Re: pointercal ignored?

[Ulf Samuelsson <ulf.samuelsson@atmel.com>]

Marcin Juszkiewicz skrev:
> Dnia wtorek, 9 marca 2010 o 23:25:22 Ulf Samuelsson napisał(a):
>> I have built a custom variant of x11-gpe-image for the SAM9M10.
> 
> Which machine in OE covers that board? I have to admit that I did not tried to 
> hack mine.

I am building the SAM9G45EK, but I am using a 2.6.30 kernel
patched with maxim.org.za + www.linux4sam.org .exp3 patches
instead of the 2.6.32 currently in openembedded.

Also updated bootstrap and u-boot, but that won't affect this.

>  
>> When gpe is started, the Y direction seems to be compressed.
>> When I start the calculator and press at the top of the screen,
>> the calculator buttons 5 mm below gets pressed.
>> When I press at the bottom of the screen, the buttons 5 mm above
>> gets pressed.
>>
>> Changing /etc/pointercal manually seems to have no effect
>>
>> It's like pointercal gets ignored.
>>
>> When others run the same kernel with minor config changes
>> using the stable branch ans xserver-kdrive, this phenomena
>> does not happen.
> 
> Check do you have kdrive or xorg with evdev or tslib driver.
> 

I will check, when I am back home.
Will also send the patches I added.

> Regards, 
BR
/Ulf