From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from [81.228.8.164] (helo=pne-smtpout2-sn2.hy.skanova.net) by linuxtogo.org with esmtp (Exim 4.69) (envelope-from ) id 1Mbyug-00008K-NL for openembedded-devel@lists.openembedded.org; Fri, 14 Aug 2009 17:41:54 +0200 Received: from [10.175.196.247] (213.66.88.44) by pne-smtpout2-sn2.hy.skanova.net (7.3.140.3) (authenticated as u82406562) id 4A5BC8BE0027E65E for openembedded-devel@lists.openembedded.org; Fri, 14 Aug 2009 17:25:14 +0200 Message-ID: <4A8581D9.9010205@atmel.com> Date: Fri, 14 Aug 2009 17:25:13 +0200 From: Ulf Samuelsson Organization: Atmel Nordic AB User-Agent: Thunderbird 2.0.0.22 (X11/20090605) MIME-Version: 1.0 To: openembedded-devel@lists.openembedded.org References: <4A8516BF.9080405@atmel.com> In-Reply-To: Subject: Re: No graphic when loading "x11-gpe-image" X-BeenThere: openembedded-devel@lists.openembedded.org X-Mailman-Version: 2.1.11 Precedence: list Reply-To: openembedded-devel@lists.openembedded.org List-Id: Using the OpenEmbedded metadata to build Distributions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 14 Aug 2009 15:41:55 -0000 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: Quoted-Printable Koen Kooi skrev: > On 14-08-09 09:48, Ulf Samuelsson wrote: >> I have tried opie-image which boots properly and I get a screen >> >> x11-gpe-image does not start properly. >> Only a black screen. >=20 > My crystal ball is broken, without some log files or output we can't > help you >=20 >=20 There is really no output gpe_dm is started and then nothing happens. I can use mplayer to play a video, but I do not get the X-Environment. opie-image uses the same kernel settings and this boots OK with the right environment. Anyone got a working ARM926EJ-S jffs2 image I can test on? > *** AT91Bootstrap-2.13-rc1 > AT45DB642D detected > Valid image found > From: [0x00008400] To: [0x23F00000] Size: [0x00040000] > ........SUCCESS > Start: [0x23F00000] U-Boot 2009.08-rc2 (Aug 13 2009 - 08:57:38) DRAM: 64 MB NAND: 256 MiB DataFlash:AT45DB642 Nb pages: 8192 Page Size: 1056 Size=3D 8650752 bytes Logical address: 0xC0000000 Area 0: C0000000 to C00041FF (RO) Bootstrap Area 1: C0004200 to C00083FF Environment Area 2: C0008400 to C0041FFF (RO) U-Boot Area 3: C0084000 to C0293FFF Kernel Area 4: C0294000 to C083FFFF FS Net: macb0 macb0: Starting autonegotiation... macb0: Autonegotiation complete macb0: link up, 100Mbps full-duplex (lpa: 0xc5e1) Hit any key to stop autoboot: 0 Saving Environment to dataflash... ## Booting kernel from Legacy Image at 21000000 ... Image Name: Angstrom/2.6.30.2/at91sam9263dfc Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 2072200 Bytes =3D 2 MB Load Address: 20008000 Entry Point: 20008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux....................................................................= .................................................................. done, booting the kernel. [ 0.000000] Linux version 2.6.30.2 (ulf@grond) (gcc version 4.3.3 (GCC) ) #1 PREEMPT Fri Aug 14 00:23:38 CEST 2009 [ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=3D00053177 [ 0.000000] CPU: VIVT data cache, VIVT instruction cache [ 0.000000] Machine: Atmel AT91SAM9263-EK [ 0.000000] Ignoring unrecognised tag 0x54410008 [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] Clocks: CPU 199 MHz, master 99 MHz, main 16.367 MHz [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 [ 0.000000] Kernel command line: root=3D/dev/mtdblock1 rootfstype=3Djf= fs2 ip=3D10.175.196.18:10.175.196.247:10.175.196.1:255.255.255.0 console=3DttyS0,115200,mem=3D64M [ 0.000000] NR_IRQS:192 [ 0.000000] AT91: 160 gpio irqs in 5 banks [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] console [ttyS0] enabled [ 0.080000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.090000] Inode-cache hash table entries: 4096 (order: 2, 16384 byte= s) [ 0.100000] Memory: 64MB =3D 64MB total [ 0.110000] Memory: 60372KB available (3744K code, 492K data, 136K init, 0K highmem) [ 0.120000] Calibrating delay loop... 99.53 BogoMIPS (lpj=3D497664) [ 0.310000] Security Framework initialized [ 0.310000] Mount-cache hash table entries: 512 [ 0.320000] CPU: Testing write buffer coherency: ok [ 0.340000] net_namespace: 764 bytes [ 0.350000] NET: Registered protocol family 16 [ 0.380000] AT91: Power Management [ 0.390000] AT91: Starting after user reset [ 0.450000] bio: create slab at 0 [ 0.460000] SCSI subsystem initialized [ 0.470000] usbcore: registered new interface driver usbfs [ 0.470000] usbcore: registered new interface driver hub [ 0.480000] usbcore: registered new device driver usb [ 0.510000] NET: Registered protocol family 2 [ 0.510000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.520000] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.530000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.530000] TCP: Hash tables configured (established 2048 bind 2048) [ 0.540000] TCP reno registered [ 0.550000] NET: Registered protocol family 1 [ 0.560000] JFFS2 version 2.2. (NAND) (SUMMARY) =C2=A9 2001-2006 Red = Hat, Inc. [ 0.570000] msgmni has been set to 118 [ 0.590000] alg: No test for stdrng (krng) [ 0.590000] io scheduler noop registered [ 0.600000] io scheduler cfq registered (default) [ 0.610000] atmel_lcdfb atmel_lcdfb.0: 150KiB frame buffer at 239c0000 (mapped at ffc00000) [ 0.700000] Console: switching to colour frame buffer device 30x40 [ 0.710000] atmel_lcdfb atmel_lcdfb.0: fb0: Atmel LCDC at 0x00700000 (mapped at c48d6000), irq 26 [ 0.900000] atmel_usart.0: ttyS0 at MMIO 0xfeffee00 (irq =3D 1) is a ATMEL_SERIAL [ 0.900000] atmel_usart.1: ttyS1 at MMIO 0xfff8c000 (irq =3D 7) is a ATMEL_SERIAL [ 0.940000] loop: module loaded [ 0.950000] Driver 'sd' needs updating - please use bus_type methods [ 0.960000] MACB_mii_bus: probed [ 0.970000] eth0: Atmel MACB at 0xfffbc000 irq 21 (04:25:fe:ed:00:18) [ 0.970000] eth0: attached PHY driver [Davicom DM9161A] (mii_bus:phy_addr=3Dffffffff:00, irq=3D-1) [ 1.000000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit) [ 1.010000] AT91 NAND: 8-bit, Software ECC [ 1.020000] Scanning device for bad blocks [ 1.100000] Creating 3 MTD partitions on "atmel_nand": [ 1.110000] 0x000000000000-0x000000400000 : "Bootstrap" [ 1.120000] 0x000000400000-0x000008000000 : "Root File System" [ 1.130000] 0x000008000000-0x000010000000 : "Data" [ 1.140000] atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffa4000 (irq 14) [ 1.150000] mtd_dataflash spi0.0: AT45DB642x (8448 KBytes) pagesize 1056 bytes (OTP) [ 1.170000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.180000] at91_ohci at91_ohci: AT91 OHCI [ 1.190000] at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 [ 1.190000] at91_ohci at91_ohci: irq 29, io mem 0x00a00000 [ 1.260000] usb usb1: configuration #1 chosen from 1 choice [ 1.270000] hub 1-0:1.0: USB hub found [ 1.270000] hub 1-0:1.0: 2 ports detected [ 1.280000] Initializing USB Mass Storage driver... [ 1.290000] usbcore: registered new interface driver usb-storage [ 1.290000] USB Mass Storage support registered. [ 1.300000] mice: PS/2 mouse device common for all mice [ 1.310000] input: gpio-keys as /devices/platform/gpio-keys/input/inpu= t0 [ 1.320000] ads7846 spi0.3: touchscreen, irq 31 [ 1.320000] input: ADS784x Touchscreen as /devices/platform/atmel_spi.0/spi0.3/input/input1 [ 1.340000] rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 [ 1.350000] IRQ 1/rtc0: IRQF_DISABLED is not guaranteed on shared IRQs [ 1.350000] i2c /dev entries driver [ 1.360000] at24 0-0050: 65536 byte 24c512 EEPROM (writable) [ 1.370000] i2c-gpio i2c-gpio: using pins 68 (SDA) and 69 (SCL) [ 1.380000] AT91SAM9 Watchdog: sorry, watchdog is disabled [ 1.380000] at91_wdt: probe of at91_wdt failed with error -5 [ 1.390000] cpuidle: using governor ladder [ 1.390000] cpuidle: using governor menu [ 1.400000] Registered led device: ds1 [ 1.410000] Registered led device: ds2 [ 1.410000] Registered led device: ds3 [ 1.450000] usbcore: registered new interface driver usbhid [ 1.450000] usbhid: v2.6:USB HID core driver [ 1.460000] Advanced Linux Sound Architecture Driver Version 1.0.20. [ 1.470000] AC97C regs =3D FFFA0000 [ 1.470000] AC97C irq =3D 18 [ 1.480000] at91-ac97: codec write timeout <4>at91-ac97: codec write timeout <4>at91-ac97: codec write timeout <4>at91-ac97: codec write timeout <6>ALSA device list: [ 1.530000] #0: Atmel AC97 Controller at 0xfffa0000, irq 18 [ 1.540000] TCP cubic registered [ 1.540000] NET: Registered protocol family 17 [ 1.540000] RPC: Registered udp transport module. [ 1.550000] RPC: Registered tcp transport module. [ 1.560000] rtc-at91sam9 at91_rtt.0: setting system clock to 2009-08-14 00:40:40 UTC (1250210440) [ 1.650000] usb 1-1: new full speed USB device using at91_ohci and address 2 [ 1.830000] usb 1-1: configuration #1 chosen from 1 choice [ 1.840000] scsi0 : SCSI emulation for USB Mass Storage devices [ 3.090000] IP-Config: Complete: [ 3.090000] device=3Deth0, addr=3D10.175.196.18, mask=3D255.255.2= 55.0, gw=3D10.175.196.1, [ 3.100000] host=3D10.175.196.18, domain=3D, nis-domain=3D(none), [ 3.100000] bootserver=3D10.175.196.247, rootserver=3D10.175.196.247, rootpath=3D [ 13.450000] eth0: link up (100/Full) [ 13.450000] VFS: Mounted root (jffs2 filesystem) on device 31:1. [ 13.460000] Freeing init memory: 136K [ 13.470000] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 13.570000] sd 0:0:0:0: [sda] 31309760 512-byte hardware sectors: (16.0 GB/14.9 GiB) [ 13.580000] sd 0:0:0:0: [sda] Write Protect is off [ 13.580000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 13.620000] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 13.630000] sda: sda1 [ 13.650000] sd 0:0:0:0: [sda] Attached SCSI removable disk INIT: version 2.86 booting Please wait: booting... Starting udev[ 20.340000] udev: starting version 141 Remounting root file system... [ 28.600000] udc: at91_udc version 3 May 2006 [ 28.700000] g_serial gadget: Gadget Serial v2.4 [ 28.730000] g_serial gadget: g_serial ready [ 29.140000] Bluetooth: Core ver 2.15 [ 29.170000] NET: Registered protocol family 31 [ 29.170000] Bluetooth: HCI device and connection manager initialized [ 29.180000] Bluetooth: HCI socket layer initialized [ 29.570000] Bluetooth: L2CAP ver 2.13 [ 29.570000] Bluetooth: L2CAP socket layer initialized [ 29.710000] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 31.020000] NET: Registered protocol family 10 [ 31.340000] Bluetooth: RFCOMM socket layer initialized [ 31.340000] Bluetooth: RFCOMM TTY layer initialized [ 31.350000] Bluetooth: RFCOMM ver 1.11 ALSA: Restoring mixer settings... Configuring network interfaces... [ 34.450000] eth0: link down [ 35.250000] ADDRCONF(NETDEV_UP): eth0: link is not ready eth0 no wireless extensions. udhcpc (v1.13.2) started run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1 Sending discover... [ 37.450000] eth0: link up (100/Full) [ 37.450000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Sending discover... Sending select for 10.175.196.237... Lease of 10.175.196.237 obtained, lease time 86400 run-parts: /etc/udhcpc.d/00avahi-autoipd exited with code 1 adding dns 10.175.196.1 done. Starting portmap daemon: portmap. net.ipv4.conf.default.rp_filter =3D 1 net.ipv4.conf.all.rp_filter =3D 1 INIT: Entering runlevel: 5 Starting system message bus: dbus. Starting Hardware abstraction layer hald Starting Connection Manager Starting Dropbear SSH server: dropbear. Starting music player daemon: mpdlog: problem opening log file "/var/lib/mpd/mpd.log" (config line 33) for writing Aborted =2E Starting Samba: smbd nmbd. Starting syslogd/klogd: done * starting FTP Server: vsftpd... done. * Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon [ ok ] Running ntpdate to synchronize clock. Starting GPE display manager: gpe-dm .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution at91sam9263dfc ttyS0 Angstrom 2009.X-test-20090813 at91sam9263dfc ttyS0 at91sam9263dfc login: root root@at91sam9263dfc:~# > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel --=20 Best Regards Ulf Samuelsson