From: Mark Hatle <mark.hatle@windriver.com>
To: <openembedded-core@lists.openembedded.org>
Subject: Re: /usr/bin/python is needed by git
Date: Tue, 11 Sep 2012 08:04:10 -0500 [thread overview]
Message-ID: <504F36CA.9060007@windriver.com> (raw)
In-Reply-To: <504F05A8.3000207@communistcode.co.uk>
On 9/11/12 4:34 AM, Jack Mitchell wrote:
> I'm not sure where this issue is coming from so I'm just going to dump
> the output log and see if anyone bites. From what I can tell it is maybe
> an RPM dependency issue...?
>
> WARNING: Host distribution ""Arch Linux"" has not been validated with
> this version of the build system; you may possibly experience unexpected
> failures. It is recommended that you use a tested distribution.
> Loading cache: 100%
> |#########################################################################################################################################################################################################|
> ETA: 00:00:00
> Loaded 1206 entries from dependency cache.
> Parsing recipes: 100%
> |#######################################################################################################################################################################################################|
> Time: 00:00:00
> Parsing of 896 .bb files complete (894 cached, 2 parsed). 1205 targets,
> 57 skipped, 7 masked, 0 errors.
>
> Build Configuration:
> BB_VERSION = "1.15.3"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beaglebone"
> DISTRO = "poky"
> DISTRO_VERSION = "1.2+snapshot-20120911"
> TUNE_FEATURES = "armv7a vfp neon cortexa8"
> TARGET_FPU = "vfp-neon"
> meta
> meta-yocto = "master:7250638ec895bc89508711831083d43b9e1e9826"
> meta-ti = "master:7b54887b9505bb8334bfbe4094a2c396add8da48"
> meta-db = "master:4da6bda041dbbcee2d7464668de280d84c035fa9"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> WARNING: QA Issue: kmod: /bin/kmod, installed in the base_prefix,
> requires a shared library under exec_prefix (/usr): libkmod.so.2 =>
> /usr/lib/libkmod.so.2 (0xdead1000)
> WARNING: QA Issue: libpam: /lib/security/pam_cracklib.so, installed in
> the base_prefix, requires a shared library under exec_prefix (/usr):
> libcrack.so.2 => /usr/lib/libcrack.so.2 (0xdead3000)
> WARNING: QA Issue: libpam: /lib/security/pam_cracklib.so, installed in
> the base_prefix, requires a shared library under exec_prefix (/usr):
> libz.so.1 => /usr/lib/libz.so.1 (0xdead4000)
> WARNING: QA Issue: udev: /lib/libgudev-1.0.so.0.0.1, installed in the
> base_prefix, requires a shared library under exec_prefix (/usr):
> libgobject-2.0.so.0 => /usr/lib/libgobject-2.0.so.0 (0xdead2000)
> WARNING: QA Issue: udev: /lib/libgudev-1.0.so.0.0.1, installed in the
> base_prefix, requires a shared library under exec_prefix (/usr):
> libgthread-2.0.so.0 => /usr/lib/libgthread-2.0.so.0 (0xdead3000)
> WARNING: QA Issue: udev: /lib/libgudev-1.0.so.0.0.1, installed in the
> base_prefix, requires a shared library under exec_prefix (/usr):
> libffi.so.5 => /usr/lib/libffi.so.5 (0xdead4000)
> WARNING: QA Issue: udev: /lib/libgudev-1.0.so.0.0.1, installed in the
> base_prefix, requires a shared library under exec_prefix (/usr):
> libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xdead5000)
> WARNING: QA Issue: udev: /lib/udev/udev-acl, installed in the
> base_prefix, requires a shared library under exec_prefix (/usr):
> libglib-2.0.so.0 => /usr/lib/libglib-2.0.so.0 (0xdead2000)
> WARNING: QA Issue: php: Files/directories were installed but not shipped
> /mnt
> /mnt/storage
> /mnt/storage/yoctoBuilds
> /mnt/storage/yoctoBuilds/poky-beaglebone.git
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/sysroots
> ERROR: Function failed: do_rootfs (see
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/work/beaglebone-poky-linux-gnueabi/core-image-db-1.0-r0/temp/log.do_rootfs.15968
> for further information)
> ERROR: Logfile of failure stored in:
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/work/beaglebone-poky-linux-gnueabi/core-image-db-1.0-r0/temp/log.do_rootfs.15968
> Log data follows:
> | DEBUG: Executing shell function do_rootfs
> | Generating solve db for
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/deploy/rpm/beaglebone...
> | Generating solve db for
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/deploy/rpm/armv7a_vfp_neon...
> | Generating solve db for
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/deploy/rpm/all...
> | total: 1 0.000000 MB 88.851492 secs
> | fingerprint: 2487 0.065276 MB 0.731218 secs
> | install: 829 0.000000 MB 67.751171 secs
> | digest: 1658 11.934144 MB 0.117111 secs
> | signature: 1658 0.000000 MB 5.105333 secs
> | dbadd: 829 0.000000 MB 67.590105 secs
> | dbget: 17782 0.000000 MB 0.058949 secs
> | dbput: 829 6.853944 MB 57.990037 secs
> | readhdr: 8291 13.578976 MB 3.732102 secs
> | hdrload: 4452 21.570272 MB 0.088323 secs
> | hdrget: 159643 0.000000 MB 1.030783 secs
> | total: 1 0.000000 MB 190.089845 secs
> | fingerprint: 5034 0.089692 MB 1.256801 secs
> | install: 1678 0.000000 MB 146.995181 secs
> | digest: 3356 17.421210 MB 0.215644 secs
> | signature: 3356 0.000000 MB 9.807536 secs
> | dbadd: 1678 0.000000 MB 146.709467 secs
> | dbget: 34599 0.000000 MB 0.299620 secs
> | dbput: 1678 10.496148 MB 131.603615 secs
> | readhdr: 16781 20.750458 MB 9.085295 secs
> | hdrload: 8591 31.786302 MB 0.191107 secs
> | hdrget: 324291 0.000000 MB 2.933854 secs
> | total: 1 0.000000 MB 2.395373 secs
> | fingerprint: 36 0.000032 MB 0.000915 secs
> | install: 12 0.000000 MB 0.517583 secs
> | digest: 24 0.047656 MB 0.000381 secs
> | signature: 24 0.000000 MB 0.032788 secs
> | dbadd: 12 0.000000 MB 0.486005 secs
> | dbget: 59 0.000000 MB 0.000351 secs
> | dbput: 12 0.035820 MB 0.185407 secs
> | readhdr: 121 0.071560 MB 0.021102 secs
> | hdrload: 65 0.119208 MB 0.000533 secs
> | hdrget: 1814 0.000000 MB 0.003769 secs
> | Generating solve db for
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/deploy/rpm/all...
> | Processing task-core-boot...
> | Processing git...
> | Processing php-cgi...
> | Processing packagegroup-core-ssh-openssh...
> | Processing valgrind...
> | Processing libjansson4...
> | Processing hiawatha...
> | Processing htop...
> | Processing libwebsockets0...
> | Processing openssh-sftp-server...
> | error: Failed dependencies:
> | /usr/bin/python is needed by git-1.7.7-r2.armv7a_vfp_neon
Within the git package, there is a file that has a header similar to:
#! /usr/bin/python
This is incorrect, it should be /usr/bin/env python (or /bin/env python if you
flatten the filesystem).
Did you build the python package? If not I'd say there is probably a bug (or
bugs) in the git recipe.
--Mark
> | ERROR: Function failed: do_rootfs (see
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/beaglebone-db/tmp/work/beaglebone-poky-linux-gnueabi/core-image-db-1.0-r0/temp/log.do_rootfs.15968
> for further information)
> ERROR: Task 7
> (/mnt/storage/yoctoBuilds/poky-beaglebone.git/meta-db/recipes-core/images/core-image-db.bb,
> do_rootfs) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 2137 tasks of which 1805 didn't need to
> be rerun and 1 failed.
>
> Summary: 1 task failed:
> /mnt/storage/yoctoBuilds/poky-beaglebone.git/meta-db/recipes-core/images/core-image-db.bb,
> do_rootfs
> Summary: There were 10 WARNING messages shown.
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
>
>
next prev parent reply other threads:[~2012-09-11 13:17 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-11 9:34 /usr/bin/python is needed by git Jack Mitchell
2012-09-11 10:33 ` [PATCH] git: add missing Python dependency Jack Mitchell
2012-09-11 15:46 ` Mark Hatle
2012-09-11 13:04 ` Mark Hatle [this message]
2012-09-11 13:37 ` /usr/bin/python is needed by git Jack Mitchell
2012-09-11 21:02 ` Khem Raj
2012-09-11 21:39 ` Jack Mitchell
2012-09-13 12:58 ` [PATCH] git: define NO_PYTHON=1 to stop git requiring python as a dependancy Jack Mitchell
2012-09-14 15:54 ` Saul Wold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=504F36CA.9060007@windriver.com \
--to=mark.hatle@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox