Re: DNS when using Static IP

[Mike Looijmans <mike.looijmans@topic.nl>]

When using DHCP, busybox's udhcpc script will write the DNS entries that 
the server returned into the resolv.conf file.

In this case, I think you'll have to "provide" resolv.conf in some other 
way, there's nothing in ifup/ifdown that will modify resolv.conf based 
on keywords in the interfaces file.

Mike.


On 05/02/2014 02:49 PM, Iorga, Cristian wrote:
> Not really, I just wanted to get a better overview of the issue that you
> are facing.
>
> What image did you started from, if any?
>
> *From:*Tarek El-Sherbiny [mailto:tarek.elsherbiny@gmail.com]
> *Sent:* Friday, May 2, 2014 3:31 PM
> *To:* Iorga, Cristian
> *Cc:* openembedded-core@lists.openembedded.org; yocto@yoctoproject.org
> *Subject:* RE: [OE-core] DNS when using Static IP
>
> No connman is not included.  Shall I include it and try?
>
> On 2 May 2014 13:01, "Iorga, Cristian" <cristian.iorga@intel.com
> <mailto:cristian.iorga@intel.com>> wrote:
>
>     Hello,
>
>     What image did you start from, if any?
>
>     i.e., core-image-minimal, core-image-sato, etc…
>
>     Is connman included?
>
>     Regards,
>
>     Cristian Iorga
>
>     YP
>
>     Intel Corporation
>
>     *From:*openembedded-core-bounces@lists.openembedded.org
>     <mailto:openembedded-core-bounces@lists.openembedded.org>
>     [mailto:openembedded-core-bounces@lists.openembedded.org
>     <mailto:openembedded-core-bounces@lists.openembedded.org>] *On
>     Behalf Of *Tarek El-Sherbiny
>     *Sent:* Friday, May 2, 2014 2:05 PM
>     *To:* yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>;
>     openembedded-core@lists.openembedded.org
>     <mailto:openembedded-core@lists.openembedded.org>
>     *Subject:* [OE-core] DNS when using Static IP
>
>     Hi.
>
>     I'm trying to set my IP config to a static address.
>
>     iface eth0 inet static
>
>           address 192.168.55.45
>
>           network 192.168.55.0
>
>           netmask 255.255.255.0
>
>           broadcast 192.168.55.255
>
>           gateway 192.168.55.1
>
>           dns-nameservers 192.168.10.2
>
>     But I don't get the DNS server address to be included in
>     /etc/resolv.conf
>
>     If I run in dchp mode, then the resolv.conf is updated with my DNS
>     address.
>
>     Is there something I'm missing here in my setup?
>
>     --
>
>     /Tarek/
>
>
>


-- 
Mike Looijmans