On 05/04/2015 02:19 PM, Denys Dmytriyenko wrote:
> On Mon, May 04, 2015 at 02:50:17PM -0400, Denys Dmytriyenko wrote:
>> On Fri, May 01, 2015 at 05:13:05PM -0500, Alejandro del Castillo wrote:
>>>
>>> On 05/01/2015 11:06 AM, Denys Dmytriyenko wrote:
>>>> Hi,
>>>>
>>>> Has anyone ever seen this message during <image>.do_rootfs task?
>>>>
>>>> Collected errors:
>>>>  * opkg_install_pkg: Package <package> md5sum mismatch. Either the opkg or the package index are corrupt. Try 'opkg update'.
>>>>  * opkg_install_cmd: Cannot install package <package>.
>>>>
>>>> We started seeing it on random packages inside the <image> few weeks ago on 
>>>> different machines. At the time we had switched to bitbake 1.26. But even 
>>>> trying different bitbake versions still occasionally caused the same error, so 
>>>> the culprit is still unknwon. Using oe-core/daisy for now.
>>>>
>>>> Any comments or suggestions to where start looking would be appreciated! 
>>>> Thanks.
>>> The error is saying that there is a mismatch between the registered package 
>>> mds5sum and the actual md5sum of the package. On your log.do_rootfs log file 
>>> you should find the opkg-cl command being called, which has an opkg.conf 
>>> file as parameter. Inside the conf file, you will see the paths to the local 
>>> repos being used to build your image.  Can you confirm that the registered 
>>> md5sum for one of the problematic packages on the Package file on the repo 
>>> doesn't match the actual package md5sum?
>> Yes, md5sum of the package doesn't match the one recorded in the Packages file 
>> of the local feed.
>>
>> BTW, this seems to only happen to arch-less packages from the "all" feed, 
>> mainly packagegroups...
> And then I realized that the failing packagegroup shouldn't really be 
> arch-less! Apparently, I misplaced PACKAGE_ARCH = "${MACHINE_ARCH}" before 
> inheriting packagegroup class. Oops!
>
For Dizzy and Fido, I think the order changed (you need to place PACKAGE_ARCH
before inherit packagegroup). The good news is that if you upgrade, there is a
check that breaks the build if the bad ordering is detected (
30aaada4b79fc1acad5fdaba98071b63c52b9e05).