RE: [OE-core] [PATCH] udev-extraconf/mount.sh: add LABELs to mountpoints

["Hamza, Muhammad" <Muhammad_Hamza@mentor.com>]

Hi Luca,
I have sent updated patch v2 at mailing list.

Regards,
Hamza

-----Original Message-----
From: Luca Ceresoli <luca.ceresoli@bootlin.com> 
Sent: Tuesday, June 21, 2022 1:21 PM
To: Hamza, Muhammad <Muhammad_Hamza@mentor.com>
Cc: openembedded-core@lists.openembedded.org; Awan, Arsalan <Arsalan_Awan@mentor.com>
Subject: Re: [OE-core] [PATCH] udev-extraconf/mount.sh: add LABELs to mountpoints

Hi Muhammad,

On Mon, 20 Jun 2022 17:26:40 +0500
"Muhammad Hamza" <Muhammad_Hamza@mentor.com> wrote:

> This alters the mountpoints such that if a device has a LABEL or a 
> PARTLABEL, it will be mounted at e.g.:
> 
>   /run/media/$LABEL-<device-node>
>   /run/media/$PARTLABEL-<device-node>
>   /run/media/rootfs-sda2
> 
> otherwise the device will be mounted at e.g.:
> 
>   /run/media/<device-node>
>   /run/media/sda1
> 
> The <device-node> appended with LABEL or PARTLABEL makes sure that the 
> mountpoint is unique, therefore, avoids overlapping mounts.
> 
> Signed-off-by: Arsalan H. Awan <Arsalan_Awan@mentor.com>
> Signed-off-by: Muhammad Hamza <muhammad_hamza@mentor.com>
> ---
>  .../recipes-core/udev/udev-extraconf/mount.sh | 20 
> +++++++++++++++++++  meta/recipes-core/udev/udev-extraconf_1.1.bb  |  
> 2 +-
>  2 files changed, 21 insertions(+), 1 deletion(-)
> 
> diff --git a/meta/recipes-core/udev/udev-extraconf/mount.sh 
> b/meta/recipes-core/udev/udev-extraconf/mount.sh
> index c8b773bc07..12c6a5af22 100644
> --- a/meta/recipes-core/udev/udev-extraconf/mount.sh
> +++ b/meta/recipes-core/udev/udev-extraconf/mount.sh
> @@ -54,6 +54,16 @@ automount_systemd() {
>          grep "^[[:space:]]*$tmp" /etc/fstab && return
>      done
>  
> +    # Get the LABEL or PARTLABEL
> +    LABEL=`/sbin/blkid | grep "${DEVNAME}:" | grep -o 'LABEL=".*"' | cut -d '"' -f2`
> +    # If the $DEVNAME has a LABEL or a PARTLABEL
> +    if [ -n "$LABEL" ]; then
> +            # Set the mount location dir name to LABEL appended
> +            # with $name e.g. label-sda. That would avoid overlapping
> +            # mounts in case two devices have same LABEL
> +            name="${LABEL}-${name}"
> +    fi
> +
>      [ -d "$MOUNT_BASE/$name" ] || mkdir -p "$MOUNT_BASE/$name"
>  
>      MOUNT="$MOUNT -o silent"
> @@ -94,6 +104,16 @@ automount() {
>  	# configured in fstab
>  	grep -q "^$DEVNAME " /proc/mounts && return
>  
> +        # Get the LABEL or PARTLABEL
> +        LABEL=`/sbin/blkid | grep "${DEVNAME}:" | grep -o 'LABEL=".*"' | cut -d '"' -f2`
> +        # If the $DEVNAME has a LABEL or a PARTLABEL
> +        if [ -n "$LABEL" ]; then
> +                # Set the mount location dir name to LABEL appended
> +                # with $name e.g. label-sda. That would avoid overlapping
> +                # mounts in case two devices have same LABEL
> +                name="${LABEL}-${name}"
> +        fi

This is exactly as above. Can you move the common code to a function?


--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com