a18a472d4f7e45479b06563717c02"
>
> SRC_URI = "ftp://space.mit.edu/pub/davis/slang/v2.2/slang-${PV}.tar.bz2 \
> file://rpathfix.patch \
> + file://fix-check-pcre.patch \
> "
> SRC_URI_append_arm = " file://change-char-type-to-signed-char-in-macros.patch"
>
>
Merged into OE-Core
Thanks
Sau!
prev parent reply other threads:[~2012-07-26 20:19 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 8:07 [PATCH] slang 2.2.4: fix the pcre existence checking rongqing.li
2012-07-25 21:58 ` Saul Wold
2012-07-25 22:02 ` Saul Wold
2012-07-26 3:16 ` Rongqing Li
2012-07-26 20:08 ` Saul Wold [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5011A3B6.80606@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox