From: akuster <akuster@mvista.com>
To: Saul Wold <sgw@linux.intel.com>,
openembedded-core@lists.openembedded.org
Subject: Re: [meta-oe][PATCH] [v2] nettle: update to version 3.0
Date: Tue, 15 Jul 2014 08:35:42 -0700 [thread overview]
Message-ID: <53C54A4E.20008@mvista.com> (raw)
In-Reply-To: <53C5470B.2090704@linux.intel.com>
On 07/15/2014 08:21 AM, Saul Wold wrote:
> On 07/15/2014 08:13 AM, Armin Kuster wrote:
>> Updating to version 3.x
>> Version 3.x includes GPL v3 code. They call it dual
>> licensing
>> Keeping 2.7.1 as it is GPL v2
>> Put common code in inc file
>>
>> Signed-off-by: Armin Kuster <akuster@mvista.com>
>> ---
>> meta/recipes-support/nettle/nettle.inc | 27
>> +++++++++++++++++++++++++++
>> meta/recipes-support/nettle/nettle_2.7.1.bb | 20 +++-----------------
>> meta/recipes-support/nettle/nettle_3.0.bb | 16 ++++++++++++++++
>> 3 files changed, 46 insertions(+), 17 deletions(-)
>> create mode 100644 meta/recipes-support/nettle/nettle.inc
>> create mode 100644 meta/recipes-support/nettle/nettle_3.0.bb
>>
>> diff --git a/meta/recipes-support/nettle/nettle.inc
>> b/meta/recipes-support/nettle/nettle.inc
>> new file mode 100644
>> index 0000000..bca35c0
>> --- /dev/null
>> +++ b/meta/recipes-support/nettle/nettle.inc
>> @@ -0,0 +1,27 @@
>> +SUMMARY = "A low level cryptographic library"
>> +HOMEPAGE = "http://www.lysator.liu.se/~nisse/nettle/"
>> +SECTION = "libs"
>> +LICENSE = "LGPLv2.1 & GPLv2"
>> +
>> +# Version 2.7.1 is GPL v2
>> +# set PREFERRED_VERSION_nettle = "2.7.1" in local.conf
>> +# if you want GPLv2 code
>> +#
>
> The preferred mechanism for getting GPLv2 is to set
> INCOMPATIBLE_LICENSE="GPLv3", not by setting PREFERRED_VERSION, so I
> am not sure this comment is best here.
ok. will correct.
>
>> +# Version 3.x is GPL v2 and v3
>> +
>> +
>> +DEPENDS += "gmp"
>> +
>> +SRC_URI = "http://www.lysator.liu.se/~nisse/archive/${BP}.tar.gz"
>> +
>> +EXTRA_OECONF = "--disable-openssl"
>> +
>> +do_configure_prepend() {
>> + if [ ! -e ${S}/acinclude.m4 -a -e ${S}/aclocal.m4 ]; then
>> + cp ${S}/aclocal.m4 ${S}/acinclude.m4
>> + fi
>> +}
>> +
>> +inherit autotools
>> +
>> +BBCLASSEXTEND = "native"
>> diff --git a/meta/recipes-support/nettle/nettle_2.7.1.bb
>> b/meta/recipes-support/nettle/nettle_2.7.1.bb
>> index 8aa5351..9ef9f64 100644
>> --- a/meta/recipes-support/nettle/nettle_2.7.1.bb
>> +++ b/meta/recipes-support/nettle/nettle_2.7.1.bb
>> @@ -1,26 +1,12 @@
>> -SUMMARY = "A low level cryptographic library"
>> -HOMEPAGE = "http://www.lysator.liu.se/~nisse/nettle/"
>> -SECTION = "libs"
>> +
>> +include nettle.inc
>> +
>> LICENSE = "LGPLv2.1 & GPLv2"
>> LIC_FILES_CHKSUM =
>> "file://COPYING.LIB;md5=2d5025d4aa3495befef8f17206a5b0a1 \
>> file://serpent-decrypt.c;beginline=53;endline=67;md5=bcfd4745d53ca57f82907089898e390d
>> \
>> file://serpent-set-key.c;beginline=56;endline=70;md5=bcfd4745d53ca57f82907089898e390d"
>>
>> -DEPENDS += "gmp"
>> -
>> -SRC_URI = "http://www.lysator.liu.se/~nisse/archive/${BP}.tar.gz"
>>
>> SRC_URI[md5sum] = "003d5147911317931dd453520eb234a5"
>> SRC_URI[sha256sum] =
>> "bc71ebd43435537d767799e414fce88e521b7278d48c860651216e1fc6555b40"
>>
>> -EXTRA_OECONF = "--disable-openssl"
>> -
>> -do_configure_prepend() {
>> - if [ ! -e ${S}/acinclude.m4 -a -e ${S}/aclocal.m4 ]; then
>> - cp ${S}/aclocal.m4 ${S}/acinclude.m4
>> - fi
>> -}
>> -
>> -inherit autotools
>> -
>> -BBCLASSEXTEND = "native"
>> diff --git a/meta/recipes-support/nettle/nettle_3.0.bb
>> b/meta/recipes-support/nettle/nettle_3.0.bb
>> new file mode 100644
>> index 0000000..bac2e71
>> --- /dev/null
>> +++ b/meta/recipes-support/nettle/nettle_3.0.bb
>> @@ -0,0 +1,16 @@
>> +#
>> +# Nettle 3 and above contains GPL v3 code
>> +# use 2.7.1 if you do not want GPL v3 code
>> +#
>> +
>> +include nettle.inc
>> +
>> +LICENSE = "LGPLv2.1 & GPLv2 & GPLv3"
>> +
> This should be | (single) then based on your follow up email to RP.
will fix this too.
-Armin
>
> Sau!
>
>> +LIC_FILES_CHKSUM =
>> "file://COPYINGv3;md5=11cc2d3ee574f9d6b7ee797bdce4d423\
>> +
>> file://serpent-decrypt.c;beginline=53;endline=67;md5=a4ccbeb343203d3586661f45c1cab577
>> \
>> +
>> file://serpent-set-key.c;beginline=56;endline=70;md5=150b0ea44cdfb712a83331bff566e9a8"
>> +
>> +SRC_URI[md5sum] = "f64b1bf1e774b7ae6e507318e340250e"
>> +SRC_URI[sha256sum] =
>> "9651c0bd2326eb737d0ed9eb403444712407c01a25b0fe813432ef31bebcd913"
>> +
>>
next prev parent reply other threads:[~2014-07-15 15:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-15 15:13 [meta-oe][PATCH] [v2] nettle: update to version 3.0 Armin Kuster
2014-07-15 15:21 ` Saul Wold
2014-07-15 15:35 ` akuster [this message]
2014-07-15 15:24 ` Burton, Ross
2014-07-15 15:34 ` akuster
2014-07-16 17:18 ` Saul Wold
2014-07-16 21:23 ` Burton, Ross
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53C54A4E.20008@mvista.com \
--to=akuster@mvista.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=sgw@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox