On 04/29/12 04:40, Khem Raj wrote: > On Fri, Apr 27, 2012 at 5:38 AM, Martin Ertsås wrote: >> Hi. >> >> I'm working on a pandaboard with OMAP4460. Were trying to use the newest >> PVR drivers, which conforms to the result that arose from >> https://wiki.linaro.org/OfficeofCTO/HardFloat/LinkerPathCallApr2012 >> >> We have applied the patch at the bottom of that page gcc, and also a >> patch for making eglibc make ld-linux-armhf, and load ld-linux-armhf >> instead of ld-linux. Problem is, this gives us a kernel panic when it >> tries to run init. Linking ld-linux.so.3 to ld-linux-armhf.so.3 does not >> work, and we're kind of in the dark as to what is missing. >> >> We tried fixing this by renaming the toolchain to be >> arm-none-linux-gnueabihf instead of arm-none-linux-gnueabi, as we heard >> this might be a problem with hardfloats, but this needed a lot of extra >> patches, and some patchwork on other packages like openssl and shadow. >> >> My question is, are there any ongoing plans to fix this, and make sure >> that if we have set hard float we make ld-linux-armhf in openembedded? >> >> For the record we are using eglibc2.15 and gcc4.6 from openembedded-core. > would you show the patches so I can take a look what you did and whats going on Sure, the patches are attached. >> Best regards >> Martin Ertsaas >> >> _______________________________________________ >> Openembedded-devel mailing list >> Openembedded-devel@lists.openembedded.org >> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel > _______________________________________________ > Openembedded-devel mailing list > Openembedded-devel@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel