From: Mark Hatle <mark.hatle@windriver.com>
To: <openembedded-core@lists.openembedded.org>,
"Seebach, Peter" <Peter.Seebach@windriver.com>
Subject: Re: [PATCH 0/2] Use alternatives for all of binutils instead of -symlinks
Date: Wed, 16 Oct 2013 14:18:21 -0500 [thread overview]
Message-ID: <525EE67D.7040709@windriver.com> (raw)
In-Reply-To: <525EC341.9080407@linux.intel.com>
On 10/16/13 11:48 AM, Saul Wold wrote:
>
> During MUT builds, we saw a failure with the toolchain
>
>
> | Computing transaction...error: Can't install
> binutils-cross-canadian-arm-2.23.2-r4@i686_nativesdk: no package
> provides update-alternatives-cworth
> |
>
> Can be seen all architectures.
Sounds like the new code needs to be restricted to 'class-target'.
--Mark
>
> Sau!
>
>
>
> On 10/10/2013 01:06 PM, Peter Seebach wrote:
>> The original complaint that got me started on this was that someone
>> was using binutils on a target, and didn't have an ld command, so they
>> asked for it. We added binutils-symlinks, and that seemed to work, but
>> eventually we ran into a problem because "ar" and "strings" weren't
>> showing up.
>>
>> After some asking about as to why ar and strings might be omitted from
>> binutils, we concluded that it was probably because they were using
>> the alternatives mechanism. In a local branch, we experimented for a while
>> with just using that instead of the -symlinks package, and found that
>> it was overall better-behaved; in particular, it produces the desireable
>> result that you don't have to know about or add a "-symlinks" package
>> to use the utilities in the common case where you just install a package
>> and expect its binaries to show up. It also eliminates the odd special
>> case difference between ar/strings (which can be provided by busybox)
>> and the other utilities.
>>
>> This is implemented as two patches. The first switches to using the
>> alternatives mechanism, but leaves the alternatives in the -symlinks
>> package rather than in the base package. The second moves them into
>> the base package, and adds an RPROVIDES for the -symlinks name in
>> case anyone is using it.
>>
>> One caveat: This can produce warnings because the "embedspu" and "ld.gold"
>> binaries don't always exist, but they sometimes exist. I'm not sure whether
>> there's a good way to fix that...
>>
>> The following changes since commit 1149b1fef8912f77d971242dfec151fff5a3aa51:
>>
>> build-appliance: Update SRCREV for release (2013-10-08 16:33:25 +0100)
>>
>> are available in the git repository at:
>> git://git.yoctoproject.org/poky-contrib seebs/binutils-alternatives
>> http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=seebs/binutils-alternatives
>>
>> Peter Seebach (2):
>> Use alternatives for the binutils-symlinks package.
>> Drop binutils-symlinks
>>
>> meta/recipes-devtools/binutils/binutils.inc | 68 ++++++++++++++++-----------
>> 1 files changed, 40 insertions(+), 28 deletions(-)
>>
>> _______________________________________________
>> Openembedded-core mailing list
>> Openembedded-core@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>>
>>
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core@lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
>
next prev parent reply other threads:[~2013-10-16 19:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-10 20:06 [PATCH 0/2] Use alternatives for all of binutils instead of -symlinks Peter Seebach
2013-10-10 20:06 ` [PATCH 1/2] Use alternatives for the binutils-symlinks package Peter Seebach
2013-10-10 20:06 ` [PATCH 2/2] Drop binutils-symlinks Peter Seebach
2013-10-16 16:48 ` [PATCH 0/2] Use alternatives for all of binutils instead of -symlinks Saul Wold
2013-10-16 19:18 ` Mark Hatle [this message]
2013-10-18 23:24 ` [PATCH 0/2] v2: Use alternatives for binutils Peter Seebach
2013-10-18 23:24 ` [PATCH 1/2] Use alternatives for the binutils-symlinks package Peter Seebach
2013-10-19 5:22 ` Saul Wold
2013-10-21 3:46 ` Peter Seebach
2013-11-04 18:40 ` Peter Seebach
2013-10-18 23:24 ` [PATCH 2/2] Drop binutils-symlinks Peter Seebach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=525EE67D.7040709@windriver.com \
--to=mark.hatle@windriver.com \
--cc=Peter.Seebach@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox