Re: [PATCH 0/5] linux-yocto: consolidated pull request

[Bruce Ashfield <bruce.ashfield@windriver.com>]

On 2015-05-03 05:30 PM, Richard Purdie wrote:
> On Thu, 2015-04-30 at 21:34 -0400, Bruce Ashfield wrote:
>> Here is the latest consolidated pull request for the supported linux-yocto
>> kernels.
>>
>>   - We have a refresh of the 3.14-rt support
>>   - bluetooh configuration changes for common-pc/qemux86
>>   - braswell BSP features and fixes
>>   - Introduction of the 4.1-rc1 -dev kernel (and associated perf fix).
>>
>> I've built and booted these on my local machines and qemu, and
>> everything was sane.
>>
>> The -dev kernel obviously isn't something for deployment yet, but
>> it builds, and forms the base for follow up config changes, features
>> and development work. I built and booted core-image-kernel dev with
>> the 4.1 changes in place.
>
> There was also a problem with poky-lsb. The idea (as far as I remember)
> is that it should be using LTSI rather than the default main kernel so
> we could split the testing. Unfortunately it was pointing at 3.10 which
> doesn't exist any longer so was using 3.17. I think LTSI is 3.14 so I
> updated the PREFERRED_VERSION to that.
>
> This resulted in this failure on the autobuilder:
>
> https://autobuilder.yoctoproject.org/main/builders/nightly-mips-lsb/builds/281/steps/BuildImages/logs/stdio
>
> Basically with qemumips and 3.14. Hopefully not a hard one to fix. If
> I've mixed the versions up, let me know which one poky-lsb should be

FYI: I've fixed the mips build. Looking at x86 now. SRCREV updates
to follow ASAP.

Bruce

> using.
>
> Cheers,
>
> Richard
>