Openembedded Devel Discussions
 help / color / mirror / Atom feed
From: Khem Raj <raj.khem@gmail.com>
To: openembedded-devel@lists.openembedded.org
Subject: Re: gcc-cross-sdk (GCC 4.2.3) limits.h woes
Date: Thu, 13 Aug 2009 08:59:09 -0700	[thread overview]
Message-ID: <20090813155909.GC8906@gmail.com> (raw)
In-Reply-To: <1250176750.29049.1003.camel@conroy-linux>

On (13/08/09 11:19), Chris Conroy wrote:
> I've spent a pretty good chunk of time this past week trying to get a
> working external toolchain, but I've hit a bit of a wall and can't
> figure out how to fix this last problem.
> 
> I'm trying to build a gcc-cross-sdk with GCC 4.2.3, and for a while I
> faced a chicken-and-egg problem of finding limits.h where the creation
> of the cross-sdk would succeed only if the eventual install location
> (in /usr/local/path/to/toolchain/ existed). By pulling in the
> sdk-libstdc++-includes.patch from poky, I was able to remove this issue
> during the creation of gcc-cross-sdk.
> 
> Now, chicken and egg fixed (properly?) using the external toolchain
> results in cross packages failing to find limits.h (specifically, the
> #include_next<limits.h> in ${prefix}/usr/include/limits.h. It's unclear
> to me which (if any) limits.h should be installed (and where).

limits.h should come from glibc. which should include the one provided
by gcc in include-fixed gcc-cross-sdk should have done that.
Deleting include_next is not the correct thing to do.
> 
> I've run through the gcc-cross-sdk work directory and was unable to find
> any obvious choices (all of the copies there also asked for an
> include_next).
> 
> If I make the assumption that this is just an erroneous include_next, I
> can successfully compile and run some packages. However, I cannot build
> the kernel because it fails on the assembly inside asm_offsets.c. This
> leads me to believe that removing that include_next was not a valid fix
> (no surprise there), and perhaps fixing this limits.h issue properly
> will be the last step in creating a working external toolchain. I don't
> see any obvious choices within gcc, but perhaps I need to pull from
> glibc, glibc-initial, or perhaps a particular host file?
> 
> Note that this is NOT GCC 4.3.x which moved the fixincludes directory
> and made some issues with finding limits.h. Most of the references I've
> found to this bug indicate that people had this working before upgrading
> to 4.3.x, and therefore I'm a bit surprised to be running into a similar
> issue with 4.2.x
> 
> (For reference, this is with glibc 2.7 and binutils 2.19 for a
> mipsel-linux target building on an x86_64 host)
> 
> --Chris Conroy
> 
> 
> 
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel



  parent reply	other threads:[~2009-08-13 16:15 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-13 15:19 gcc-cross-sdk (GCC 4.2.3) limits.h woes Chris Conroy
2009-08-13 15:52 ` Holger Hans Peter Freyther
2009-08-13 15:59 ` Khem Raj [this message]
2009-08-18 16:27   ` Chris Conroy
2009-08-18 17:41     ` Denys Dmytriyenko
2009-08-18 18:30       ` Chris Conroy
2009-08-18 19:50         ` Tom Rini
2009-08-18 20:10           ` Chris Conroy
2009-08-18 21:21             ` Phil Blundell
2009-08-18 21:25             ` Khem Raj
2009-08-18 21:32               ` Phil Blundell
2009-08-18 22:42                 ` External Toolchains " Denys Dmytriyenko
2009-08-19  3:17         ` Holger Hans Peter Freyther
2009-08-19 14:26           ` Chris Conroy
2009-08-19 15:11             ` Holger Hans Peter Freyther
2009-08-18 21:39       ` Is there an easy way to get a minimalist image without I18n libraries? Lars Holowko
2009-08-19 12:24         ` Is there an easy way to get a minimalist image without I18nLibraries? marcin
2009-08-19 20:32           ` Lars Holowko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090813155909.GC8906@gmail.com \
    --to=raj.khem@gmail.com \
    --cc=openembedded-devel@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox