From: Saul Wold <sgw@linux.intel.com>
To: Mark Hatle <mark.hatle@windriver.com>
Cc: openembedded-core@lists.openembedded.org
Subject: Re: [PATCH 21/22] pseudo: Rework target, native and nativesdk pseudo intergration
Date: Thu, 06 Dec 2012 09:21:35 -0800 [thread overview]
Message-ID: <50C0D41F.1050706@linux.intel.com> (raw)
In-Reply-To: <50C0CFE5.7000707@windriver.com>
On 12/06/2012 09:03 AM, Mark Hatle wrote:
> On 12/5/12 11:06 PM, Saul Wold wrote:
>> On 12/04/2012 09:14 AM, Mark Hatle wrote:
>>> Pseudo was not building and installing properly for systems where
>>> baselib
>>> was not 'lib'. This change reworks the three scenerios to work
>>> properly.
>>>
>>> Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
>>> ---
>>> meta/recipes-devtools/pseudo/pseudo.inc | 58
>>> ++++++++++++-------------
>>> meta/recipes-devtools/pseudo/pseudo_1.4.1.bb | 2 +-
>>> meta/recipes-devtools/pseudo/pseudo_git.bb | 2 +-
>>> 3 files changed, 30 insertions(+), 32 deletions(-)
>>>
>>> diff --git a/meta/recipes-devtools/pseudo/pseudo.inc
>>> b/meta/recipes-devtools/pseudo/pseudo.inc
>>> index 98f706c..8dc7d72 100644
>>> --- a/meta/recipes-devtools/pseudo/pseudo.inc
>>> +++ b/meta/recipes-devtools/pseudo/pseudo.inc
>>> @@ -13,34 +13,28 @@ SRC_URI_append_class-nativesdk = "
>>> file://symver.patch"
>>>
>>> SRC_URI_append_class-native = " file://symver.patch"
>>>
>>> -FILES_${PN} = "${libdir}/pseudo/lib*/libpseudo.so ${bindir}/*
>>> ${localstatedir}/pseudo ${prefix}/var/pseudo"
>>> -FILES_${PN}-dbg += "${libdir}/pseudo/lib*/.debug"
>>> +FILES_${PN} = "${prefix}/lib/pseudo/lib*/libpseudo.so ${bindir}/*
>>> ${localstatedir}/pseudo ${prefix}/var/pseudo"
>>> +FILES_${PN}-dbg += "${prefix}/lib/pseudo/lib*/.debug"
>>> PROVIDES += "virtual/fakeroot"
>>>
>>> MAKEOPTS = ""
>>>
>>> inherit siteinfo
>>>
>>> -do_configure () {
>>> - :
>>> -}
>>> -
>>> -NO32LIBS ??= "1"
>>> -
>>> -# Compile for the local machine arch...
>>> -do_compile () {
>>> +do_configure_class-target () {
>>> if [ "${SITEINFO_BITS}" = "64" ]; then
>>> - ${S}/configure --prefix=${prefix}
>>> --libdir=${prefix}/lib/pseudo/lib${SITEINFO_BITS}
>>> --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix}
>>> --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite
>>> --without-rpath
>>> + mylibdir=${prefix}/lib/pseudo/lib${SITEINFO_BITS}
>>> else
>>> - ${S}/configure --prefix=${prefix}
>>> --libdir=${prefix}/lib/pseudo/lib
>>> --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix}
>>> --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite
>>> --without-rpath
>>> + mylibdir=${prefix}/lib/pseudo/lib
>>> fi
>>> - oe_runmake ${MAKEOPTS}
>>> + ${S}/configure --prefix=${prefix} --libdir=$mylibdir
>>> --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --without-rpath
>>
>> You seem to have dropped the --with-sqlite and now it does not find
>> sqlite3.h for the target build as can be seen in the build appliance
>> failure.
>
> It should be sourcing it from the compiler with a #include. It was
> working on all of my test builds.
>
Not that I am aware of, the configure script defaults to /usr, is it
possible you have a host contamination issue with sqlite3 installed on
your machine?
> But either way, there are two bugs here.. the first is pseudo isn't
> building for the target -- it wasn't before either.
>
It has been building on the target in the past since we need it for the
Build Appliance and it builds in world.
> But the real issue is -why on earth- are we building pseudo at all for
> the target. It serves no purpose that I am aware of.
>
Build Appliance needs it.
> I'd prefer if the fix was simply to disable pseudo for target-class
> builds, and only build it for -native and -nativesdk cases.
>
Not really an option
> Just drop this patch for now -- we can focus on fixing it a different
> way if target builds of pseudo are needed for some reason.
>
consider it dropped.
Sau!
> --Mark
>
>> http://autobuilder.yoctoproject.org:8010/builders/build-appliance/builds/154/steps/shell_46/logs/stdio
>>
>>
>> Sau!
>>
>>> }
>>>
>>> -# Two below are the same
>>> +NO32LIBS ??= "1"
>>> +
>>> # If necessary compile for the alternative machine arch. This is
>>> only
>>> # necessary in a native build.
>>> -do_compile_prepend_class-native () {
>>> +do_compile_native() {
>>> if [ "${SITEINFO_BITS}" = "64" -a -e
>>> "/usr/include/gnu/stubs-32.h" -a "${PN}" = "pseudo-native" -a
>>> "${NO32LIBS}" != "1" ]; then
>>> # We need the 32-bit libpseudo on a 64-bit machine...
>>> # ... and we really, really, hope that the native
>>> host is
>>> @@ -56,18 +50,20 @@ do_compile_prepend_class-native () {
>>> # prevent it from removing the lib, but remove everything
>>> else
>>> make 'LIB=foo' ${MAKEOPTS} distclean
>>> fi
>>> + if [ "${SITEINFO_BITS}" = "64" ]; then
>>> + ${S}/configure --prefix=${prefix}
>>> --libdir=${prefix}/lib/pseudo/lib${SITEINFO_BITS}
>>> --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix}
>>> --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite
>>> --without-rpath
>>> + else
>>> + ${S}/configure --prefix=${prefix}
>>> --libdir=${prefix}/lib/pseudo/lib
>>> --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix}
>>> --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite
>>> --without-rpath
>>> + fi
>>> + oe_runmake ${MAKEOPTS}
>>> }
>>>
>>> -do_compile_prepend_class-nativesdk () {
>>> - if [ "${SITEINFO_BITS}" = "64" -a -e
>>> "/usr/include/gnu/stubs-32.h" -a "${PN}" = "pseudo-native" -a
>>> "${NO32LIBS}" != "1" ]; then
>>> - # We need the 32-bit libpseudo on a 64-bit machine...
>>> - # ... and we really, really, hope that the native
>>> host is
>>> - # x86, or else --bits may not work.
>>> - ./configure --prefix=${prefix}
>>> --libdir=${prefix}/lib/pseudo/lib
>>> --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --bits=32
>>> --without-rpath
>>> - oe_runmake ${MAKEOPTS} libpseudo
>>> - # prevent it from removing the lib, but remove everything else
>>> - make 'LIB=foo' ${MAKEOPTS} distclean
>>> - fi
>>> +do_compile_class-native () {
>>> + do_compile_native
>>> +}
>>> +
>>> +do_compile_class-nativesdk () {
>>> + do_compile_native
>>> }
>>>
>>> do_install () {
>>> @@ -77,18 +73,20 @@ do_install () {
>>> # Two below are the same
>>> # If necessary install for the alternative machine arch. This is
>>> only
>>> # necessary in a native build.
>>> -do_install_append_class-native () {
>>> +do_install_native () {
>>> if [ "${SITEINFO_BITS}" = "64" -a -e
>>> "/usr/include/gnu/stubs-32.h" -a "${PN}" = "pseudo-native" -a
>>> "${NO32LIBS}" != "1" ]; then
>>> mkdir -p ${D}${prefix}/lib/pseudo/lib
>>> cp lib/pseudo/lib/libpseudo.so ${D}${prefix}/lib/pseudo/lib/.
>>> fi
>>> + oe_runmake 'DESTDIR=${D}' ${MAKEOPTS}
>>> 'LIB=lib/pseudo/lib$(MARK64)' install
>>> +}
>>> +
>>> +do_install_class-native () {
>>> + do_install_native
>>> }
>>>
>>> do_install_append_class-nativesdk () {
>>> - if [ "${SITEINFO_BITS}" = "64" -a -e
>>> "/usr/include/gnu/stubs-32.h" -a "${PN}" = "pseudo-native" -a
>>> "${NO32LIBS}" != "1" ]; then
>>> - mkdir -p ${D}${prefix}/lib/pseudo/lib
>>> - cp lib/pseudo/lib/libpseudo.so ${D}${prefix}/lib/pseudo/lib/.
>>> - fi
>>> + do_install_native
>>> }
>>>
>>> BBCLASSEXTEND = "native nativesdk"
>>> diff --git a/meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
>>> b/meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
>>> index 70fe9c0..8367a34 100644
>>> --- a/meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
>>> +++ b/meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
>>> @@ -1,6 +1,6 @@
>>> require pseudo.inc
>>>
>>> -PR = "r13"
>>> +PR = "r14"
>>>
>>> SRC_URI =
>>> "http://www.yoctoproject.org/downloads/${BPN}/${BPN}-${PV}.tar.bz2"
>>>
>>> diff --git a/meta/recipes-devtools/pseudo/pseudo_git.bb
>>> b/meta/recipes-devtools/pseudo/pseudo_git.bb
>>> index e394ffb..c8ec5ad 100644
>>> --- a/meta/recipes-devtools/pseudo/pseudo_git.bb
>>> +++ b/meta/recipes-devtools/pseudo/pseudo_git.bb
>>> @@ -2,7 +2,7 @@ require pseudo.inc
>>>
>>> SRCREV = "398a264490713c912b4ce465251a8a82a7905f45"
>>> PV = "1.4.1+git${SRCPV}"
>>> -PR = "r28"
>>> +PR = "r29"
>>>
>>> DEFAULT_PREFERENCE = "-1"
>>>
>>>
>
>
>
next prev parent reply other threads:[~2012-12-06 17:36 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-04 17:14 [PATCH 00/22] Misc fixes Mark Hatle
2012-12-04 17:14 ` [PATCH 01/22] cpio: Split RMT from cpio Mark Hatle
2012-12-04 17:14 ` [PATCH 02/22] tar: Split RMT from tar Mark Hatle
2012-12-04 17:14 ` [PATCH 03/22] update-alternatives.bbclass: Add missing runtime dependency Mark Hatle
2012-12-04 17:04 ` Martin Jansa
2012-12-04 17:34 ` Mark Hatle
2012-12-04 20:46 ` Richard Purdie
2012-12-05 1:47 ` Mark Hatle
2012-12-05 9:17 ` Richard Purdie
2012-12-04 17:14 ` [PATCH 04/22] package_rpm.bbclass: Add the runtime dependencies to the pre/post scriptlets Mark Hatle
2012-12-04 17:14 ` [PATCH 05/22] rpm: enable _openall_before_chroot by default Mark Hatle
2012-12-04 17:14 ` [PATCH 06/22] rpm: Move rpmdb_loadcvt from base to dev package Mark Hatle
2012-12-04 17:14 ` [PATCH 07/22] rpm: Fix rpm relocation macro usage Mark Hatle
2012-12-04 17:14 ` [PATCH 08/22] rpm: Fixup platform matching code Mark Hatle
2012-12-04 17:14 ` [PATCH 09/22] rpm: Fix Upstream-Status fields Mark Hatle
2012-12-04 17:14 ` [PATCH 10/22] createrepo: implement support for recommends Mark Hatle
2012-12-04 17:14 ` [PATCH 11/22] python-smartpm: add " Mark Hatle
2012-12-04 17:14 ` [PATCH 12/22] python-smartpm: style fixes Mark Hatle
2012-12-04 17:14 ` [PATCH 13/22] python-smartpm: fix package metadata not being read from rpm-md feeds Mark Hatle
2012-12-04 17:14 ` [PATCH 14/22] python-smartpm: don't create /var/tmp on every rpm database open Mark Hatle
2012-12-04 17:14 ` [PATCH 15/22] python-smartpm: support nolinktos and noparentdirs rpm options Mark Hatle
2012-12-04 17:14 ` [PATCH 16/22] python-smartpm: allow setting arbitrary macros in smart config Mark Hatle
2012-12-04 17:14 ` [PATCH 17/22] python-smartpm: Fix incorrect comparison arguments Mark Hatle
2012-12-04 17:14 ` [PATCH 18/22] shadow: add runtime dependency on base-passwd Mark Hatle
2012-12-04 17:14 ` [PATCH 19/22] package_deb: Dependencies with a ( or ) in them are invalid in debs Mark Hatle
2012-12-04 17:14 ` [PATCH 20/22] pkgconfig: Add a manual dependency of pkgconfig(pkg-config) Mark Hatle
2012-12-06 13:16 ` Paul Eggleton
2012-12-06 17:13 ` Mark Hatle
2012-12-06 13:30 ` Otavio Salvador
2012-12-06 17:12 ` Mark Hatle
2012-12-04 17:14 ` [PATCH 21/22] pseudo: Rework target, native and nativesdk pseudo intergration Mark Hatle
2012-12-06 5:06 ` Saul Wold
2012-12-06 17:03 ` Mark Hatle
2012-12-06 17:21 ` Saul Wold [this message]
2012-12-06 17:28 ` Mark Hatle
2012-12-06 17:39 ` Saul Wold
2012-12-04 17:14 ` [PATCH 22/22] license.bbclass: Avoid grep error message Mark Hatle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50C0D41F.1050706@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=mark.hatle@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox