From: Rongqing Li <rongqing.li@windriver.com>
To: Robert Yang <liezhi.yang@windriver.com>,
<openembedded-core@lists.openembedded.org>
Subject: Re: [BUG REPORT] failed to build valgrind on qemuarm
Date: Tue, 19 Jan 2016 15:50:24 +0800 [thread overview]
Message-ID: <569DEAC0.9080204@windriver.com> (raw)
In-Reply-To: <569DEA11.30107@windriver.com>
On 2016年01月19日 15:47, Robert Yang wrote:
>
> On 01/19/2016 03:27 PM, Rongqing Li wrote:
>> 1. on qemuarm:
>
> There is a patch for this:
> [OE-core] [PATCH] valgrind: make it explicit that valgrind supports
> armv7a and above
>
> // Robert
which armv7 BSP is tested?
thanks
-Roy
>
>>
>> | arm-poky-linux-gnueabi-gcc -march=armv5e -marm
>> --sysroot=/buildarea1/lirq/Yocto/poky/arm/tmp/sysroots/qemuarm
>> -DHAVE_CONFIG_H
>> -I. -I../../valgrind-3.11.0/memcheck -I.. -I../../valgrind-3.11.0
>> -I../../valgrind-3.11.0/include -I../../valgrind-3.11.0/VEX/pub
>> -I../VEX/pub
>> -DVGA_arm=1 -DVGO_linux=1 -DVGP_arm_linux=1
>> -DVGPV_arm_linux_vanilla=1 -O2 -g
>> -std=gnu99 -Wall -Wmissing-prototypes -Wshadow -Wpointer-arith
>> -Wstrict-prototypes -Wmissing-declarations -Wcast-qual -Wwrite-strings
>> -Wempty-body -Wformat -Wformat-security -Wignored-qualifiers
>> -Wmissing-parameter-type -Wold-style-declaration -fno-stack-protector
>> -fno-strict-aliasing -fno-builtin -marm -mcpu=cortex-a8 -O -g
>> -fno-omit-frame-pointer -fno-strict-aliasing -fpic -fno-builtin
>> -fno-ipa-icf -O2
>> -O2 -pipe -g -feliminate-unused-debug-types -c -o
>> vgpreload_memcheck_arm_linux_so-mc_replace_strmem.o `test -f
>> 'mc_replace_strmem.c' || echo
>> '../../valgrind-3.11.0/memcheck/'`mc_replace_strmem.c
>> | for f in ; do \
>> | if [ ! -e $f.dSYM -o $f -nt $f.dSYM ] ; then \
>> | echo "dsymutil $f"; \
>> | dsymutil $f; \
>> | fi; \
>> | done
>> | ../../valgrind-3.11.0/memcheck/mc_malloc_wrappers.c:1:0: warning:
>> switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | mkdir -p ../.in_place; \
>> | for f in ; do \
>> | rm -f ../.in_place/$f.dSYM; \
>> | ln -f -s ../memcheck/$f.dSYM ../.in_place; \
>> | done
>> | ../../valgrind-3.11.0/memcheck/mc_leakcheck.c:1:0: warning: switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | ../../valgrind-3.11.0/memcheck/mc_replace_strmem.c:1:0: warning: switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | ../../valgrind-3.11.0/memcheck/mc_errors.c:1:0: warning: switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | ../../valgrind-3.11.0/memcheck/mc_translate.c:1:0: warning: switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | ../../valgrind-3.11.0/memcheck/mc_machine.c:1:0: warning: switch
>> -mcpu=cortex-a8 conflicts with -march=armv5e switch
>> |
>> | ^
>> | ../../valgrind-3.11.0/memcheck/mc_main.c:1:0: warning: switch
>> -mcpu=cortex-a8
>> conflicts with -march=armv5e switch
>> | /* -*- mode: C; c-basic-offset: 3; -*- */
>> | ^
>> | {standard input}: Assembler messages:
>> | {standard input}:25: Error: selected processor does not support ARM
>> mode `movw
>> r3,#:lower16:primary_map'
>> | {standard input}:28: Error: selected processor does not support ARM
>> mode `movt
>> r3,#:upper16:primary_map'
>> | {standard input}:30: Error: selected processor does not support ARM
>> mode `uxth
>> r1,r0'
>> | {standard input}:31: Error: selected processor does not support ARM
>> mode `movw
>> r3,#0xAAAA'
>> | {standard input}:40: Error: selected processor does not support ARM
>> mode `movw
>> r3,#0x5555'
>> | {standard input}:61: Error: selected processor does not support ARM
>> mode `movw
>> r3,#:lower16:primary_map'
>> | {standard input}:64: Error: selected processor does not support ARM
>> mode `movt
>> r3,#:upper16:primary_map'
>> | {standard input}:66: Error: selected processor does not support ARM
>> mode `uxth
>> r1,r0'
>> | {standard input}:94: Error: selected processor does not support ARM
>> mode `movw
>> r3,#:lower16:primary_map'
>> | {standard input}:95: Error: selected processor does not support ARM
>> mode `uxth
>> r1,r0'
>> | {standard input}:96: Error: selected processor does not support ARM
>> mode `movt
>> r3,#:upper16:primary_map'
>> | {standard input}:135: Error: selected processor does not support ARM
>> mode
>> `movw r3,#:lower16:primary_map'
>> | {standard input}:136: Error: selected processor does not support ARM
>> mode
>> `uxth r1,r0'
>> | {standard input}:137: Error: selected processor does not support ARM
>> mode
>> `movt r3,#:upper16:primary_map'
>>
>>
>>
>> 2: on qemuarma9
>>
>>
>> | arm-wrs-linux-gnueabi-gcc -march=armv7-a -mfloat-abi=softfp -marm
>> -mthumb-interwork
>> --sysroot=/work/wr/buildarea/arm/bitbake_build/tmp/sysroots/qemuarma9
>> -DHAVE_CONFIG_H -I.
>> -I/work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0/memcheck/tests
>>
>> -I../..
>> -I/work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0
>>
>> -I/work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0/include
>>
>> -I/work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0/coregrind
>>
>> -I../../include
>> -I/work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0/VEX/pub
>>
>> -I../../VEX/pub -DVGA_arm=1 -DVGO_linux=1 -DVGP_arm_linux=1
>> -DVGPV_arm_linux_vanilla=1 -Winline -Wall -Wshadow -Wno-long-long -g
>> -fno-stack-protector -O2 -pipe -g -fno-omit-frame-pointer
>> -fvisibility=default -O0 -c -o sh-mem-random.o
>> /work/wr/buildarea/arm/bitbake_build/tmp/work/armv7a-vfp-wrs-linux-gnueabi/valgrind/3.11.0-r0/valgrind-3.11.0/memcheck/tests/sh-mem-random.c
>>
>>
>> | {standard input}: Assembler messages:
>> | {standard input}:1107: Error: selected processor does not support
>> ARM mode
>> `vld1.64 {d7},[r3]'
>> | {standard input}:1107: Error: selected processor does not support
>> ARM mode
>> `vst1.64 {d7},[r2]'
>> | Makefile:2467: recipe for target 'sh-mem-random.o' failed
>>
>>
>> and the codes are below:
>>
>> 194 #elif defined(__linux__) && defined(__arm__) && !defined(__aarch64__)
>> 195 /* On arm32, many compilers generate a 64-bit float move
>> 196 using two 32 bit integer registers, which completely
>> 197 defeats this test. Hence force a 64-bit NEON load and
>> 198 store. I guess this will break the build on non-NEON
>> 199 capable targets. */
>> 200 __asm__ __volatile__ (
>> 201 "vld1.64 {d7},[%0] ; vst1.64 {d7},[%1] "
>> 202 : : "r"(arr+src), "r"(arr+dst) : "d7","memory"
>> 203 );
>> 204 #else
>>
>>
>> -Roy
>
--
Best Reagrds,
Roy | RongQing Li
next prev parent reply other threads:[~2016-01-19 7:50 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-19 7:27 [BUG REPORT] failed to build valgrind on qemuarm Rongqing Li
2016-01-19 7:47 ` Robert Yang
2016-01-19 7:50 ` Rongqing Li [this message]
2016-01-19 8:05 ` Robert Yang
2016-01-19 20:20 ` Andre McCurdy
2016-01-20 1:17 ` Rongqing Li
2016-01-19 21:00 ` Khem Raj
2016-01-19 21:38 ` Andre McCurdy
2016-01-19 23:23 ` Khem Raj
2016-01-20 1:45 ` Andre McCurdy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=569DEAC0.9080204@windriver.com \
--to=rongqing.li@windriver.com \
--cc=liezhi.yang@windriver.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox