From: "Martin Hundebøll" <martin@geanix.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: openembedded-core@lists.openembedded.org,
Alexander Kanavin <alex.kanavin@gmail.com>,
Khem Raj <raj.khem@gmail.com>,
Randy MacLeod <randy.macleod@windriver.com>,
Andreas Helbech Kleist <andreaskleist@gmail.com>
Subject: Re: [OE-core] [PATCH v2 3/5] ninja: build modified version with GNU Make jobserver support
Date: Fri, 02 Aug 2024 12:24:06 +0200 [thread overview]
Message-ID: <f47e5c53e97b190852dc5578e0c3f0fe140803da.camel@geanix.com> (raw)
In-Reply-To: <202404251130553913ebd5@mail.local>
Hi Alexandre,
I see you keep carrying these patches. I'm still working with ninja
upstream to add jobserver support there[1]. I was planning to redo
these patches once ninja merges that. But I can do a respin with my
patches added to ninja if you like?
[1] https://github.com/ninja-build/ninja/pull/2450
On Thu, 2024-04-25 at 13:30 +0200, Alexandre Belloni wrote:
> Hello,
>
> This patch doesn't apply on master anymore because ninja has been
> updated.
>
>
> On 04/04/2024 13:16:11+0200, Martin Hundeb?ll wrote:
> > Ninja doesn't (yet) support the GNU Make jobserver out of the box,
> > but
> > there is a pull request adding that support[1]. Since that pull
> > request
> > (and its derived three-part pull requests) seem to be ignored by
> > upstream, kitware (creator/maintainer of cmake) has created a
> > fork[2]
> > only to carry the jobserver patches. Change the source uri to point
> > at
> > the kitware fork of ninja, and add two patches from the original
> > pull
> > request to also support the new-style fifo jobserver feature.
> >
> > Note that the kitware fork of ninja is also used by buildroot[3].
> >
> > [1] https://github.com/ninja-build/ninja/pull/2263
> > [2] https://github.com/Kitware/ninja
> > [3]
> > https://gitlab.com/buildroot.org/buildroot/-/blob/master/package/ninja/ninja.mk
> >
> > Signed-off-by: Martin Hundebøll <martin@geanix.com>
> > ---
> > ...ename-TokenPool-Setup-to-SetupClient.patch | 113 ++++++++
> > ...-jobserver-fifo-style-client-support.patch | 271
> > ++++++++++++++++++
> > meta/recipes-devtools/ninja/ninja_1.11.1.bb | 8 +-
> > 3 files changed, 390 insertions(+), 2 deletions(-)
> > create mode 100644 meta/recipes-devtools/ninja/files/0001-Rename-
> > TokenPool-Setup-to-SetupClient.patch
> > create mode 100644 meta/recipes-devtools/ninja/files/0002-Add-GNU-
> > make-jobserver-fifo-style-client-support.patch
> >
> > diff --git a/meta/recipes-devtools/ninja/files/0001-Rename-
> > TokenPool-Setup-to-SetupClient.patch b/meta/recipes-
> > devtools/ninja/files/0001-Rename-TokenPool-Setup-to-
> > SetupClient.patch
> > new file mode 100644
> > index 0000000000..a503f8c75f
> > --- /dev/null
> > +++ b/meta/recipes-devtools/ninja/files/0001-Rename-TokenPool-
> > Setup-to-SetupClient.patch
> > @@ -0,0 +1,113 @@
> > +From f5642d8b49688dfc84679451b531d92f3b6e7cb0 Mon Sep 17 00:00:00
> > 2001
> > +From: Stefan Becker <chemobejk@gmail.com>
> > +Date: Sat, 15 Dec 2018 19:29:42 +0200
> > +Subject: [PATCH 1/2] Rename TokenPool::Setup() to SetupClient()
> > +MIME-Version: 1.0
> > +Content-Type: text/plain; charset=UTF-8
> > +Content-Transfer-Encoding: 8bit
> > +
> > +Make space to add new API to set up token pool master.
> > +
> > +Signed-off-by: Martin Hundebøll <martin@geanix.com>
> > +Upstream-Status: Submitted
> > [https://github.com/Kitware/ninja/pull/2]
> > +---
> > + src/build.cc | 6 +++---
> > + src/subprocess_test.cc | 3 ++-
> > + src/tokenpool-gnu-make.cc | 6 +++---
> > + src/tokenpool-gnu-make.h | 3 ++-
> > + src/tokenpool.h | 3 ++-
> > + src/tokenpool_test.cc | 2 +-
> > + 6 files changed, 13 insertions(+), 10 deletions(-)
> > +
> > +diff --git a/src/build.cc b/src/build.cc
> > +index 53e4405..d8a6dff 100644
> > +--- a/src/build.cc
> > ++++ b/src/build.cc
> > +@@ -474,9 +474,9 @@ struct RealCommandRunner : public
> > CommandRunner {
> > + RealCommandRunner::RealCommandRunner(const BuildConfig& config) :
> > config_(config) {
> > + max_load_average_ = config.max_load_average;
> > + if ((tokens_ = TokenPool::Get()) != NULL) {
> > +- if (!tokens_->Setup(config_.parallelism_from_cmdline,
> > +- config_.verbosity ==
> > BuildConfig::VERBOSE,
> > +- max_load_average_)) {
> > ++ if (!tokens_->SetupClient(config_.parallelism_from_cmdline,
> > ++ config_.verbosity ==
> > BuildConfig::VERBOSE,
> > ++ max_load_average_)) {
> > + delete tokens_;
> > + tokens_ = NULL;
> > + }
> > +diff --git a/src/subprocess_test.cc b/src/subprocess_test.cc
> > +index eddc110..222b59b 100644
> > +--- a/src/subprocess_test.cc
> > ++++ b/src/subprocess_test.cc
> > +@@ -40,7 +40,8 @@ struct TestTokenPool : public TokenPool {
> > + void Reserve() {}
> > + void Release() {}
> > + void Clear() {}
> > +- bool Setup(bool ignore_unused, bool verbose, double&
> > max_load_average) { return false; }
> > ++ bool SetupClient(bool ignore_unused, bool verbose,
> > ++ double& max_load_average) { return false; }
> > +
> > + #ifdef _WIN32
> > + bool _token_available;
> > +diff --git a/src/tokenpool-gnu-make.cc b/src/tokenpool-gnu-make.cc
> > +index 60e0552..6fb72a6 100644
> > +--- a/src/tokenpool-gnu-make.cc
> > ++++ b/src/tokenpool-gnu-make.cc
> > +@@ -28,9 +28,9 @@ GNUmakeTokenPool::GNUmakeTokenPool() :
> > available_(1), used_(0) {
> > + GNUmakeTokenPool::~GNUmakeTokenPool() {
> > + }
> > +
> > +-bool GNUmakeTokenPool::Setup(bool ignore,
> > +- bool verbose,
> > +- double& max_load_average) {
> > ++bool GNUmakeTokenPool::SetupClient(bool ignore,
> > ++ bool verbose,
> > ++ double& max_load_average) {
> > + const char* value = GetEnv("MAKEFLAGS");
> > + if (!value)
> > + return false;
> > +diff --git a/src/tokenpool-gnu-make.h b/src/tokenpool-gnu-make.h
> > +index c94cca5..f4ab8d7 100644
> > +--- a/src/tokenpool-gnu-make.h
> > ++++ b/src/tokenpool-gnu-make.h
> > +@@ -24,7 +24,8 @@ struct GNUmakeTokenPool : public TokenPool {
> > + virtual void Reserve();
> > + virtual void Release();
> > + virtual void Clear();
> > +- virtual bool Setup(bool ignore, bool verbose, double&
> > max_load_average);
> > ++ virtual bool SetupClient(bool ignore, bool verbose,
> > ++ double& max_load_average);
> > +
> > + // platform specific implementation
> > + virtual const char* GetEnv(const char* name) = 0;
> > +diff --git a/src/tokenpool.h b/src/tokenpool.h
> > +index 931c227..ce2bf48 100644
> > +--- a/src/tokenpool.h
> > ++++ b/src/tokenpool.h
> > +@@ -26,7 +26,8 @@ struct TokenPool {
> > + virtual void Clear() = 0;
> > +
> > + // returns false if token pool setup failed
> > +- virtual bool Setup(bool ignore, bool verbose, double&
> > max_load_average) = 0;
> > ++ virtual bool SetupClient(bool ignore, bool verbose,
> > ++ double& max_load_average) = 0;
> > +
> > + #ifdef _WIN32
> > + virtual void WaitForTokenAvailability(HANDLE ioport) = 0;
> > +diff --git a/src/tokenpool_test.cc b/src/tokenpool_test.cc
> > +index 1bc1c84..9d07146 100644
> > +--- a/src/tokenpool_test.cc
> > ++++ b/src/tokenpool_test.cc
> > +@@ -77,7 +77,7 @@ struct TokenPoolTest : public testing::Test {
> > + ENVIRONMENT_INIT(buf_);
> > + }
> > + if ((tokens_ = TokenPool::Get()) != NULL) {
> > +- if (!tokens_->Setup(ignore_jobserver, false, load_avg_)) {
> > ++ if (!tokens_->SetupClient(ignore_jobserver, false,
> > load_avg_)) {
> > + delete tokens_;
> > + tokens_ = NULL;
> > + }
> > +--
> > +2.44.0
> > +
> > diff --git a/meta/recipes-devtools/ninja/files/0002-Add-GNU-make-
> > jobserver-fifo-style-client-support.patch b/meta/recipes-
> > devtools/ninja/files/0002-Add-GNU-make-jobserver-fifo-style-client-
> > support.patch
> > new file mode 100644
> > index 0000000000..770a53fbc9
> > --- /dev/null
> > +++ b/meta/recipes-devtools/ninja/files/0002-Add-GNU-make-
> > jobserver-fifo-style-client-support.patch
> > @@ -0,0 +1,271 @@
> > +From 830b7fb396383171c5fac2aae7de880ac83ce955 Mon Sep 17 00:00:00
> > 2001
> > +From: Stefan Becker <chemobejk@gmail.com>
> > +Date: Mon, 7 Nov 2022 20:45:27 +0200
> > +Subject: [PATCH 2/2] Add GNU make jobserver fifo style client
> > support
> > +MIME-Version: 1.0
> > +Content-Type: text/plain; charset=UTF-8
> > +Content-Transfer-Encoding: 8bit
> > +
> > +GNU make 4.4 introduced a new jobserver style "fifo" for POSIX
> > systems
> > +which passes a named pipe down to the clients.
> > +
> > +- update auth parser to recognize "fifo:<name>" format
> > +- open named pipe for reading and writing
> > +- make sure the file descriptors are closed in the destructor
> > +- add 2 tests that aren't compiled for WIN32
> > +
> > +Signed-off-by: Martin Hundebøll <martin@geanix.com>
> > +Upstream-Status: Submitted
> > [https://github.com/Kitware/ninja/pull/2]
> > +---
> > + src/tokenpool-gnu-make-posix.cc | 46 ++++++++++++++++-
> > + src/tokenpool_test.cc | 88
> > ++++++++++++++++++++++++++++++---
> > + 2 files changed, 127 insertions(+), 7 deletions(-)
> > +
> > +diff --git a/src/tokenpool-gnu-make-posix.cc b/src/tokenpool-gnu-
> > make-posix.cc
> > +index 8447070..a82cce4 100644
> > +--- a/src/tokenpool-gnu-make-posix.cc
> > ++++ b/src/tokenpool-gnu-make-posix.cc
> > +@@ -40,6 +40,7 @@ struct GNUmakeTokenPoolPosix : public
> > GNUmakeTokenPool {
> > + private:
> > + int rfd_;
> > + int wfd_;
> > ++ bool closeFds_;
> > +
> > + struct sigaction old_act_;
> > + bool restore_;
> > +@@ -48,14 +49,19 @@ struct GNUmakeTokenPoolPosix : public
> > GNUmakeTokenPool {
> > + static void CloseDupRfd(int signum);
> > +
> > + bool CheckFd(int fd);
> > ++ bool CheckFifo(const char* fifo);
> > + bool SetAlarmHandler();
> > + };
> > +
> > +-GNUmakeTokenPoolPosix::GNUmakeTokenPoolPosix() : rfd_(-1), wfd_(-
> > 1), restore_(false) {
> > ++GNUmakeTokenPoolPosix::GNUmakeTokenPoolPosix() : rfd_(-1), wfd_(-
> > 1), closeFds_(false), restore_(false) {
> > + }
> > +
> > + GNUmakeTokenPoolPosix::~GNUmakeTokenPoolPosix() {
> > + Clear();
> > ++ if (closeFds_) {
> > ++ close(wfd_);
> > ++ close(rfd_);
> > ++ }
> > + if (restore_)
> > + sigaction(SIGALRM, &old_act_, NULL);
> > + }
> > +@@ -69,6 +75,36 @@ bool GNUmakeTokenPoolPosix::CheckFd(int fd) {
> > + return true;
> > + }
> > +
> > ++bool GNUmakeTokenPoolPosix::CheckFifo(const char* fifo) {
> > ++ // remove possible junk from end of fifo name
> > ++ char *filename = strdup(fifo);
> > ++ char *end;
> > ++ if ((end = strchr(filename, ' ')) != NULL) {
> > ++ *end = '\0';
> > ++ }
> > ++
> > ++ int rfd = open(filename, O_RDONLY);
> > ++ if (rfd < 0) {
> > ++ free(filename);
> > ++ return false;
> > ++ }
> > ++
> > ++ int wfd = open(filename, O_WRONLY);
> > ++ if (wfd < 0) {
> > ++ close(rfd);
> > ++ free(filename);
> > ++ return false;
> > ++ }
> > ++
> > ++ free(filename);
> > ++
> > ++ rfd_ = rfd;
> > ++ wfd_ = wfd;
> > ++ closeFds_ = true;
> > ++
> > ++ return true;
> > ++}
> > ++
> > + int GNUmakeTokenPoolPosix::dup_rfd_ = -1;
> > +
> > + void GNUmakeTokenPoolPosix::CloseDupRfd(int signum) {
> > +@@ -89,6 +125,13 @@ bool GNUmakeTokenPoolPosix::SetAlarmHandler()
> > {
> > + }
> > +
> > + bool GNUmakeTokenPoolPosix::ParseAuth(const char* jobserver) {
> > ++ // check for jobserver-fifo style
> > ++ const char* fifo;
> > ++ if (((fifo = strstr(jobserver, "=fifo:")) != NULL) &&
> > ++ CheckFifo(fifo + 6))
> > ++ return SetAlarmHandler();
> > ++
> > ++ // check for legacy simple pipe style
> > + int rfd = -1;
> > + int wfd = -1;
> > + if ((sscanf(jobserver, "%*[^=]=%d,%d", &rfd, &wfd) == 2) &&
> > +@@ -100,6 +143,7 @@ bool GNUmakeTokenPoolPosix::ParseAuth(const
> > char* jobserver) {
> > + return true;
> > + }
> > +
> > ++ // some jobserver style we don't support
> > + return false;
> > + }
> > +
> > +diff --git a/src/tokenpool_test.cc b/src/tokenpool_test.cc
> > +index 9d07146..e15da6c 100644
> > +--- a/src/tokenpool_test.cc
> > ++++ b/src/tokenpool_test.cc
> > +@@ -19,7 +19,10 @@
> > + #ifdef _WIN32
> > + #include <windows.h>
> > + #else
> > ++#include <fcntl.h>
> > + #include <unistd.h>
> > ++#include <sys/types.h>
> > ++#include <sys/stat.h>
> > + #endif
> > +
> > + #include <stdio.h>
> > +@@ -35,6 +38,8 @@
> > + #define AUTH_FORMAT(tmpl) "foo " tmpl "=%d,%d bar"
> > + #define ENVIRONMENT_CLEAR() unsetenv("MAKEFLAGS")
> > + #define ENVIRONMENT_INIT(v) setenv("MAKEFLAGS", v, true)
> > ++
> > ++#define FIFO_NAME "ninja-test-tokenpool-fifo"
> > + #endif
> > +
> > + namespace {
> > +@@ -60,11 +65,24 @@ struct TokenPoolTest : public testing::Test {
> > + semaphore_name_ = SEMAPHORE_NAME;
> > + if ((semaphore_ = CreateSemaphore(0, 0, 2, SEMAPHORE_NAME))
> > == NULL)
> > + #else
> > ++ if (mkfifo(FIFO_NAME, 0600) < 0) {
> > ++ ASSERT_TRUE(false);
> > ++ }
> > ++
> > + if (pipe(fds_) < 0)
> > + #endif
> > + ASSERT_TRUE(false);
> > + }
> > +
> > ++ void GetPool(bool ignore_jobserver) {
> > ++ if ((tokens_ = TokenPool::Get()) != NULL) {
> > ++ if (!tokens_->SetupClient(ignore_jobserver, false,
> > load_avg_)) {
> > ++ delete tokens_;
> > ++ tokens_ = NULL;
> > ++ }
> > ++ }
> > ++ }
> > ++
> > + void CreatePool(const char* format, bool ignore_jobserver =
> > false) {
> > + if (format) {
> > + sprintf(buf_, format,
> > +@@ -76,18 +94,30 @@ struct TokenPoolTest : public testing::Test {
> > + );
> > + ENVIRONMENT_INIT(buf_);
> > + }
> > +- if ((tokens_ = TokenPool::Get()) != NULL) {
> > +- if (!tokens_->SetupClient(ignore_jobserver, false,
> > load_avg_)) {
> > +- delete tokens_;
> > +- tokens_ = NULL;
> > +- }
> > +- }
> > ++ GetPool(ignore_jobserver);
> > + }
> > +
> > + void CreateDefaultPool() {
> > + CreatePool(AUTH_FORMAT("--jobserver-auth"));
> > + }
> > +
> > ++#ifndef _WIN32
> > ++ void CreateFifoPool() {
> > ++ // close simple pipe fds...
> > ++ close(fds_[0]);
> > ++ close(fds_[1]);
> > ++
> > ++ // ... and open named pipe instead
> > ++ if ((fds_[0] = open(FIFO_NAME, O_RDONLY|O_NONBLOCK)) < 0)
> > ++ ASSERT_TRUE(false);
> > ++ if ((fds_[1] = open(FIFO_NAME, O_WRONLY)) < 0)
> > ++ ASSERT_TRUE(false);
> > ++
> > ++ ENVIRONMENT_INIT("foo --jobserver-auth=fifo:" FIFO_NAME "
> > bar");
> > ++ GetPool(false);
> > ++ }
> > ++#endif
> > ++
> > + virtual void TearDown() {
> > + if (tokens_)
> > + delete tokens_;
> > +@@ -96,6 +126,7 @@ struct TokenPoolTest : public testing::Test {
> > + #else
> > + close(fds_[0]);
> > + close(fds_[1]);
> > ++ unlink(FIFO_NAME);
> > + #endif
> > + ENVIRONMENT_CLEAR();
> > + }
> > +@@ -167,6 +198,15 @@ TEST_F(TokenPoolTest, MonitorFD) {
> > +
> > + EXPECT_EQ(fds_[0], tokens_->GetMonitorFd());
> > + }
> > ++
> > ++TEST_F(TokenPoolTest, MonitorFDFifo) {
> > ++ CreateFifoPool();
> > ++
> > ++ ASSERT_NE(NULL, tokens_);
> > ++ EXPECT_EQ(kLoadAverageDefault, load_avg_);
> > ++
> > ++ EXPECT_NE(-1, tokens_->GetMonitorFd());
> > ++}
> > + #endif
> > +
> > + TEST_F(TokenPoolTest, ImplicitToken) {
> > +@@ -226,6 +266,42 @@ TEST_F(TokenPoolTest, TwoTokens) {
> > + EXPECT_TRUE(tokens_->Acquire());
> > + }
> > +
> > ++#ifndef _WIN32
> > ++TEST_F(TokenPoolTest, TwoTokensFifo) {
> > ++ CreateFifoPool();
> > ++
> > ++ ASSERT_NE(NULL, tokens_);
> > ++ EXPECT_EQ(kLoadAverageDefault, load_avg_);
> > ++
> > ++ // implicit token
> > ++ EXPECT_TRUE(tokens_->Acquire());
> > ++ tokens_->Reserve();
> > ++ EXPECT_FALSE(tokens_->Acquire());
> > ++
> > ++ // jobserver offers 2nd token
> > ++ char test_tokens[1] = { '+' };
> > ++ ASSERT_EQ(1u, write(fds_[1], test_tokens,
> > sizeof(test_tokens)));
> > ++ EXPECT_TRUE(tokens_->Acquire());
> > ++ tokens_->Reserve();
> > ++ EXPECT_FALSE(tokens_->Acquire());
> > ++
> > ++ // release 2nd token
> > ++ tokens_->Release();
> > ++ EXPECT_TRUE(tokens_->Acquire());
> > ++
> > ++ // release implicit token - must return 2nd token back to
> > jobserver
> > ++ tokens_->Release();
> > ++ EXPECT_TRUE(tokens_->Acquire());
> > ++
> > ++ // there must be one token available
> > ++ EXPECT_EQ(1u, read(fds_[0], buf_, sizeof(buf_)));
> > ++ EXPECT_EQ(test_tokens[0], buf_[0]);
> > ++
> > ++ // implicit token
> > ++ EXPECT_TRUE(tokens_->Acquire());
> > ++}
> > ++#endif
> > ++
> > + TEST_F(TokenPoolTest, Clear) {
> > + CreateDefaultPool();
> > +
> > +--
> > +2.44.0
> > +
> > diff --git a/meta/recipes-devtools/ninja/ninja_1.11.1.bb
> > b/meta/recipes-devtools/ninja/ninja_1.11.1.bb
> > index 8e297ec4d4..dbff2e191a 100644
> > --- a/meta/recipes-devtools/ninja/ninja_1.11.1.bb
> > +++ b/meta/recipes-devtools/ninja/ninja_1.11.1.bb
> > @@ -6,9 +6,13 @@ LIC_FILES_CHKSUM =
> > "file://COPYING;md5=a81586a64ad4e476c791cda7e2f2c52e"
> >
> > DEPENDS = "re2c-native ninja-native"
> >
> > -SRCREV = "a524bf3f6bacd1b4ad85d719eed2737d8562f27a"
> > +SRCREV = "95dee2a91d96c409d54f9fa0b70ea9aa2bdf8e63"
> >
> > -SRC_URI = "git://github.com/ninja-
> > build/ninja.git;branch=release;protocol=https"
> > +SRC_URI = " \
> > + git://github.com/kitware/ninja.git;branch=kitware-staged-
> > features;protocol=https \
> > + file://0001-Rename-TokenPool-Setup-to-SetupClient.patch \
> > +
> > file://0002-Add-GNU-make-jobserver-fifo-style-client-support.patch
> > \
> > +"
> > UPSTREAM_CHECK_GITTAGREGEX = "v(?P<pver>.*)"
> >
> > S = "${WORKDIR}/git"
> > --
> > 2.44.0
> >
>
> >
> > -=-=-=-=-=-=-=-=-=-=-=-
> > Links: You receive all messages sent to this group.
> > View/Reply Online (#197956):
> > https://lists.openembedded.org/g/openembedded-core/message/197956
> > Mute This Topic:
> > https://lists.openembedded.org/mt/105326967/3617179
> > Group Owner: openembedded-core+owner@lists.openembedded.org
> > Unsubscribe:
> > https://lists.openembedded.org/g/openembedded-core/unsub [
> > alexandre.belloni@bootlin.com]
> > -=-=-=-=-=-=-=-=-=-=-=-
> >
>
>
next prev parent reply other threads:[~2024-08-02 10:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-04 11:16 [PATCH v2 0/5] Jobserver support Martin Hundebøll
2024-04-04 11:16 ` [PATCH v2 1/5] classes: jobserver: support gnu make fifo jobserver Martin Hundebøll
2024-04-04 11:16 ` [PATCH v2 2/5] scripts: build-env: allow passing JOBSERVER_FIFO from environment Martin Hundebøll
2024-04-04 11:16 ` [PATCH v2 3/5] ninja: build modified version with GNU Make jobserver support Martin Hundebøll
2024-04-25 11:30 ` [OE-core] " Alexandre Belloni
2024-08-02 10:24 ` Martin Hundebøll [this message]
2024-08-02 10:41 ` Alexandre Belloni
2024-11-18 2:29 ` [OE-core] [PATCH v2 3/5] ninja: build modified version with GNU Make jobserver support -> (jobserver, loadfactor, pressure and all that!) Randy MacLeod
2024-12-02 20:07 ` Martin Hundebøll
2024-12-02 20:25 ` Randy MacLeod
2024-12-02 20:30 ` Martin Hundebøll
2024-04-04 11:16 ` [PATCH v2 4/5] qemu: enable parallel builds when using the jobserver class Martin Hundebøll
2024-04-04 11:16 ` [PATCH v2 5/5] contrib: add python service and systemd unit to run shared jobserver Martin Hundebøll
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f47e5c53e97b190852dc5578e0c3f0fe140803da.camel@geanix.com \
--to=martin@geanix.com \
--cc=alex.kanavin@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andreaskleist@gmail.com \
--cc=openembedded-core@lists.openembedded.org \
--cc=raj.khem@gmail.com \
--cc=randy.macleod@windriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox