Re: [OE-Core][master][kirkstone][PATCH] rng-tools: backport patch to adjust jitterentropy library to timeout/fail on long delay

[xiangyu.chen@eng.windriver.com]

On 11/15/22 16:18, Xiangyu Chen wrote:
> Backport patch from upstream[1] to adjust jitter to timeout on init after 5 seconds in the event it takes
> to long to gether jitter entropy.This also fix rng-tools take full cpu usage with whole cores on ARM platforms.
>
> [1] https://github.com/nhorman/rng-tools/pull/171/commits/c29424f10a0dcbd18ac25607fa1c81c18a960e81
>
> Signed-off-by: Xiangyu Chen <xiangyu.chen@eng.windriver.com>

Friendly ping, thanks ;p


Br,

Xiangyu


> ---
>   ...ropy-library-to-timeout-fail-on-long.patch | 144 ++++++++++++++++++
>   .../rng-tools/rng-tools_6.15.bb               |   1 +
>   2 files changed, 145 insertions(+)
>   create mode 100644 meta/recipes-support/rng-tools/rng-tools/0001-Adjust-jitterentropy-library-to-timeout-fail-on-long.patch
>
> diff --git a/meta/recipes-support/rng-tools/rng-tools/0001-Adjust-jitterentropy-library-to-timeout-fail-on-long.patch b/meta/recipes-support/rng-tools/rng-tools/0001-Adjust-jitterentropy-library-to-timeout-fail-on-long.patch
> new file mode 100644
> index 0000000000..d70c6587aa
> --- /dev/null
> +++ b/meta/recipes-support/rng-tools/rng-tools/0001-Adjust-jitterentropy-library-to-timeout-fail-on-long.patch
> @@ -0,0 +1,144 @@
> +From 3f1d6e53985e40cbe4c7380ce503ca2778d4cd9d Mon Sep 17 00:00:00 2001
> +From: Neil Horman <nhorman@tuxdriver.com>
> +Date: Mon, 16 May 2022 13:38:54 -0400
> +Subject: [PATCH] Adjust jitterentropy library to timeout/fail on long delay
> +
> +When running rngd -l its possible, on platforms that have low jitter
> +entropy to block for long periods of time.  Adjust jitter to timeout on
> +init after 5 seconds in the event it takes to long to gether jitter
> +entropy
> +
> +Also while we're at it, I might have a build solution for the presence
> +of internal timers.  When jitterentropy is built without internal
> +timers, jent_notime_init is defined publically, but when it is built
> +with timers, its declared as a static symbol, preenting resolution, so
> +we can test to see if the function exists.  If it does we _don't_ have
> +notime support. The logic is a bit backwards, but i think it works
> +
> +Upstream-Status: Backport from
> +[https://github.com/nhorman/rng-tools/pull/171/commits/c29424f10a0dcbd18ac25607fa1c81c18a960e81]
> +
> +Signed-off-by: Xiangyu Chen <xiangyu.chen@eng.windriver.com>
> +---
> + configure.ac  |  6 ++---
> + rngd_jitter.c | 61 +++++++++++++++++++++++++++++++++++++++------------
> + 2 files changed, 50 insertions(+), 17 deletions(-)
> +
> +diff --git a/configure.ac b/configure.ac
> +index 40008ca..2e12308 100644
> +--- a/configure.ac
> ++++ b/configure.ac
> +@@ -94,9 +94,9 @@ AS_IF(
> + 		AC_SEARCH_LIBS(jent_version,jitterentropy,
> + 				[AM_CONDITIONAL([JITTER], [true])
> + 				AC_DEFINE([HAVE_JITTER],1,[Enable JITTER])
> +-				AC_CHECK_LIB(jitterentropy, jent_entropy_switch_notime_impl,
> +-				[AC_DEFINE([HAVE_JITTER_NOTIME],1,[Enable JITTER_NOTIME])],
> +-				[],-lpthread)],
> ++				AC_CHECK_LIB(jitterentropy, jent_notime_init,
> ++				[],
> ++				[AC_DEFINE([HAVE_JITTER_NOTIME],1, [Enable JITTER_NOTIME])],-lpthread)],
> + 				AC_MSG_NOTICE([No Jitterentropy library found]),-lpthread)
> + 	], [AC_MSG_NOTICE([Disabling JITTER entropy source])]
> + )
> +diff --git a/rngd_jitter.c b/rngd_jitter.c
> +index d1b17ba..3647b7f 100644
> +--- a/rngd_jitter.c
> ++++ b/rngd_jitter.c
> +@@ -400,6 +400,8 @@ int init_jitter_entropy_source(struct rng *ent_src)
> + 	int entflags = 0;
> + 	int ret;
> + 	int core_id = 0;
> ++	struct timespec base, now;
> ++	int rc;
> +
> + 	signal(SIGUSR1, jitter_thread_exit_signal);
> +
> +@@ -508,6 +510,10 @@ int init_jitter_entropy_source(struct rng *ent_src)
> + 	CPU_FREE(cpus);
> + 	cpus = NULL;
> +
> ++	flags = fcntl(pipefds[0], F_GETFL, 0);
> ++	flags |= O_NONBLOCK;
> ++	fcntl(pipefds[0], F_SETFL, flags);
> ++
> + 	if (ent_src->rng_options[JITTER_OPT_USE_AES].int_val) {
> + 		/*
> + 		 * Temporarily disable aes so we don't try to use it during init
> +@@ -516,32 +522,59 @@ int init_jitter_entropy_source(struct rng *ent_src)
> + 		message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Initializing AES buffer\n");
> + 		aes_buf = malloc(tdata[0].buf_sz);
> + 		ent_src->rng_options[JITTER_OPT_USE_AES].int_val = 0;
> +-		if (xread_jitter(key, AES_BLOCK, ent_src)) {
> +-			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to obtain AES key, disabling AES in JITTER source\n");
> +-		} else if (xread_jitter(iv_buf, CHUNK_SIZE, ent_src)) {
> +-			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to obtain iv_buffer, disabling AES in JITTER source\n");
> ++		clock_gettime(CLOCK_REALTIME, &base);
> ++		do {
> ++			rc = xread_jitter(key, AES_BLOCK, ent_src);
> ++			clock_gettime(CLOCK_REALTIME, &now);
> ++		} while (rc && ((now.tv_sec - base.tv_sec) < 5));
> ++
> ++		if (rc) {
> ++			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to obtain AES key, disabling JITTER source\n");
> ++			close_jitter_entropy_source(ent_src);
> ++			return 1;
> ++		}
> ++		do {
> ++			rc = xread_jitter(iv_buf, CHUNK_SIZE, ent_src);
> ++			clock_gettime(CLOCK_REALTIME, &now);
> ++		} while (rc && ((now.tv_sec - base.tv_sec) < 5));
> ++
> ++		if (rc) {
> ++			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to obtain iv_buffer, disabling JITTER source\n");
> ++			close_jitter_entropy_source(ent_src);
> ++			return 1;
> + 		} else {
> + 			/* re-enable AES */
> + 			ent_src->rng_options[JITTER_OPT_USE_AES].int_val = 1;
> + 			ossl_ctx = ossl_aes_init(key, iv_buf);
> + 		}
> +-		xread_jitter(aes_buf, tdata[0].buf_sz, ent_src);
> ++
> ++		do {
> ++			rc = xread_jitter(aes_buf, tdata[0].buf_sz, ent_src);
> ++			clock_gettime(CLOCK_REALTIME, &now);
> ++		} while (rc && ((now.tv_sec - base.tv_sec) < 5));
> ++		if (rc) {
> ++			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to obtain aes buffer, disabling JITTER source\n");
> ++			close_jitter_entropy_source(ent_src);
> ++			return 1;
> ++		}
> ++
> + 	} else {
> + 		/*
> +-		 * Make sure that an entropy gathering thread has generated
> +-		 * at least some entropy before setting O_NONBLOCK and finishing
> +-		 * the entropy source initialization.
> +-		 *
> + 		 * This avoids "Entropy Generation is slow" log spamming that
> + 		 * would otherwise happen until jent_read_entropy() has run
> + 		 * for the first time.
> + 		 */
> +-		xread_jitter(&i, 1, ent_src);
> +-	}
> ++		do {
> ++			rc = xread_jitter(&i, 1, ent_src);
> ++			clock_gettime(CLOCK_REALTIME, &now);
> ++		} while (rc && ((now.tv_sec - base.tv_sec) < 5));
> ++		if (rc) {
> ++			message_entsrc(ent_src,LOG_CONS|LOG_INFO, "Unable to prime jitter source, disabling JITTER source\n");
> ++			close_jitter_entropy_source(ent_src);
> ++			return 1;
> ++		}
> +
> +-	flags = fcntl(pipefds[0], F_GETFL, 0);
> +-	flags |= O_NONBLOCK;
> +-	fcntl(pipefds[0], F_SETFL, flags);
> ++	}
> +
> + 	message_entsrc(ent_src,LOG_DAEMON|LOG_INFO, "Enabling JITTER rng support\n");
> + 	return 0;
> +--
> +2.34.1
> +
> diff --git a/meta/recipes-support/rng-tools/rng-tools_6.15.bb b/meta/recipes-support/rng-tools/rng-tools_6.15.bb
> index efc08b5e0a..c6284f0006 100644
> --- a/meta/recipes-support/rng-tools/rng-tools_6.15.bb
> +++ b/meta/recipes-support/rng-tools/rng-tools_6.15.bb
> @@ -12,6 +12,7 @@ SRC_URI = "git://github.com/nhorman/rng-tools.git;branch=master;protocol=https \
>              file://init \
>              file://default \
>              file://rng-tools.service \
> +           file://0001-Adjust-jitterentropy-library-to-timeout-fail-on-long.patch \
>              "
>   SRCREV = "381f69828b782afda574f259c1b7549f48f9bb77"
>   
>
> -=-=-=-=-=-=-=-=-=-=-=-
> Links: You receive all messages sent to this group.
> View/Reply Online (#173266): https://lists.openembedded.org/g/openembedded-core/message/173266
> Mute This Topic: https://lists.openembedded.org/mt/95039053/7175143
> Group Owner: openembedded-core+owner@lists.openembedded.org
> Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [xiangyu.chen@eng.windriver.com]
> -=-=-=-=-=-=-=-=-=-=-=-
>