From: Mike Looijmans <mike.looijmans@topic.nl>
To: Hongxu Jia <hongxu.jia@windriver.com>
Cc: openembedded-core@lists.openembedded.org
Subject: Re: [PATCH 1/1] kernel.bbclass: Need a method to install/update for bzImage
Date: Fri, 13 Sep 2013 10:51:11 +0200 [thread overview]
Message-ID: <5232D1FF.30603@topic.nl> (raw)
In-Reply-To: <5231AD8C.9030509@windriver.com>
On 09/12/2013 02:03 PM, Hongxu Jia wrote:
> On 09/12/2013 05:47 PM, Mike Looijmans wrote:
>> This change just assumes that all boot systems are alike. Just
>> applying this patch "as is" will probably break a lot of embedded
>> systems that have totally different ways of upgrading the kernel. Best
>> scenario is that they'll waste time and space running scripts that
>> will have no effect.
>>
>> It should be possible - and more important: default - to NOT include
>> these scripts, and use them only on targets they apply to.
>> kernel.bbclass is in my opinion not the correct location.
>>
>
> Yes, we should add a on-off to decide whether the method should be used
> or not,
> and set off by default.
>
> But I could not find a better location to do this, almost all of targets
> in oe-core may
> need this, do you have any suggestions?
My intuition says, just create a "kernel-grub.bbclass". I don't see
anything wrong with that yet.
On the other hand, it's more of a thing I'd expect in BSP or machine
support layer.
Mike.
>> Otherwise, should I add my kernel postinstall script that writes the
>> kernel into an MTD block on an embedded target to this class as well?
>> And a NAND version? And SD?
>>
>> Mike.
>>
>>
>> On 09/12/2013 11:25 AM, Hongxu Jia wrote:
>>> While installing a rpm to update kernel on a deployed target, it will
>>> update
>>> the boot area and the boot menu with the kernel as the priority but
>>> allow
>>> you to fall back to the original kernel as well.
>>>
>>> - In pre-install script, it backs up original kernel to avoid
>>> confliction with
>>> new one.
>>> - In post-install script, it updates the new kernel as the boot
>>> priority.
>>>
>>> [YOCTO #4104]
>>>
>>> Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
>>> ---
>>> meta/classes/kernel.bbclass | 65
>>> +++++++++++++++++++++++++++++++++++++++++++++
>>> 1 file changed, 65 insertions(+)
>>>
>>> diff --git a/meta/classes/kernel.bbclass b/meta/classes/kernel.bbclass
>>> index e039dfc..f0dd679 100644
>>> --- a/meta/classes/kernel.bbclass
>>> +++ b/meta/classes/kernel.bbclass
>>> @@ -263,7 +263,72 @@ ALLOW_EMPTY_kernel-image = "1"
>>> ALLOW_EMPTY_kernel-modules = "1"
>>> DESCRIPTION_kernel-modules = "Kernel modules meta package"
>>>
>>> +pkg_preinst_kernel-image () {
>>> + if [ -z "$D" ]; then
>>> + # Parsing confliction
>>> + [ -f /boot/grub/menu.list ] && grubcfg="/boot/grub/menu.list"
>>> + [ -f /boot/grub/grub.cfg ] && grubcfg="/boot/grub/grub.cfg"
>>> + if [ -n "$grubcfg" ]; then
>>> + # Dereference symlink to avoid confliction with new
>>> kernel name.
>>> + if grep -q "/${KERNEL_IMAGETYPE} root=" $grubcfg; then
>>> + kimage=`realpath /boot/${KERNEL_IMAGETYPE}`;
>>> + sed -i "s#${KERNEL_IMAGETYPE} root=#${kimage##*/}
>>> root=#" $grubcfg
>>> + fi
>>> +
>>> + # Rename old kernel if it conflicts with new kernel name.
>>> + if grep -q "/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
>>> root=" $grubcfg; then
>>> + timestamp=`date +%s`
>>> + kimage="/boot/${KERNEL_IMAGETYPE}-${KERNEL_VERSION}-$timestamp-back"
>>> + sed -i "s#${KERNEL_IMAGETYPE}-${KERNEL_VERSION}
>>> root=#${kimage##*/} root=#" $grubcfg
>>> + mv /boot/${KERNEL_IMAGETYPE}-${KERNEL_VERSION} $kimage
>>> + fi
>>> + fi
>>> + fi
>>> +}
>>> +
>>> pkg_postinst_kernel-image () {
>>> + get_new_grub_cfg() {
>>> + title="Update ${KERNEL_IMAGETYPE}-${KERNEL_VERSION}-${PV}"
>>> + if [ -f /boot/grub/grub.cfg ]; then
>>> + rootfs=`grep " *linux [^ ].* root=" /boot/grub/grub.cfg
>>> -m 1 | \
>>> + sed "s# *linux [^ ].* root=# linux
>>> /${KERNEL_IMAGETYPE}-${KERNEL_VERSION} root=#"`
>>> +
>>> + echo "menuentry \"$title\" {"
>>> + echo " set root=(hd0,1)"
>>> + echo "$rootfs"
>>> + echo "}"
>>> + elif [ -f /boot/grub/menu.list ] ; then
>>> + rootfs=`grep "kernel [^ ].* root=" /boot/grub/menu.list
>>> -m 1 | \
>>> + sed "s#kernel [^ ].* root=#kernel
>>> /${KERNEL_IMAGETYPE}-${KERNEL_VERSION} root=#"`
>>> +
>>> + echo "default 0"
>>> + echo "timeout 30"
>>> + echo "title $title"
>>> + echo "root (hd0,0)"
>>> + echo "$rootfs"
>>> + fi
>>> + }
>>> +
>>> + get_old_grub_cfg() {
>>> + if [ -f /boot/grub/grub.cfg ]; then
>>> + cat /boot/grub/grub.cfg
>>> + elif [ -f /boot/grub/menu.list ] ; then
>>> + cat /boot/grub/menu.list | sed -e '/^default/d' -e
>>> '/^timeout/d'
>>> + fi
>>> + }
>>> +
>>> + if [ -z "$D" ]; then
>>> + [ -f /boot/grub/menu.list ] && grubcfg="/boot/grub/menu.list"
>>> + [ -f /boot/grub/grub.cfg ] && grubcfg="/boot/grub/grub.cfg"
>>> + if [ -n "$grubcfg" ]; then
>>> + grubcfgtmp="$grubcfg.tmp"
>>> + get_new_grub_cfg > $grubcfgtmp
>>> + get_old_grub_cfg >> $grubcfgtmp
>>> + mv $grubcfgtmp $grubcfg
>>> + echo "Caution! Update kernel may affect kernel-module!"
>>> + fi
>>> + fi
>>> +
>>> update-alternatives --install
>>> /${KERNEL_IMAGEDEST}/${KERNEL_IMAGETYPE} ${KERNEL_IMAGETYPE}
>>> ${KERNEL_IMAGETYPE}-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
>>> if [ ! -e "$D/lib/modules/${KERNEL_VERSION}" ]; then
>>> mkdir -p $D/lib/modules/${KERNEL_VERSION}
>>>
>>
>>
>>
>> Met vriendelijke groet / kind regards,
>>
>> Mike Looijmans
>>
>> TOPIC Embedded Systems
>> Eindhovenseweg 32-C, NL-5683 KH Best
>> Postbus 440, NL-5680 AK Best
>> Telefoon: (+31) – (0)499 - 33.69.79
>> Telefax: (+31) - (0)499 - 33.69.70
>> E-mail: mike.looijmans@topic.nl
>> Website: www.topic.nl
>>
>> Dit e-mail bericht en de eventueel daarbij behorende bijlagen zijn
>> uitsluitend bestemd voor de geadresseerde, zoals die blijkt uit het
>> e-mail bericht en/of de bijlagen. Er kunnen gegevens met betrekking
>> tot een derde instaan. Indien u als niet-geadresseerde dit bericht en
>> de bijlagen ontvangt, terwijl u niet bevoegd of gemachtigd bent om dit
>> bericht namens de geadresseerde te ontvangen, wordt u verzocht de
>> afzender hierover direct te informeren en het e-mail bericht met de
>> bijlagen te vernietigen. Ieder gebruik van de inhoud van het e-mail
>> bericht, waaronder de daarbij behorende bijlagen, door een ander dan
>> de geadresseerde is onrechtmatig jegens ons dan wel de eventueel in
>> het e-mail bericht of de bijlagen voorkomende andere personen. TOPIC
>> Embedded Systems is niet aansprakelijk voor enigerlei schade
>> voortvloeiend uit het gebruik en/of acceptatie van dit e-mail bericht
>> of de daarbij behorende bijlagen.
>>
>> The contents of this message, as well as any enclosures, are addressed
>> personally to, and thus solely intended for the addressee. They may
>> contain information regarding a third party. A recipient who is
>> neither the addressee, nor empowered to receive this message on behalf
>> of the addressee, is kindly requested to immediately inform the sender
>> of receipt, and to destroy the message and the enclosures. Any use of
>> the contents of this message and/or the enclosures by any other person
>> than the addressee or person who is empowered to receive this message,
>> is illegal towards the sender and/or the aforementioned third party.
>> TOPIC Embedded Systems is not liable for any damage as a result of
>> the use and/or acceptance of this message and as well as any enclosures.
>
>
Met vriendelijke groet / kind regards,
Mike Looijmans
TOPIC Embedded Systems
Eindhovenseweg 32-C, NL-5683 KH Best
Postbus 440, NL-5680 AK Best
Telefoon: (+31) – (0)499 - 33.69.79
Telefax: (+31) - (0)499 - 33.69.70
E-mail: mike.looijmans@topic.nl
Website: www.topic.nl
Dit e-mail bericht en de eventueel daarbij behorende bijlagen zijn uitsluitend bestemd voor de geadresseerde, zoals die blijkt uit het e-mail bericht en/of de bijlagen. Er kunnen gegevens met betrekking tot een derde instaan. Indien u als niet-geadresseerde dit bericht en de bijlagen ontvangt, terwijl u niet bevoegd of gemachtigd bent om dit bericht namens de geadresseerde te ontvangen, wordt u verzocht de afzender hierover direct te informeren en het e-mail bericht met de bijlagen te vernietigen. Ieder gebruik van de inhoud van het e-mail bericht, waaronder de daarbij behorende bijlagen, door een ander dan de geadresseerde is onrechtmatig jegens ons dan wel de eventueel in het e-mail bericht of de bijlagen voorkomende andere personen. TOPIC Embedded Systems is niet aansprakelijk voor enigerlei schade voortvloeiend uit het gebruik en/of acceptatie van dit e-mail bericht of de daarbij behorende bijlagen.
The contents of this message, as well as any enclosures, are addressed personally to, and thus solely intended for the addressee. They may contain information regarding a third party. A recipient who is neither the addressee, nor empowered to receive this message on behalf of the addressee, is kindly requested to immediately inform the sender of receipt, and to destroy the message and the enclosures. Any use of the contents of this message and/or the enclosures by any other person than the addressee or person who is empowered to receive this message, is illegal towards the sender and/or the aforementioned third party. TOPIC Embedded Systems is not liable for any damage as a result of the use and/or acceptance of this message and as well as any enclosures.
_______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
prev parent reply other threads:[~2013-09-13 8:51 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-12 9:25 [PATCH 0/1] kernel.bbclass: Need a method to install/update for bzImage Hongxu Jia
2013-09-12 9:25 ` [PATCH 1/1] " Hongxu Jia
2013-09-12 9:47 ` Mike Looijmans
2013-09-12 12:03 ` Hongxu Jia
2013-09-13 8:51 ` Mike Looijmans [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5232D1FF.30603@topic.nl \
--to=mike.looijmans@topic.nl \
--cc=hongxu.jia@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox