Openembedded Devel Discussions
 help / color / mirror / Atom feed
From: Denys Dmytriyenko <denis@denix.org>
To: "Burton, Ross" <ross.burton@intel.com>
Cc: OpenEmbedded Devel List
	<openembedded-devel@lists.openembedded.org>,
	Denys Dmytriyenko <denys@ti.com>
Subject: Re: [meta-networking][PATCH] ndisc6: need to set USE_NLS="yes" to use gettext.h
Date: Fri, 26 Jan 2018 19:50:45 -0500	[thread overview]
Message-ID: <20180127005045.GC2786@denix.org> (raw)
In-Reply-To: <CAJTo0LaW1k-BvGN0jtQJMcNQj74uarz6QN7qBnMKUUw-9DpD2Q@mail.gmail.com>

Yes, but in this case upstream is the ndisc recipe - see do_configure_prepend 
in the patch below that does copying of gettext.h from STAGING_DATADIR_NATIVE.

-- 
Denys


On Fri, Jan 26, 2018 at 11:52:23PM +0000, Burton, Ross wrote:
> Oh right, presumably your distro is turning off NLS.  Yeah if the upstream
> doesn't understand how to turn it off, then yes this would be the
> workaround.
> 
> Ross
> 
> On 26 January 2018 at 22:10, Denys Dmytriyenko <denis@denix.org> wrote:
> 
> > Not really:
> >
> > ERROR: ndisc6-1.0.4+gitAUTOINC+4c794b5512-r0 do_configure: Function
> > failed: do_configure (log file is located at .../work/armv7ahf-neon-linux-
> > gnueabi/ndisc6/1.0.4+gitAUTOINC+4c794b5512-r0/temp/log.do_configure.23315)
> > ERROR: Logfile of failure stored in: .../work/armv7ahf-neon-linux-
> > gnueabi/ndisc6/1.0.4+gitAUTOINC+4c794b5512-r0/temp/log.do_configure.23315
> > Log data follows:
> > | DEBUG: Executing shell function do_configure
> > | cp: cannot stat '.../work/armv7ahf-neon-linux-gnueabi/ndisc6/1.0.4+
> > gitAUTOINC+4c794b5512-r0/recipe-sysroot-native/usr/share/gettext/gettext.h':
> > No such file or directory
> > | WARNING: .../work/armv7ahf-neon-linux-gnueabi/ndisc6/1.0.4+
> > gitAUTOINC+4c794b5512-r0/temp/run.do_configure.23315:1 exit 1 from 'cp
> > .../work/armv7ahf-neon-linux-gnueabi/ndisc6/1.0.4+
> > gitAUTOINC+4c794b5512-r0/recipe-sysroot-native/usr/share/gettext/gettext.h
> > .../work/armv7ahf-neon-linux-gnueabi/ndisc6/1.0.4+
> > gitAUTOINC+4c794b5512-r0/git/include'
> > | ERROR: Function failed: do_configure (log file is located at
> > .../work/armv7ahf-neon-linux-gnueabi/ndisc6/1.0.4+
> > gitAUTOINC+4c794b5512-r0/temp/log.do_configure.23315)
> > ERROR: Task (/OE/arago-rocko/sources/meta-openembedded/meta-networking/
> > recipes-support/ndisc6/ndisc6_git.bb:do_configure) failed with exit code
> > '1'
> >
> >
> >
> > On Wed, Jan 24, 2018 at 10:53:08AM +0000, Burton, Ross wrote:
> > > That should only be true for native recipes?
> > >
> > > On 23 January 2018 at 22:39, Denys Dmytriyenko <denis@denix.org> wrote:
> > >
> > > > Ping.
> > > >
> > > >
> > > > On Tue, Jan 16, 2018 at 01:43:35AM -0500, Denys Dmytriyenko wrote:
> > > > > From: Denys Dmytriyenko <denys@ti.com>
> > > > >
> > > > > Otherwise we can get gettext-minimal-native dependency instead, which
> > > > does not
> > > > > provide gettext.h header.
> > > > >
> > > > > Signed-off-by: Denys Dmytriyenko <denys@ti.com>
> > > > > ---
> > > > >  meta-networking/recipes-support/ndisc6/ndisc6_git.bb | 2 ++
> > > > >  1 file changed, 2 insertions(+)
> > > > >
> > > > > diff --git a/meta-networking/recipes-support/ndisc6/ndisc6_git.bb
> > > > b/meta-networking/recipes-support/ndisc6/ndisc6_git.bb
> > > > > index 48a83b8..58f1230 100644
> > > > > --- a/meta-networking/recipes-support/ndisc6/ndisc6_git.bb
> > > > > +++ b/meta-networking/recipes-support/ndisc6/ndisc6_git.bb
> > > > > @@ -22,6 +22,8 @@ EXTRA_OECONF += "PERL=${USRBINPATH}/perl"
> > > > >  LDFLAGS += "-fuse-ld=gold"
> > > > >  TOOLCHAIN = "gcc"
> > > > >
> > > > > +USE_NLS = "yes"
> > > > > +
> > > > >  do_configure_prepend() {
> > > > >      cp ${STAGING_DATADIR_NATIVE}/gettext/gettext.h ${S}/include
> > > > >      ${S}/autogen.sh
> > > > > --
> > > > > 2.7.4
> > > > >
> > > > > --
> > > > > _______________________________________________
> > > > > Openembedded-devel mailing list
> > > > > Openembedded-devel@lists.openembedded.org
> > > > > http://lists.openembedded.org/mailman/listinfo/openembedded-devel
> > > > --
> > > > _______________________________________________
> > > > Openembedded-devel mailing list
> > > > Openembedded-devel@lists.openembedded.org
> > > > http://lists.openembedded.org/mailman/listinfo/openembedded-devel
> > > >
> >


  reply	other threads:[~2018-01-27  0:50 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-16  6:43 [meta-networking][PATCH] ndisc6: need to set USE_NLS="yes" to use gettext.h Denys Dmytriyenko
2018-01-23 22:39 ` Denys Dmytriyenko
2018-01-24 10:53   ` Burton, Ross
2018-01-26 22:10     ` Denys Dmytriyenko
2018-01-26 23:52       ` Burton, Ross
2018-01-27  0:50         ` Denys Dmytriyenko [this message]
2018-02-08 17:37   ` Denys Dmytriyenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180127005045.GC2786@denix.org \
    --to=denis@denix.org \
    --cc=denys@ti.com \
    --cc=openembedded-devel@lists.openembedded.org \
    --cc=ross.burton@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox