Re: [PATCHv3 1/5] u-boot_git:add patch for am3517-crane board support

[Stefan Schmidt <stefan@datenfreihafen.org>]

Hello.

On Tue, 2010-12-07 at 16:34, Koen Kooi wrote:
> 
> On 07-12-10 12:38, Stefan Schmidt wrote:
> > Hello.
> > 
> > On Tue, 2010-11-30 at 11:32, Anil Kumar wrote:
> >>     * Patch Version updated for latest git tree.
> >>
> >>     * This patch adds u-boot support for am3517-crane board.
> >>
> >>     * CraneBoard is a hardware development platform based
> >>       on the Sitara AM3517 ARM Cortex - A8 microprocessor
> >>       device. This is a low cost reference design.
> >>
> >>     * You can find more about CraneBoard here:
> >>            [1] http://www.ti.com/arm
> >>            [2] http://www.mistralsolutions.com/products/craneboard.php
> >>
> >> Signed-off-by: Anil Kumar <anilm@mistralsolutions.com>
> > 
> > I only reviewd the OE part, not the u-boot patch itself.
> > 
> > Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
> > 
> > Who is going to take this one? On some earlier iterations I have seen Koen
> > stating that he will take them. Still the case?
> 
> It is. My craneboard should be arriving this week, so I'm waiting for
> that :)

As you will handle this I toss it from my todo list. :)

regards
Stefan Schmidt