From: Steffen Sledz <sledz@dresearch.de>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [v4] wvstreams-4.6: Remove dbus support (breaks build)
Date: Wed, 29 Sep 2010 11:15:58 +0200 [thread overview]
Message-ID: <4CA303CE.8050302@dresearch.de> (raw)
In-Reply-To: <1285748455.3876.22.camel@mattotaupa>
Am 29.09.2010 10:20, schrieb Paul Menzel:
> Am Dienstag, den 28.09.2010, 11:34 +0200 schrieb Thilo Fromm:
>> If wvstreams is configured with DBus support enabled (by not providing
>> --without-dbus) the the build fails at link time as libdbus cannot be
>> found:
>>
>> | ./CXX -c dbus/wvdbusconn
>> | ./CXX -c dbus/wvdbusmarshal
>> | ./CXX -c dbus/wvdbusmsg
>> | ./CXX -c dbus/wvdbusserver
>> | linking libwvdbus.so...
>> | arm-angstrom-linux-gnueabi-g++: /libdbus-1.a: No such file or directory
>> | make: *** [libwvdbus.so] Error 1
>> | FATAL: oe_runmake failed
>> NOTE: Task failed: /SCRATCH/maniac/oe-merge-test/OE/tmp.6/work/armv5te-angstrom-linux-gnueabi/wvstreams-4.6-r0/temp/log.do_compile.6422
>> ERROR: TaskFailed event exception, aborting
>> ERROR: Build of /home/maniac/work/HYP/oe/3way_merge/recipes/wvstreams/wvstreams_4.6.bb do_compile failed
>> ERROR: Task 2024 (/home/maniac/work/HYP/oe/3way_merge/recipes/wvstreams/wvstreams_4.6.bb, do_compile) failed
>>
>> The root cause for this behaviour is in wvstreams' configure.ac; the
>> weird dbus detection and library path handling breaks successive builds.
>>
>> This patch, however, does not fix the configure.ac file but disables
>> DBus support for wvstreams at configure time. This at least fixes the
>> broken build.
>>
>> Signed-off-by: Thilo Fromm <t.fromm@dresearch.de>
>
> I build tested your patch with `MACHINE = "beagleboard"` and
> distributions Ȧngström 2008.1 and Minimal with `LIBC = "libc"`.
>
> But it fails for me for Minimal with `LIBC = "eglibc"`
>
> | make[1]: Leaving directory `/oe/build-minimal-uclibc/minimal-uclibc-dev/work/armv7a-oe-linux-uclibceabi/wvstreams-4.6-r1/wvstreams-4.6/argp'
> | ./CXX -c utils/wvbuffer
> | ./CXX -c utils/wvbufferstore
> | ./CXX -c utils/wvcont
> | ./CXX -c utils/wverror
> | ./CXX -c streams/wvfdstream
> | ./CXX -c utils/wvfork
> | ./CXX -c utils/wvhash
> | ./CXX -c utils/wvhashtable
> | ./CXX -c utils/wvlinklist
> | ./CXX -c utils/wvmoniker
> | ./CXX -c utils/wvregex
> | ./CXX -c utils/wvscatterhash
> | ./CXX -c utils/wvsorter
> | ./CXX -c utils/wvattrs
> | ./CXX -c utils/wvstring
> | ./CXX -c utils/wvstringlist
> | ./CXX -c utils/wvstringmask
> | ./CXX -c utils/strutils
> | ./CXX -c utils/wvtask
> | utils/wvtask.cc: In constructor 'WvTaskMan::WvTaskMan()':
> | utils/wvtask.cc:202:5: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc: In static member function 'static int WvTaskMan::run(WvTask&, int)':
> | utils/wvtask.cc:268:5: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc:274:33: error: 'setcontext' was not declared in this scope
> | utils/wvtask.cc: In static member function 'static int WvTaskMan::yield(int)':
> | utils/wvtask.cc:322:5: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc:328:29: error: 'setcontext' was not declared in this scope
> | utils/wvtask.cc: In static member function 'static void WvTaskMan::get_stack(WvTask&, size_t)':
> | utils/wvtask.cc:344:5: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc:374:30: error: 'setcontext' was not declared in this scope
> | utils/wvtask.cc: In static member function 'static void WvTaskMan::_stackmaster()':
> | utils/wvtask.cc:412:9: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc:422:41: error: 'setcontext' was not declared in this scope
> | utils/wvtask.cc: In static member function 'static void WvTaskMan::do_task()':
> | utils/wvtask.cc:477:5: error: 'getcontext' was not declared in this scope
> | utils/wvtask.cc:521:63: error: 'makecontext' was not declared in this scope
> | utils/wvtask.cc:526:52: error: 'setcontext' was not declared in this scope
> | make: *** [utils/wvtask.o] Error 1
> | FATAL: oe_runmake failed
> | ERROR: Function do_compile failed
> NOTE: package wvstreams-4.6-r1: task do_compile: Failed
> ERROR: TaskFailed event exception, aborting
> ERROR: Build of /oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb do_compile failed
> ERROR: Task 11 (/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb, do_compile) failed with 256
> ERROR: '/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb' failed
> ERROR: '/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb' failed
>
> and minimal-uclibc.
>
> | ./CXX -c ipstreams/wvaddr
> | In file included from ipstreams/wvaddr.cc:19:0:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvipraw
> | In file included from ./include/wvipraw.h:10:0,
> | from ipstreams/wvipraw.cc:8:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvlistener
> | In file included from ipstreams/wvlistener.cc:10:0:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvresolver
> | In file included from ./include/wvresolver.h:10:0,
> | from ipstreams/wvresolver.cc:7:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvstreamsdebuggerserver
> | In file included from ./include/wvstreamsdebuggerserver.h:12:0,
> | from ipstreams/wvstreamsdebuggerserver.cc:6:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvtcp
> | In file included from ./include/wvtcplistener.h:11:0,
> | from ipstreams/wvtcp.cc:7:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvudp
> | In file included from ./include/wvudp.h:10:0,
> | from ipstreams/wvudp.cc:8:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ./CXX -c ipstreams/wvunixdgsocket
> | In file included from ./include/wvunixdgsocket.h:13:0,
> | from ipstreams/wvunixdgsocket.cc:1:
> | ./include/wvaddr.h: In member function 'uint32_t WvIPAddr::addr() const':
> | ./include/wvaddr.h:284:31: warning: dereferencing type-punned pointer will break strict-aliasing rules
> | ipstreams/wvunixdgsocket.cc: In constructor 'WvUnixDGSocket::WvUnixDGSocket(const WvFastString&, bool, int)':
> | ipstreams/wvunixdgsocket.cc:50:32: error: 'chmod' was not declared in this scope
> | make: *** [ipstreams/wvunixdgsocket.o] Error 1
> | FATAL: oe_runmake failed
> | ERROR: Function do_compile failed
> NOTE: package wvstreams-4.6-r1: task do_compile: Failed
> ERROR: TaskFailed event exception, aborting
> ERROR: Build of /oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb do_compile failed
> ERROR: Task 12 (/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb, do_compile) failed with 256
> ERROR: '/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb' failed
> ERROR: '/oe/openembedded/recipes/wvstreams/wvstreams_4.6.bb' failed
>
> […]
>
> I am not sure, but your patch is an improvement for GNU Libc based
> distributions and so your patch could as well be commit.
>
> Acked-by: Paul Menzel <paulepanter@users.sourceforge.net>
Acked-by: Steffen Sledz <sledz@dresearch.de>
and applied
--
Steffen Sledz
DResearch Digital Media Systems GmbH
Otto-Schmirgal-Str.3, D-10319 Berlin, Germany
Tel: +49 (30) 515932237 mailto:sledz@DResearch.DE
Fax: +49 (30) 515932299 http://www.DResearch.DE
Geschäftsführer: Dr. Michael Weber, Werner Mögle;
Amtsgericht Berlin Charlottenburg; HRB 54412;
Ust.-IDNr. DE169013825; WEEE Reg.-Nr. DE 85995642
next prev parent reply other threads:[~2010-09-29 9:16 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-28 7:28 [PATCH] Remove dbus support from wvstreams-4.6 because it breaks the build Thilo Fromm
2010-09-28 7:49 ` Paul Menzel
2010-09-28 8:12 ` [v2] wvstreams-4.6: Remove dbus support " Thilo Fromm
2010-09-28 8:33 ` Paul Menzel
2010-09-28 9:08 ` Thilo Fromm
2010-09-28 9:24 ` Thilo Fromm
2010-09-28 9:26 ` Paul Menzel
2010-09-28 9:34 ` [v4] wvstreams-4.6: Remove dbus support (breaks build) Thilo Fromm
2010-09-29 8:20 ` Paul Menzel
2010-09-29 8:52 ` Thilo Fromm
2010-09-29 8:56 ` Paul Menzel
2010-09-29 9:15 ` Steffen Sledz [this message]
2010-09-28 9:37 ` [v2] wvstreams-4.6: Remove dbus support because it breaks the build Thilo Fromm
2010-09-28 11:05 ` Steffen Sledz
2010-09-28 9:21 ` [v3] wvstreams-4.6: Remove dbus support (breaks build) Thilo Fromm
2010-09-28 8:10 ` [PATCH] Remove dbus support from wvstreams-4.6 because it breaks the build Frans Meulenbroeks
2010-09-28 9:10 ` Thilo Fromm
2010-09-28 8:19 ` Holger Freyther
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4CA303CE.8050302@dresearch.de \
--to=sledz@dresearch.de \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox