Openembedded Devel Discussions
 help / color / mirror / Atom feed
From: Jan Pannecoeck <jpa@mgb-tech.com>
To: openembedded-devel@lists.openembedded.org
Subject: Re: Automatically connect to ethernet
Date: Tue, 10 Mar 2009 11:38:44 +0100	[thread overview]
Message-ID: <49B64334.6020606@mgb-tech.com> (raw)
In-Reply-To: <1236632966.29394.25.camel@cheeto.emacinc.com>

Thanks for the ifplugd tip, I've tried to cross-compile it for the ARM 
I'm using but didn't succeeded yet... I'll try again later! :-)

Thanks,
Jan

Travis Stratman wrote:
> Jan,
>
> On Mon, 2009-03-09 at 11:32 +0100, Jan Pannecoeck wrote:
>   
>> So my problem is that linux does not connect to the DHCP server 
>> automatically when I plug in the ethernetcable. When I plug-in the cable 
>> before I launch the linux, this is working fine because at start-up the 
>> DHCP-server is asked for a new IP-lease. But when I don't plug-in the 
>> cable, and I plug it in when linux is already booted, the DHCP-server 
>> isn't contacted for a new IP-lease and I can't connect to the Internet. 
>> I can use the "/etc/init.d/networking restart" command but this isn't a 
>> solution of course because it should work all the time, also if I'm not 
>> there to enter that command...
>>
>> So, do I  have to change some settings in the kernel, or do I have to 
>> install some extra packages to get this working properly?
>>
>>     
>
> You should look at ifplugd. This will detect the network link beat and
> bring the interface up/down as required.
>
> TAS
>
>   
>> Thanks in advance,
>> Jan Pannecoeck
>>
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>>     
>
>
> _______________________________________________
> Openembedded-devel mailing list
> Openembedded-devel@lists.openembedded.org
> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
>
>   



      reply	other threads:[~2009-03-10 15:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-09 10:32 Automatically connect to ethernet Jan Pannecoeck
2009-03-09 21:09 ` Travis Stratman
2009-03-10 10:38   ` Jan Pannecoeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49B64334.6020606@mgb-tech.com \
    --to=jpa@mgb-tech.com \
    --cc=openembedded-devel@lists.openembedded.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox