From: Paul Eggleton <paul.eggleton@linux.intel.com>
To: Trevor Woerner <twoerner@gmail.com>
Cc: openembedded-devel@lists.openembedded.org
Subject: Re: [OE-core] State of bitbake world
Date: Thu, 02 May 2013 18:00:23 +0100 [thread overview]
Message-ID: <1838142.bVj6QfWozi@helios> (raw)
In-Reply-To: <CAHUNapSbKx1baQ++toBir_uw6uWhFun7yA9GwRpNYoTm=7L4BA@mail.gmail.com>
On Thursday 02 May 2013 12:30:59 Trevor Woerner wrote:
> On Thu, May 2, 2013 at 11:57 AM, Paul Barker <paul@paulbarker.me.uk> wrote:
> > The recipe also has dependencies
> > outside meta-oe (fluidsynth in meta-multimedia IIRC) but that's a
> > separate issue.
>
> I've noticed that too. Shouldn't dependencies be contained within the
> same layer? Is it normal from these dependencies to be spread out over
> various layers?
For meta-oe, this is unusual yes. In fact having checked recently this is the
only case I'm aware of where a recipe in meta-oe depends on a recipe in
another layer other than OE-Core, at least with no PACKAGECONFIG alterations.
For this specific instance, it would be great if someone would send a patch to
move fluidsynth to meta-multimedia.
Cheers,
Paul
--
Paul Eggleton
Intel Open Source Technology Centre
next prev parent reply other threads:[~2013-05-02 17:18 UTC|newest]
Thread overview: 105+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-13 17:42 State of bitbake world Martin Jansa
2012-12-13 18:20 ` [OE-core] " Andreas Müller
2012-12-13 18:47 ` Martin Jansa
2012-12-13 18:57 ` Saul Wold
2012-12-13 19:15 ` Martin Jansa
2012-12-23 20:16 ` Martin Jansa
2012-12-23 21:42 ` [OE-core] " Andreas Müller
2012-12-24 7:11 ` Martin Jansa
2012-12-24 7:36 ` Martin Jansa
2012-12-24 9:12 ` Martin Jansa
2012-12-25 8:56 ` Martin Jansa
2012-12-25 20:04 ` [OE-core] " Paul Eggleton
2012-12-26 10:59 ` Martin Jansa
2012-12-26 19:57 ` Martin Jansa
2013-01-09 13:28 ` Martin Jansa
2013-01-09 15:17 ` [OE-core] " Andreas Müller
2013-01-09 16:25 ` Burton, Ross
2013-04-13 14:44 ` Martin Jansa
2013-04-17 12:25 ` Andreas Müller
2013-03-03 12:39 ` Martin Jansa
2013-03-03 12:59 ` [OE-core] " Richard Purdie
2013-03-05 9:32 ` Andrea Adami
2013-04-15 14:12 ` Martin Jansa
2013-04-15 14:45 ` Koen Kooi
2013-04-15 14:52 ` Burton, Ross
2013-04-15 15:06 ` [OE-core] " Martin Jansa
2013-04-15 15:13 ` Koen Kooi
2013-04-15 15:26 ` Burton, Ross
2013-04-27 10:54 ` Martin Jansa
2013-04-27 11:23 ` [OE-core] " Paul Eggleton
2013-04-27 11:35 ` Martin Jansa
2013-04-27 16:21 ` Paul Barker
2013-04-27 16:27 ` Paul Barker
2013-04-27 17:06 ` Martin Jansa
2013-04-27 12:22 ` Koen Kooi
2013-04-27 17:18 ` Khem Raj
2013-04-27 18:23 ` Andreas Müller
[not found] ` <CAHUNapTLCo5YU_=U9cgYqfcLR5amYtpD0UDe0T-Y_+=81Kt37w@mail.gmail.com>
2013-05-01 18:56 ` Martin Jansa
2013-04-27 17:14 ` Martin Jansa
2013-04-28 21:35 ` Andrea Adami
2013-05-02 15:18 ` Martin Jansa
2013-05-02 15:28 ` [OE-core] " Andreas Müller
2013-05-02 15:57 ` Paul Barker
[not found] ` <CAHUNapSbKx1baQ++toBir_uw6uWhFun7yA9GwRpNYoTm=7L4BA@mail.gmail.com>
2013-05-02 17:00 ` Paul Eggleton [this message]
2013-05-02 17:08 ` [OE-core] " Paul Barker
2013-05-02 17:19 ` Paul Eggleton
2013-05-02 17:21 ` Paul Eggleton
2013-05-02 17:22 ` Martin Jansa
2013-05-03 7:23 ` Andreas Müller
2013-05-03 7:24 ` Andreas Müller
2013-05-03 14:29 ` Stefan Herbrechtsmeier
2013-05-06 12:23 ` Stefan Herbrechtsmeier
2013-05-06 19:15 ` [OE-core] " Paul Barker
[not found] ` <CAHUNapTu45Wpm1zx+vpHUgyduk8rnzdJSninsoOOw6v34ViipQ@mail.gmail.com>
2013-05-07 8:38 ` Paul Barker
2013-05-07 11:50 ` Philip Balister
2013-05-16 7:52 ` Martin Jansa
2013-05-16 9:14 ` Martin Jansa
2013-05-16 12:37 ` [OE-core] " Andreas Müller
2013-05-16 10:36 ` Paul Barker
2013-05-27 11:47 ` Paul Barker
2013-05-20 13:06 ` Martin Jansa
2013-06-03 15:10 ` Martin Jansa
2013-06-03 16:03 ` [OE-core] " Andreas Müller
2013-06-04 11:58 ` Martin Jansa
2013-06-11 16:04 ` Martin Jansa
2013-06-12 17:07 ` [OE-core] " Paul Barker
2013-06-12 22:02 ` Khem Raj
2013-06-17 0:02 ` Paul Barker
2013-06-17 0:13 ` Paul Barker
2013-06-17 3:25 ` Martin Jansa
2013-06-19 8:07 ` Paul Barker
2013-06-19 8:19 ` Richard Purdie
2013-06-20 2:28 ` Khem Raj
2013-06-20 9:39 ` Paul Barker
2013-06-20 10:16 ` Paul Eggleton
2013-06-20 10:25 ` Paul Eggleton
2013-06-20 10:50 ` Paul Barker
2013-06-20 10:52 ` Paul Barker
2013-07-07 10:51 ` Paul Barker
2013-06-22 18:16 ` Martin Jansa
2013-07-25 16:23 ` Martin Jansa
2013-08-08 22:54 ` Martin Jansa
2013-08-11 11:44 ` Martin Jansa
2013-08-12 11:32 ` [OE-core] " Joe MacDonald
2013-08-12 11:50 ` Martin Jansa
2013-08-12 15:46 ` Khem Raj
2013-08-25 21:39 ` Martin Jansa
2013-09-17 12:30 ` Martin Jansa
2013-10-03 15:28 ` State of bitbake world - test-dependencies Martin Jansa
2013-10-20 19:43 ` State of bitbake world Martin Jansa
2013-10-21 8:32 ` Burton, Ross
2013-10-21 8:58 ` [OE-core] " Andrea Adami
2013-10-21 10:38 ` Martin Jansa
2013-10-21 11:06 ` Andrea Adami
2013-10-30 23:08 ` Martin Jansa
2013-11-19 15:50 ` Martin Jansa
2013-11-19 15:56 ` [OE-core] " Joe MacDonald
2013-11-19 16:01 ` Andrea Adami
2013-11-19 18:21 ` Martin Jansa
2013-11-19 15:59 ` Andreas Müller
2013-11-19 18:20 ` Martin Jansa
2013-11-19 18:36 ` Paul Eggleton
2013-11-19 18:51 ` Martin Jansa
2013-11-19 16:30 ` Paul Eggleton
2013-11-19 18:24 ` Martin Jansa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1838142.bVj6QfWozi@helios \
--to=paul.eggleton@linux.intel.com \
--cc=openembedded-devel@lists.openembedded.org \
--cc=twoerner@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox