From: "Mathieu Dubois-Briand" <mathieu.dubois-briand@bootlin.com>
To: "Vincent Davis Jr" <vince@underview.tech>,
<openembedded-core@lists.openembedded.org>
Subject: Re: [OE-core] [PATCH v3 1/8] bootimg_pcbios: support grub hybrid boot
Date: Mon, 15 Sep 2025 14:17:47 +0200 [thread overview]
Message-ID: <DCTD8YUISJCJ.HDLYXV3NZNH9@bootlin.com> (raw)
In-Reply-To: <17219.1757737790724979122@lists.openembedded.org>
[-- Attachment #1.1: Type: text/plain, Size: 1046 bytes --]
On Sat Sep 13, 2025 at 6:29 AM CEST, Vincent Davis Jr wrote:
> This issue has been hard to reproduce.
>
> Even when I manually build the same SEABIOS version.
>
> Everything boots for me when manually trying with bellow command
>
> qemu-system-x86_64 \
> -bios seabios/out/bios.bin \
> -nographic \
> -chardev stdio,id=char0,mux=on,signal=off \
> -mon chardev=char0,mode=readline \
> -serial chardev:char0 \
> -drive file=vm-storage/emmc-wic-udoo-bolt-emmc.rootfs.wic,format=raw,if=virtio
>
> Is there anyway with v3 to soley run
>
> oe-selftest --verbose -r wic.Wic2.test_grub_install_biosplusefi_qemu.
>
> And paste output?
Hi Vincent,
I ran the selftest manually and captured the output in attached log. I'm
also attaching the qemu_boot_log.20250915113946 file, but it's pretty
short.
I tried to capture most of the build-renamed-st directory, please tell
me if there is any file you need.
Thanks,
Mathieu
--
Mathieu Dubois-Briand, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: log --]
[-- Type: text/plain, Size: 36004 bytes --]
2025-09-15 11:37:56,511 - oe-selftest - INFO - Adding layer libraries:
2025-09-15 11:37:56,511 - oe-selftest - INFO - /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta-poky/lib
2025-09-15 11:37:56,511 - oe-selftest - INFO - /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib
2025-09-15 11:37:56,512 - oe-selftest - INFO - /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta-yocto-bsp/lib
2025-09-15 11:37:56,512 - oe-selftest - INFO - /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta-selftest/lib
2025-09-15 11:37:56,512 - oe-selftest - INFO - Checking base configuration is valid/parsable
NOTE: Reconnecting to bitbake server...
2025-09-15 11:37:56,887 - oe-selftest - INFO - Adding: "include selftest.inc" in /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/conf/local.conf
2025-09-15 11:37:56,888 - oe-selftest - INFO - Adding: "include bblayers.inc" in bblayers.conf
2025-09-15 11:37:56,888 - oe-selftest - INFO - test_grub_install_biosplusefi_qemu (wic.Wic2.test_grub_install_biosplusefi_qemu)
2025-09-15 11:38:50,817 - oe-selftest - DEBUG - Appending to: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/conf/selftest.inc
DEPENDS:pn-core-image-minimal += "grub-native grub grub-efi ovmf"
IMAGE_FSTYPES:pn-core-image-minimal += "wic"
IMAGE_CLASSES += "qemuboot"
WKS_FILE = "tmp0z_ad1mp.wks"
WKS_SEARCH_PATH = "/tmp"
2025-09-15 11:39:27,897 - oe-selftest - DEBUG - Removing from: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/conf/selftest.inc
DEPENDS:pn-core-image-minimal += "grub-native grub grub-efi ovmf"
IMAGE_FSTYPES:pn-core-image-minimal += "wic"
IMAGE_CLASSES += "qemuboot"
WKS_FILE = "tmp0z_ad1mp.wks"
WKS_SEARCH_PATH = "/tmp"
Loading cache...done.
2025-09-15 11:56:43,439 - oe-selftest - INFO - ... ERROR
Stdout:
rootfs file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic
Qemu log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
SSH log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/ssh_target_log.20250915113946
Using kvm for runqemu
QMP Available for connection at /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.6v6jj4sg
Created listening socket for qemu serial console on: 127.0.0.1:52143
Created listening socket for qemu serial console on: 127.0.0.1:54197
launchcmd=runqemu snapshot kvm nographic nographic qemux86-64 /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic tcpserial=52143:54197 bootparams=" printk.time=1" qemuparams="-pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait"
runqemu started, pid is 1526684
waiting at most 300 seconds for qemu pid (09/15/25 11:39:55)
QMP Initializing to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP Connecting to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP connected to QEMU at 09/15/25 11:39:56 and took 0.55 seconds
QMP released QEMU at 09/15/25 11:39:56 and took 0.10 seconds from connect
qemu started in 0.65 seconds - qemu procces pid is 1526688 (09/15/25 11:39:56)
Target IP: None
Server IP: None
Starting logging thread
Starting thread event loop
Connection request received
Setting connection established event
Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
MACHINE: [qemux86-64]
FSTYPE: [wic]
ROOTFS: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu skip tap0.
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
runqemu - INFO - Copy done in 0.08897805213928223 seconds
runqemu - INFO - Using scsi drive
runqemu - INFO - Running /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive if=none,id=hd,file=/home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685,format=raw -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd -usb -device usb-tablet -usb -device usb-kbd -cpu Skylake-Client -machine q35,i8042=off -smp 4 -enable-kvm -m 256 -serial tcp:127.0.0.1:52143,nodelay=on -serial tcp:127.0.0.1:54197,nodelay=on -pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait -nographic
runqemu - INFO - Host uptime: 589155.36
Waiting at most 1000 seconds for login banner (09/15/25 11:39:56)
Connection from 127.0.0.1:38154
Target didn't reach login banner in 1000 seconds (09/15/25 11:56:37)
Last 25 lines of login console (0):
Last 25 lines of all logging (308):
c[?7l[2J[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
Check full boot log: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
Stopping logging thread
Stop event received
Tearing down logging thread
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Extra log data read:
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
2025-09-15 11:56:43,470 - oe-selftest - INFO - Traceback (most recent call last):
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/utils/commands.py", line 390, in runqemu
qemu.start(params=qemuparams, ssh=ssh, runqemuparams=runqemuparams, launch_cmd=launch_cmd, discard_writes=discard_writes)
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/targetcontrol.py", line 179, in start
raise RuntimeError("%s - FAILED to start qemu - check the task log and the boot log" % self.pn)
RuntimeError: core-image-minimal - FAILED to start qemu - check the task log and the boot log
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f
return func(*args, **kwargs)
^^^^^^^^^^^^^^^^^^^^^
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/selftest/cases/wic.py", line 1599, in test_grub_install_biosplusefi_qemu
with runqemu(img, ssh=False, runqemuparams='%s nographic' % (runqemu_params),
File "/usr/lib/python3.11/contextlib.py", line 137, in __enter__
return next(self.gen)
^^^^^^^^^^^^^^
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/utils/commands.py", line 396, in runqemu
raise Exception(msg)
Exception: core-image-minimal - FAILED to start qemu - check the task log and the boot log
Failed to start QEMU - see the logs in /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimageQemurunner log output from /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemurunner_log.20250915113946:
INFO: rootfs file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic
INFO: Qemu log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
INFO: SSH log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/ssh_target_log.20250915113946
DEBUG: Using kvm for runqemu
INFO: QMP Available for connection at /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.6v6jj4sg
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:52143
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:54197
DEBUG: launchcmd=runqemu snapshot kvm nographic nographic qemux86-64 /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic tcpserial=52143:54197 bootparams=" printk.time=1" qemuparams="-pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait"
DEBUG: runqemu started, pid is 1526684
DEBUG: waiting at most 300 seconds for qemu pid (09/15/25 11:39:55)
DEBUG: QMP Initializing to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
DEBUG: QMP Connecting to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
INFO: QMP connected to QEMU at 09/15/25 11:39:56 and took 0.55 seconds
INFO: QMP released QEMU at 09/15/25 11:39:56 and took 0.10 seconds from connect
DEBUG: qemu started in 0.65 seconds - qemu procces pid is 1526688 (09/15/25 11:39:56)
DEBUG: Target IP: None
DEBUG: Server IP: None
DEBUG: Starting logging thread
DEBUG: Starting thread event loop
DEBUG: Connection request received
DEBUG: Setting connection established event
DEBUG: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
MACHINE: [qemux86-64]
FSTYPE: [wic]
ROOTFS: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu skip tap0.
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
runqemu - INFO - Copy done in 0.08897805213928223 seconds
runqemu - INFO - Using scsi drive
runqemu - INFO - Running /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive if=none,id=hd,file=/home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685,format=raw -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd -usb -device usb-tablet -usb -device usb-kbd -cpu Skylake-Client -machine q35,i8042=off -smp 4 -enable-kvm -m 256 -serial tcp:127.0.0.1:52143,nodelay=on -serial tcp:127.0.0.1:54197,nodelay=on -pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait -nographic
runqemu - INFO - Host uptime: 589155.36
DEBUG: Waiting at most 1000 seconds for login banner (09/15/25 11:39:56)
DEBUG: Connection from 127.0.0.1:38154
WARNING: Target didn't reach login banner in 1000 seconds (09/15/25 11:56:37)
WARNING: Last 25 lines of login console (0):
WARNING: Last 25 lines of all logging (308):
c[?7l[2J[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
WARNING: Check full boot log: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
DEBUG: Stopping logging thread
DEBUG: Stop event received
DEBUG: Tearing down logging thread
DEBUG: Sending SIGTERM to runqemu
INFO: Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
WARNING: Extra log data read:
DEBUG: Sending SIGTERM to runqemu
INFO: Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Stdout:
rootfs file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic
Qemu log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
SSH log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/ssh_target_log.20250915113946
Using kvm for runqemu
QMP Available for connection at /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.6v6jj4sg
Created listening socket for qemu serial console on: 127.0.0.1:52143
Created listening socket for qemu serial console on: 127.0.0.1:54197
launchcmd=runqemu snapshot kvm nographic nographic qemux86-64 /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic tcpserial=52143:54197 bootparams=" printk.time=1" qemuparams="-pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait"
runqemu started, pid is 1526684
waiting at most 300 seconds for qemu pid (09/15/25 11:39:55)
QMP Initializing to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP Connecting to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP connected to QEMU at 09/15/25 11:39:56 and took 0.55 seconds
QMP released QEMU at 09/15/25 11:39:56 and took 0.10 seconds from connect
qemu started in 0.65 seconds - qemu procces pid is 1526688 (09/15/25 11:39:56)
Target IP: None
Server IP: None
Starting logging thread
Starting thread event loop
Connection request received
Setting connection established event
Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
MACHINE: [qemux86-64]
FSTYPE: [wic]
ROOTFS: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu skip tap0.
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
runqemu - INFO - Copy done in 0.08897805213928223 seconds
runqemu - INFO - Using scsi drive
runqemu - INFO - Running /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive if=none,id=hd,file=/home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685,format=raw -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd -usb -device usb-tablet -usb -device usb-kbd -cpu Skylake-Client -machine q35,i8042=off -smp 4 -enable-kvm -m 256 -serial tcp:127.0.0.1:52143,nodelay=on -serial tcp:127.0.0.1:54197,nodelay=on -pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait -nographic
runqemu - INFO - Host uptime: 589155.36
Waiting at most 1000 seconds for login banner (09/15/25 11:39:56)
Connection from 127.0.0.1:38154
Target didn't reach login banner in 1000 seconds (09/15/25 11:56:37)
Last 25 lines of login console (0):
Last 25 lines of all logging (308):
c[?7l[2J[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
Check full boot log: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
Stopping logging thread
Stop event received
Tearing down logging thread
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Extra log data read:
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Stderr:
ERROR: Qemu log output from /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946:
^[c^[[?7l^[[2J^[[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
2025-09-15 11:56:43,470 - oe-selftest - INFO - ======================================================================
2025-09-15 11:56:43,470 - oe-selftest - INFO - ERROR: test_grub_install_biosplusefi_qemu (wic.Wic2.test_grub_install_biosplusefi_qemu)
2025-09-15 11:56:43,470 - oe-selftest - INFO - ----------------------------------------------------------------------
2025-09-15 11:56:43,470 - oe-selftest - INFO - Traceback (most recent call last):
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/utils/commands.py", line 390, in runqemu
qemu.start(params=qemuparams, ssh=ssh, runqemuparams=runqemuparams, launch_cmd=launch_cmd, discard_writes=discard_writes)
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/targetcontrol.py", line 179, in start
raise RuntimeError("%s - FAILED to start qemu - check the task log and the boot log" % self.pn)
RuntimeError: core-image-minimal - FAILED to start qemu - check the task log and the boot log
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/core/decorator/__init__.py", line 35, in wrapped_f
return func(*args, **kwargs)
^^^^^^^^^^^^^^^^^^^^^
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/selftest/cases/wic.py", line 1599, in test_grub_install_biosplusefi_qemu
with runqemu(img, ssh=False, runqemuparams='%s nographic' % (runqemu_params),
File "/usr/lib/python3.11/contextlib.py", line 137, in __enter__
return next(self.gen)
^^^^^^^^^^^^^^
File "/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/meta/lib/oeqa/utils/commands.py", line 396, in runqemu
raise Exception(msg)
Exception: core-image-minimal - FAILED to start qemu - check the task log and the boot log
Failed to start QEMU - see the logs in /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimageQemurunner log output from /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemurunner_log.20250915113946:
INFO: rootfs file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic
INFO: Qemu log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
INFO: SSH log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/ssh_target_log.20250915113946
DEBUG: Using kvm for runqemu
INFO: QMP Available for connection at /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.6v6jj4sg
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:52143
DEBUG: Created listening socket for qemu serial console on: 127.0.0.1:54197
DEBUG: launchcmd=runqemu snapshot kvm nographic nographic qemux86-64 /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic tcpserial=52143:54197 bootparams=" printk.time=1" qemuparams="-pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait"
DEBUG: runqemu started, pid is 1526684
DEBUG: waiting at most 300 seconds for qemu pid (09/15/25 11:39:55)
DEBUG: QMP Initializing to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
DEBUG: QMP Connecting to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
INFO: QMP connected to QEMU at 09/15/25 11:39:56 and took 0.55 seconds
INFO: QMP released QEMU at 09/15/25 11:39:56 and took 0.10 seconds from connect
DEBUG: qemu started in 0.65 seconds - qemu procces pid is 1526688 (09/15/25 11:39:56)
DEBUG: Target IP: None
DEBUG: Server IP: None
DEBUG: Starting logging thread
DEBUG: Starting thread event loop
DEBUG: Connection request received
DEBUG: Setting connection established event
DEBUG: Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
MACHINE: [qemux86-64]
FSTYPE: [wic]
ROOTFS: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu skip tap0.
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
runqemu - INFO - Copy done in 0.08897805213928223 seconds
runqemu - INFO - Using scsi drive
runqemu - INFO - Running /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive if=none,id=hd,file=/home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685,format=raw -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd -usb -device usb-tablet -usb -device usb-kbd -cpu Skylake-Client -machine q35,i8042=off -smp 4 -enable-kvm -m 256 -serial tcp:127.0.0.1:52143,nodelay=on -serial tcp:127.0.0.1:54197,nodelay=on -pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait -nographic
runqemu - INFO - Host uptime: 589155.36
DEBUG: Waiting at most 1000 seconds for login banner (09/15/25 11:39:56)
DEBUG: Connection from 127.0.0.1:38154
WARNING: Target didn't reach login banner in 1000 seconds (09/15/25 11:56:37)
WARNING: Last 25 lines of login console (0):
WARNING: Last 25 lines of all logging (308):
c[?7l[2J[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
WARNING: Check full boot log: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
DEBUG: Stopping logging thread
DEBUG: Stop event received
DEBUG: Tearing down logging thread
DEBUG: Sending SIGTERM to runqemu
INFO: Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
WARNING: Extra log data read:
DEBUG: Sending SIGTERM to runqemu
INFO: Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Stdout:
rootfs file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic
Qemu log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
SSH log file: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/ssh_target_log.20250915113946
Using kvm for runqemu
QMP Available for connection at /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.6v6jj4sg
Created listening socket for qemu serial console on: 127.0.0.1:52143
Created listening socket for qemu serial console on: 127.0.0.1:54197
launchcmd=runqemu snapshot kvm nographic nographic qemux86-64 /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic tcpserial=52143:54197 bootparams=" printk.time=1" qemuparams="-pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait"
runqemu started, pid is 1526684
waiting at most 300 seconds for qemu pid (09/15/25 11:39:55)
QMP Initializing to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP Connecting to /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/.fhz3nypf
QMP connected to QEMU at 09/15/25 11:39:56 and took 0.55 seconds
QMP released QEMU at 09/15/25 11:39:56 and took 0.10 seconds from connect
qemu started in 0.65 seconds - qemu procces pid is 1526688 (09/15/25 11:39:56)
Target IP: None
Server IP: None
Starting logging thread
Starting thread event loop
Connection request received
Setting connection established event
Output from runqemu:
runqemu - INFO - Continuing with the following parameters:
MACHINE: [qemux86-64]
FSTYPE: [wic]
ROOTFS: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.wic]
SNAPSHOT: [Enabled. Changes on rootfs won't be kept after QEMU shutdown.]
CONFFILE: [/srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/deploy/images/qemux86-64/core-image-minimal-qemux86-64.rootfs.qemuboot.conf]
runqemu - INFO - Using preconfigured tap device tap0
runqemu - INFO - If this is not intended, touch /tmp/qemu-tap-locks/tap0.skip to make runqemu skip tap0.
runqemu - INFO - Network configuration: ip=192.168.7.2::192.168.7.1:255.255.255.0::eth0:off:8.8.8.8 net.ifnames=0
runqemu - INFO - Copying rootfs to /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
runqemu - INFO - Copy done in 0.08897805213928223 seconds
runqemu - INFO - Using scsi drive
runqemu - INFO - Running /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/x86_64-linux/qemu-helper-native/1.0/recipe-sysroot-native/usr/bin/qemu-system-x86_64 -device virtio-net-pci,netdev=net0,mac=52:54:00:12:34:02 -netdev tap,id=net0,ifname=tap0,script=no,downscript=no -object rng-random,filename=/dev/urandom,id=rng0 -device virtio-rng-pci,rng=rng0 -drive if=none,id=hd,file=/home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685,format=raw -device virtio-scsi-pci,id=scsi -device scsi-hd,drive=hd -usb -device usb-tablet -usb -device usb-kbd -cpu Skylake-Client -machine q35,i8042=off -smp 4 -enable-kvm -m 256 -serial tcp:127.0.0.1:52143,nodelay=on -serial tcp:127.0.0.1:54197,nodelay=on -pidfile /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/pidfile_1478605 -S -qmp unix:./.fhz3nypf,server,wait -qmp unix:./.6v6jj4sg,server,nowait -nographic
runqemu - INFO - Host uptime: 589155.36
Waiting at most 1000 seconds for login banner (09/15/25 11:39:56)
Connection from 127.0.0.1:38154
Target didn't reach login banner in 1000 seconds (09/15/25 11:56:37)
Last 25 lines of login console (0):
Last 25 lines of all logging (308):
c[?7l[2J[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
Check full boot log: /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946
Stopping logging thread
Stop event received
Tearing down logging thread
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Extra log data read:
Sending SIGTERM to runqemu
Output from runqemu:
runqemu - INFO - Received signal: 15
runqemu - INFO - Cleaning up
runqemu - INFO - Host uptime: 590161.89
runqemu - INFO - Removing /home/pokybuild/tmp/core-image-minimal-qemux86-64.rootfs.wic.1526685
tput: unknown terminal "xterm-kitty"
Stderr:
ERROR: Qemu log output from /srv/pokybuild/yocto-worker/oe-selftest-debian-mathieu-2025-09-15/build/build-renamed-st/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/testimage/qemu_boot_log.20250915113946:
^[c^[[?7l^[[2J^[[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...
Booting from Hard Disk..
----------------------------------------------------------------------
2025-09-15 11:56:43,471 - oe-selftest - INFO - Ran 1 test in 1126.704s
2025-09-15 11:56:43,471 - oe-selftest - INFO - FAILED
2025-09-15 11:56:43,471 - oe-selftest - INFO - (errors=1)
2025-09-15 11:56:48,377 - oe-selftest - INFO - RESULTS:
2025-09-15 11:56:48,377 - oe-selftest - INFO - RESULTS - wic.Wic2.test_grub_install_biosplusefi_qemu: ERROR (1126.58s)
2025-09-15 11:56:48,385 - oe-selftest - INFO - SUMMARY:
2025-09-15 11:56:48,385 - oe-selftest - INFO - oe-selftest () - Ran 1 test in 1126.705s
2025-09-15 11:56:48,385 - oe-selftest - INFO - oe-selftest - FAIL - Required tests failed (successes=0, skipped=0, failures=0, errors=1)
[-- Attachment #3: qemu_boot_log.20250915113946 --]
[-- Type: text/plain, Size: 312 bytes --]
^[c^[[?7l^[[2J^[[0mSeaBIOS (version rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org)
iPXE (http://ipxe.org) 00:02.0 CA00 PCI2.10 PnP PMM+0EFC6560+0EF26560 CA00
Press Ctrl-B to configure iPXE (PCI 00:02.0)...\r
Booting from Hard Disk..
prev parent reply other threads:[~2025-09-15 12:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-09-05 16:41 [OE-core][PATCH v3 1/8] bootimg_pcbios: support grub hybrid boot Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 2/8] bootimg_efi: " Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 3/8] bootimg_efi: copy grub modules Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 4/8] bootimg_pcbios: update default boot timeout to zero Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 5/8] bootimg_biosplusefi: add grub only examples Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 6/8] grub-efi: support custom embedded grub configs Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 7/8] oe-selftest[wic]: add test_grub_install_biosplusefi Vincent Davis Jr
2025-09-05 16:41 ` [OE-core][PATCH v3 8/8] oe-selftest[wic]: add test_grub_install_biosplusefi_qemu Vincent Davis Jr
2025-09-07 14:02 ` [OE-core][PATCH v3 1/8] bootimg_pcbios: support grub hybrid boot Mathieu Dubois-Briand
2025-09-07 15:47 ` Vincent Davis
2025-09-08 12:25 ` Mathieu Dubois-Briand
2025-09-13 4:29 ` [PATCH " Vincent Davis Jr
2025-09-15 12:17 ` Mathieu Dubois-Briand [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=DCTD8YUISJCJ.HDLYXV3NZNH9@bootlin.com \
--to=mathieu.dubois-briand@bootlin.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=vince@underview.tech \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox