From: Mikko Rapeli <mikko.rapeli@linaro.org>
To: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Cc: openembedded-core@lists.openembedded.org
Subject: Re: [OE-core] [PATCH v5 1/4] wic bootimg-efi.py: fail build if no binaries installed
Date: Fri, 30 May 2025 11:30:06 +0300 [thread overview]
Message-ID: <aDlsjsXaEl2sXn5F@nuoska> (raw)
In-Reply-To: <DA8P2QRAA1SJ.3VHA71AFG09UZ@bootlin.com>
Hi,
On Thu, May 29, 2025 at 03:55:56PM +0200, Mathieu Dubois-Briand wrote:
> On Wed May 28, 2025 at 2:56 PM CEST, Mikko Rapeli via lists.openembedded.org wrote:
> > With systemd-boot, some builds included correct EFI
> > bootloader binaries and some not. Thus some builds
> > booted and some not. Check that some boot binary
> > was installed so that build fails if none were installed.
> >
> > Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org>
> > ---
>
> Hi Mikko,
>
> It looks like we have a new selftest error:
>
> 2025-05-29 06:41:09,920 - oe-selftest - INFO - overlayfs.OverlayFSEtcRunTimeTests.test_image_feature_is_missing (subunit.RemotedTestCase)
> 2025-05-29 06:41:09,921 - oe-selftest - INFO - ... FAIL
> ...
> ERROR: core-image-minimal-1.0-r0 do_image_wic: Execution of '/srv/pokybuild/yocto-worker/oe-selftest-debian/build/build-st-1199444/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/temp/run.do_image_wic.2027179' failed with exit code 1
> ...
> | ERROR: No EFI loaders installed to ESP partition. Check that grub-efi, systemd-boot or similar is installed.
>
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/35/builds/1649
> https://autobuilder.yoctoproject.org/valkyrie/#/builders/48/builds/1590
>
> Can you have a look please?
Thanks to verbose wic logs I can see from
https://autobuilder.yoctoproject.org/valkyrie/api/v2/logs/2526606/raw_inline
| DEBUG: _exec_cmd: install -d /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/EFI/BOOT
| DEBUG: ['install', '-d', '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/EFI/BOOT']
| DEBUG: _exec_cmd: output for install -d /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/EFI/BOOT (rc = 0):
| DEBUG: Ignoring missing initrd
| DEBUG: Writing grubefi config /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/EFI/BOOT/grub.cfg
| DEBUG: No boot files defined in IMAGE_EFI_BOOT_FILES
| DEBUG: _exec_cmd: install -d /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot
| DEBUG: ['install', '-d', '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot']
| DEBUG: _exec_cmd: output for install -d /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot (rc = 0):
| DEBUG: Writing syslinux config /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/syslinux.cfg
| DEBUG: SourcePlugin: do_stage_partition: part: <wic.partition.Partition object at 0x7f026ffef230>
| DEBUG: _exec_cmd: install -v -p -m 0644 /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/deploy/images/qemux86-64/bzImage /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/bzImage
| DEBUG: ['install', '-v', '-p', '-m', '0644', '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/deploy/images/qemux86-64/bzImage', '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/bzImage']
| DEBUG: _exec_cmd: output for install -v -p -m 0644 /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/deploy/images/qemux86-64/bzImage /srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/bzImage (rc = 0): '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/deploy/images/qemux86-64/bzImage' -> '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/bzImage'
| DEBUG: Installed kernel files:
| '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/deploy/images/qemux86-64/bzImage' -> '/srv/pokybuild/yocto-worker/oe-selftest-fedora/build/build-st-2677000/tmp/work/qemux86_64-poky-linux/core-image-minimal/1.0/tmp-wic/hdd/boot/bzImage'
| DEBUG: Installed systemd-boot files:
| []
| ERROR: No EFI loaders installed to ESP partition. Check that grub-efi, systemd-boot or similar is installed.
That the ESP partition did not install the EFI loader binary from grub-efi.
I think this is a bug in the build setup for the overayfs test since that
partition would not boot with EFI. I'll check how this can be fixed..
Cheers,
-Mikko
prev parent reply other threads:[~2025-05-30 8:30 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-28 12:56 [PATCH v5 1/4] wic bootimg-efi.py: fail build if no binaries installed Mikko Rapeli
2025-05-28 12:56 ` [PATCH v5 2/4] image_types_wic.bbclass: depend on grub-efi and systemd-boot on aarch64, systemd-boot on arm Mikko Rapeli
2025-05-28 12:56 ` [PATCH v5 3/4] image_types_wic.bbclass: remove os-release from WKS_FILE_DEPENDS_BOOTLOADERS on x86 and x86_64 Mikko Rapeli
2025-05-28 12:56 ` [PATCH v5 4/4] image_types_wic.bbclass: capture verbose wic output by default Mikko Rapeli
2025-05-29 13:55 ` [OE-core] [PATCH v5 1/4] wic bootimg-efi.py: fail build if no binaries installed Mathieu Dubois-Briand
2025-05-30 8:30 ` Mikko Rapeli [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aDlsjsXaEl2sXn5F@nuoska \
--to=mikko.rapeli@linaro.org \
--cc=mathieu.dubois-briand@bootlin.com \
--cc=openembedded-core@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox