From: Xufeng Zhang <xufeng.zhang@windriver.com>
To: <openembedded-devel@lists.openembedded.org>,
Joe MacDonald <joe@deserted.net>
Subject: Re: [PATCH meta-networking] quagga: Avoid duplicate connected address adding to the list
Date: Tue, 19 Nov 2013 15:04:42 +0800 [thread overview]
Message-ID: <528B0D8A.2090101@windriver.com> (raw)
In-Reply-To: <1384844550-18276-1-git-send-email-xufeng.zhang@windriver.com>
Hi Joe,
After this fix, we can do nothing to other daemons.
Thanks,
Xufeng
On 11/19/2013 03:02 PM, Xufeng Zhang wrote:
> commit 27ba970b9("quagga/ripd: Fix two bugs after received SIGHUP signal")
> introduces an regression: ifp->connected list is cleaned up when ripd is
> restarting, however, for interface addresses which are not specified in
> ripd configuration file, they are never to be added into ifp->connected
> again, this will lead to some abnormal behavior for route advertising.
>
> Instead of cleaning up the ifp->connected list to avoid duplicated
> connected address being added into this list, we can check this
> condition during interface address adding process and return early
> when an identical address has already been added.
>
> Signed-off-by: Xufeng Zhang<xufeng.zhang@windriver.com>
> ---
> .../quagga-Avoid-duplicate-connected-address.patch | 53 ++++++++++++++++++++
> .../recipes-protocols/quagga/quagga.inc | 3 +-
> 2 files changed, 55 insertions(+), 1 deletions(-)
> create mode 100644 meta-networking/recipes-protocols/quagga/files/quagga-Avoid-duplicate-connected-address.patch
>
> diff --git a/meta-networking/recipes-protocols/quagga/files/quagga-Avoid-duplicate-connected-address.patch b/meta-networking/recipes-protocols/quagga/files/quagga-Avoid-duplicate-connected-address.patch
> new file mode 100644
> index 0000000..585dc29
> --- /dev/null
> +++ b/meta-networking/recipes-protocols/quagga/files/quagga-Avoid-duplicate-connected-address.patch
> @@ -0,0 +1,53 @@
> +quagga: Avoid duplicate connected address adding to the list
> +
> +commit 27ba970b9("quagga/ripd: Fix two bugs after received SIGHUP signal")
> +introduces an regression: ifp->connected list is cleaned up when ripd is
> +restarting, however, for interface addresses which are not specified in
> +ripd configuration file, they are never to be added into ifp->connected
> +again, this will lead to some abnormal behavior for route advertising.
> +
> +Instead of cleaning up the ifp->connected list to avoid duplicated
> +connected address being added into this list, we can check this
> +condition during interface address adding process and return early
> +when an identical address has already been added.
> +
> +Upstream-Status: Pending
> +
> +Signed-off-by: Hu Yadi<Yadi.hu@windriver.com>
> +Signed-off-by: Xufeng Zhang<xufeng.zhang@windriver.com>
> +---
> +--- a/lib/if.c
> ++++ b/lib/if.c
> +@@ -738,6 +738,16 @@
> + struct prefix *destination)
> + {
> + struct connected *ifc;
> ++ struct listnode *cnode;
> ++ struct connected *c;
> ++ int ret = 0;
> ++
> ++ for (ALL_LIST_ELEMENTS_RO (ifp->connected, cnode, c))
> ++ {
> ++ ret = connected_same_prefix (p, (c->address));
> ++ if(ret == 1)
> ++ return NULL;
> ++ }
> +
> + /* Allocate new connected address. */
> + ifc = connected_new ();
> +--- a/ripd/rip_interface.c
> ++++ b/ripd/rip_interface.c
> +@@ -516,13 +516,6 @@
> + thread_cancel (ri->t_wakeup);
> + ri->t_wakeup = NULL;
> + }
> +-
> +- for (conn_node = listhead (ifp->connected); conn_node; conn_node = next)
> +- {
> +- ifc = listgetdata (conn_node);
> +- next = conn_node->next;
> +- listnode_delete (ifp->connected, ifc);
> +- }
> + }
> + }
> +
> diff --git a/meta-networking/recipes-protocols/quagga/quagga.inc b/meta-networking/recipes-protocols/quagga/quagga.inc
> index 2106c9b..21c2028 100644
> --- a/meta-networking/recipes-protocols/quagga/quagga.inc
> +++ b/meta-networking/recipes-protocols/quagga/quagga.inc
> @@ -32,7 +32,8 @@ SRC_URI = "http://download.savannah.gnu.org/releases/quagga${QUAGGASUBDIR}/quagg
> file://watchquagga.init \
> file://watchquagga.default \
> file://volatiles.03_quagga \
> - file://ripd-fix-two-bugs-after-received-SIGHUP.patch"
> + file://ripd-fix-two-bugs-after-received-SIGHUP.patch \
> + file://quagga-Avoid-duplicate-connected-address.patch"
>
> PACKAGECONFIG ??= ""
> PACKAGECONFIG[cap] = "--enable-capabilities,--disable-capabilities,libcap"
>
next prev parent reply other threads:[~2013-11-19 7:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-19 7:02 [PATCH meta-networking] quagga: Avoid duplicate connected address adding to the list Xufeng Zhang
2013-11-19 7:04 ` Xufeng Zhang [this message]
2013-11-26 14:51 ` Joe MacDonald
2013-11-27 2:14 ` Xufeng Zhang
2013-11-27 20:19 ` Joe MacDonald
2013-11-26 16:24 ` Joe MacDonald
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=528B0D8A.2090101@windriver.com \
--to=xufeng.zhang@windriver.com \
--cc=joe@deserted.net \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox