From: Saul Wold <sgw@linux.intel.com>
To: Laszlo Papp <lpapp@kde.org>
Cc: openembedded-core <openembedded-core@lists.openembedded.org>
Subject: Re: [PATCH] u-boot: update to 2013.07
Date: Tue, 06 Aug 2013 07:05:12 -0700 [thread overview]
Message-ID: <52010298.1060708@linux.intel.com> (raw)
In-Reply-To: <CAOMwXhNYeqM6m_R0eTpqHjK-E9d6qmqQw7aGeOJEEqOeByw29A@mail.gmail.com>
On 08/06/2013 01:39 AM, Laszlo Papp wrote:
> Which poky version have you used?
>
Laszlo, I am working against master.
Sau!
>
> On Mon, Aug 5, 2013 at 6:18 PM, Laszlo Papp <lpapp@kde.org
> <mailto:lpapp@kde.org>> wrote:
>
> Yes, of course I tested it, but unfortunately I do not have any free
> time in the near future to update this change.
>
>
> On Mon, Aug 5, 2013 at 5:49 PM, Saul Wold <sgw@linux.intel.com
> <mailto:sgw@linux.intel.com>> wrote:
>
> On 08/03/2013 02:17 AM, Laszlo Papp wrote:
>
> Signed-off-by: Laszlo Papp <lpapp@kde.org
> <mailto:lpapp@kde.org>>
> ---
> meta/recipes-bsp/u-boot/u-__boot-fw-utils_2013.07.bb
> <http://u-boot-fw-utils_2013.07.bb> | 26 +++++++++++++++++++++
> meta/recipes-bsp/u-boot/u-__boot-mkimage_2013.07.bb
> <http://u-boot-mkimage_2013.07.bb> | 27 ++++++++++++++++++++++
> meta/recipes-bsp/u-boot/u-__boot_2013.07.bb
> <http://u-boot_2013.07.bb> | 25 ++++++++++++++++++++
> 3 files changed, 78 insertions(+)
> create mode 100644
> meta/recipes-bsp/u-boot/u-__boot-fw-utils_2013.07.bb
> <http://u-boot-fw-utils_2013.07.bb>
> create mode 100644
> meta/recipes-bsp/u-boot/u-__boot-mkimage_2013.07.bb
> <http://u-boot-mkimage_2013.07.bb>
> create mode 100644
> meta/recipes-bsp/u-boot/u-__boot_2013.07.bb
> <http://u-boot_2013.07.bb>
>
> diff --git
> a/meta/recipes-bsp/u-boot/u-__boot-fw-utils_2013.07.bb
> <http://u-boot-fw-utils_2013.07.bb>
> b/meta/recipes-bsp/u-boot/u-__boot-fw-utils_2013.07.bb
> <http://u-boot-fw-utils_2013.07.bb>
> new file mode 100644
> index 0000000..8d13151
> --- /dev/null
> +++ b/meta/recipes-bsp/u-boot/u-__boot-fw-utils_2013.07.bb
> <http://u-boot-fw-utils_2013.07.bb>
> @@ -0,0 +1,26 @@
> +DESCRIPTION = "U-boot bootloader fw_printenv/setenv utils"
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM =
> "file://COPYING;md5=__1707d6db1d42237583f50183a5651e__cb \
> +
> file://README;beginline=1;__endline=22;md5=__5ba4218ac89af7846802d0348df3fb__90"
>
>
> Please note that the md5sum for the README for fw-utils is
> different than the other 2 below, and since they are all derived
> from the same tarball, that means something must be wrong with
> the above, did you test with a clean build.
>
> Sau!
>
>
> +SECTION = "bootloader"
> +
> +DEPENDS = "mtd-utils"
> +
> +SRC_URI =
> "ftp://ftp.denx.de/pub/u-boot/__u-boot-${PV}.tar.bz2
> <ftp://ftp.denx.de/pub/u-boot/u-boot-$%7BPV%7D.tar.bz2>"
> +
> +SRC_URI[md5sum] = "__0cc5026aad02f218a9b9ac56b301c9__7a"
> +SRC_URI[sha256sum] =
> "__362ddb935885da98cf461eba08f31e__3e59d0c4ada6cb2fa15596f43af310__ba8b"
> +
> +S = "${WORKDIR}/u-boot-${PV}"
> +
> +EXTRA_OEMAKE = 'HOSTCC="${CC}"'
> +
> +do_compile () {
> + oe_runmake env
> +}
> +
> +do_install () {
> + install -d ${D}${base_sbindir}
> + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${base_sbindir}/fw___printenv
> + install -m 755 ${S}/tools/env/fw_printenv
> ${D}${base_sbindir}/fw_setenv
> +}
> diff --git
> a/meta/recipes-bsp/u-boot/u-__boot-mkimage_2013.07.bb
> <http://u-boot-mkimage_2013.07.bb>
> b/meta/recipes-bsp/u-boot/u-__boot-mkimage_2013.07.bb
> <http://u-boot-mkimage_2013.07.bb>
> new file mode 100644
> index 0000000..0108e00
> --- /dev/null
> +++ b/meta/recipes-bsp/u-boot/u-__boot-mkimage_2013.07.bb
> <http://u-boot-mkimage_2013.07.bb>
> @@ -0,0 +1,27 @@
> +DESCRIPTION = "U-boot bootloader mkimage tool"
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM =
> "file://COPYING;md5=__1707d6db1d42237583f50183a5651e__cb \
> +
> file://README;beginline=1;__endline=22;md5=__78b195c11cb6ef63e6985140db7d7b__ab"
> +SECTION = "bootloader"
> +
> +SRC_URI =
> "ftp://ftp.denx.de/pub/u-boot/__u-boot-${PV}.tar.bz2
> <ftp://ftp.denx.de/pub/u-boot/u-boot-$%7BPV%7D.tar.bz2>"
> +
> +SRC_URI[md5sum] = "__8445162690052e6afd4b8f87af2bb5__57"
> +SRC_URI[sha256sum] =
> "__2bbd440c1b29928d230604eac372fd__a5152d3ae23f52b1910c77fc5bf531__250b"
> +
> +S = "${WORKDIR}/u-boot-${PV}"
> +
> +BBCLASSEXTEND = "native nativesdk"
> +
> +EXTRA_OEMAKE = 'HOSTCC="${CC}" HOSTLD="${LD}"
> HOSTLDFLAGS="${LDFLAGS}" HOSTSTRIP=true'
> +
> +do_compile () {
> + oe_runmake tools
> +}
> +
> +do_install () {
> + install -d ${D}${bindir}
> + install -m 0755 tools/mkimage ${D}${bindir}/uboot-mkimage
> + ln -sf uboot-mkimage ${D}${bindir}/mkimage
> +}
> +
> diff --git a/meta/recipes-bsp/u-boot/u-__boot_2013.07.bb
> <http://u-boot_2013.07.bb>
> b/meta/recipes-bsp/u-boot/u-__boot_2013.07.bb
> <http://u-boot_2013.07.bb>
> new file mode 100644
> index 0000000..8e05558
> --- /dev/null
> +++ b/meta/recipes-bsp/u-boot/u-__boot_2013.07.bb
> <http://u-boot_2013.07.bb>
> @@ -0,0 +1,25 @@
> +require u-boot.inc
> +
> +# To build u-boot for your machine, provide the following
> lines in your machine
> +# config, replacing the assignments as appropriate for your
> machine.
> +# UBOOT_MACHINE = "omap3_beagle_config"
> +# UBOOT_ENTRYPOINT = "0x80008000"
> +# UBOOT_LOADADDRESS = "0x80008000"
> +
> +LICENSE = "GPLv2+"
> +LIC_FILES_CHKSUM =
> "file://COPYING;md5=__1707d6db1d42237583f50183a5651e__cb \
> +
> file://README;beginline=1;__endline=22;md5=__78b195c11cb6ef63e6985140db7d7b__ab"
> +
> +FILESDIR =
> "${@os.path.dirname(d.getVar('__FILE',1))}/u-boot-git/${__MACHINE}"
> +
> +# This revision corresponds to the tag "v2013.07"
> +# We use the revision in order to avoid having to fetch it
> from the repo during parse
> +SRCREV = "__62c175fbb8a0f9a926c88294ea9f7e__88eb898f6c"
> +
> +PV = "v2013.07+git${SRCPV}"
> +
> +SRC_URI =
> "git://git.denx.de/u-boot.git;__branch=master;protocol=git
> <http://git.denx.de/u-boot.git;branch=master;protocol=git>"
> +
> +S = "${WORKDIR}/git"
> +
> +PACKAGE_ARCH = "${MACHINE_ARCH}"
>
>
>
next prev parent reply other threads:[~2013-08-06 14:05 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-03 9:17 [PATCH] u-boot: update to 2013.07 Laszlo Papp
2013-08-03 17:53 ` Otavio Salvador
2013-08-03 18:12 ` Laszlo Papp
2013-08-03 20:00 ` Saul Wold
2013-08-03 20:05 ` Otavio Salvador
2013-08-05 4:09 ` Saul Wold
2013-08-05 16:49 ` Saul Wold
[not found] ` <CAOMwXhN_0SgvFEY1ai9ZntkC-zPCBgbUaQNjqPeoNe931Xr_8w@mail.gmail.com>
[not found] ` <CAOMwXhNYeqM6m_R0eTpqHjK-E9d6qmqQw7aGeOJEEqOeByw29A@mail.gmail.com>
2013-08-06 14:05 ` Saul Wold [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-08-26 18:06 Laszlo Papp
2013-08-23 9:48 Laszlo Papp
2013-08-23 16:57 ` Laszlo Papp
2013-08-23 21:56 ` Saul Wold
2013-08-24 4:31 ` Saul Wold
2013-08-26 17:55 ` Saul Wold
2013-08-26 21:48 ` Peter A. Bigot
2013-08-26 21:55 ` Laszlo Papp
2013-08-26 22:03 ` Bruce Ashfield
2013-08-27 10:45 ` Laszlo Papp
2013-08-27 19:57 ` Randy MacLeod
2013-08-27 20:03 ` Laszlo Papp
2013-08-27 20:08 ` Martin Jansa
2013-08-27 23:29 ` Richard Purdie
2013-08-28 3:50 ` Randy MacLeod
2013-08-29 7:16 ` jhuang0
2013-08-28 16:00 ` Khem Raj
2013-08-22 20:36 Laszlo Papp
2013-08-22 21:14 ` Laszlo Papp
2013-08-23 7:26 ` Laszlo Papp
2013-08-15 4:25 Laszlo Papp
2013-08-15 9:16 ` Jack Mitchell
2013-08-15 10:36 ` Laszlo Papp
2013-07-31 13:16 Laszlo Papp
2013-07-31 13:24 ` Burton, Ross
2013-07-31 15:13 ` Laszlo Papp
2013-07-31 13:14 Laszlo Papp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52010298.1060708@linux.intel.com \
--to=sgw@linux.intel.com \
--cc=lpapp@kde.org \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox