From: Rongqing Li <rongqing.li@windriver.com>
To: <openembedded-devel@lists.openembedded.org>
Subject: Re: [PATCH][v2] squid: upgrade to 3.5.5
Date: Tue, 7 Jul 2015 08:47:52 +0800 [thread overview]
Message-ID: <559B21B8.1020300@windriver.com> (raw)
In-Reply-To: <CANBf+V2=eO4XoktBeG5fmniNoDMosLKfeXboN71eYW0SUhM8-w@mail.gmail.com>
On 2015年07月07日 03:26, Joe MacDonald wrote:
> Looks okay, but there's this in Martin's logs:
>
> squid-3.5.5: squid rdepends on libpam, but it isn't a build
> dependency? [build-deps]
>
> Can you update the recipe for that?
>
Ok, I will see it
-Roy
> -J.
>
> On Tue, Jun 16, 2015 at 11:03 PM, <rongqing.li@windriver.com> wrote:
>> From: Roy Li <rongqing.li@windriver.com>
>>
>> 1. Remove the squid-change-ksh-referen*.patch which is not needed, since
>> 3.5.5 did not use ksh by default.
>> 2. Update the checksum of COPYING,since the date in it has been changed.
>> 3. Define BUILDCXXFLAGS, otherwise the target gcc options -std=c++11 will
>> add into it, and lead to building failure since host gcc maybe not
>> support "-std=c++11"
>> 4. Assume to support GNU atomic operations by default, the running check
>> on cross-compile setup does not work
>>
>> Signed-off-by: Roy Li <rongqing.li@windriver.com>
>> ---
>> ...ge-ksh-reference-in-krb-ldap-helper-to-sh.patch | 39 ----------------------
>> .../squid/{squid_3.4.7.bb => squid_3.5.5.bb} | 9 ++---
>> 2 files changed, 5 insertions(+), 43 deletions(-)
>> delete mode 100644 meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> rename meta-networking/recipes-daemons/squid/{squid_3.4.7.bb => squid_3.5.5.bb} (88%)
>>
>> diff --git a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch b/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> deleted file mode 100644
>> index 8e03860..0000000
>> --- a/meta-networking/recipes-daemons/squid/files/squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch
>> +++ /dev/null
>> @@ -1,39 +0,0 @@
>> -squid: change ksh reference in krb ldap helper to sh
>> -
>> -Very simple cert_tool script with no ksh specifics.
>> -Change it to use sh so a package dependency doesn't
>> -get created to ksh.
>> -
>> -Upstream-Status: Pending
>> -
>> -Signed-off-by: Jim Somerville <Jim.Somerville@windriver.com>
>> -Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
>> ----
>> - helpers/external_acl/kerberos_ldap_group/cert_tool | 6 +++---
>> - 1 file changed, 3 insertions(+), 3 deletions(-)
>> -
>> -diff --git a/helpers/external_acl/kerberos_ldap_group/cert_tool b/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -index 9f14959..8c4ea11 100644
>> ---- a/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -+++ b/helpers/external_acl/kerberos_ldap_group/cert_tool
>> -@@ -1,4 +1,4 @@
>> --#!/bin/ksh
>> -+#!/bin/sh
>> - #
>> - # -----------------------------------------------------------------------------
>> - #
>> -@@ -64,9 +64,9 @@ QUIT
>> - # Create database for Sun ldap and pem file for Openldap
>> - #
>> - rm ${server}_[0-9]*.pem 2>/dev/null
>> --let i=0
>> -+i=0
>> - ls ${server}_[0-9]*.cert | while read file; do
>> -- let i=i+1
>> -+ i=`expr $i + 1`
>> - cat $file >> ${server}_$i.pem
>> - CA=`openssl x509 -noout -text -in ${server}_$i.pem | grep -i "CA:.*true"`
>> - if [ -n "$CA" ]; then
>> ---
>> -1.9.1
>> -
>> diff --git a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> similarity index 88%
>> rename from meta-networking/recipes-daemons/squid/squid_3.4.7.bb
>> rename to meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> index 7b00dfc..ac18e0f 100644
>> --- a/meta-networking/recipes-daemons/squid/squid_3.4.7.bb
>> +++ b/meta-networking/recipes-daemons/squid/squid_3.5.5.bb
>> @@ -16,17 +16,16 @@ SRC_URI = "http://www.squid-cache.org/Versions/v${MAJ_VER}/${MIN_VER}/${BPN}-${P
>> file://Set-up-for-cross-compilation.patch \
>> file://Skip-AC_RUN_IFELSE-tests.patch \
>> file://Fix-flawed-dynamic-ldb-link-test-in-configure.patch \
>> - file://squid-change-ksh-reference-in-krb-ldap-helper-to-sh.patch \
>> file://squid-use-serial-tests-config-needed-by-ptest.patch \
>> file://run-ptest \
>> file://volatiles.03_squid \
>> "
>>
>> LIC_FILES_CHKSUM = "file://COPYING;md5=c492e2d6d32ec5c1aad0e0609a141ce9 \
>> - file://COPYRIGHT;md5=2900f50789c498be8e9f1eb23b55cbe9 \
>> + file://errors/COPYRIGHT;md5=0fed8f1462f6fdbc62bb431bcb618f46 \
>> "
>> -SRC_URI[md5sum] = "9951034b10f7ee0f45a95cfae61c57c2"
>> -SRC_URI[sha256sum] = "7b423f3d3495a317503ca559ea535f80445fd7c4e3c3e268cb7a8c97c61af2b6"
>> +SRC_URI[md5sum] = "6aac5c2e9cbbeabcbf2e9e49a178a931"
>> +SRC_URI[sha256sum] = "741c24a307c50f0d845d53cabb66b36d91ce9a73c8a165eae5def5e4d11e6a0d"
>>
>> DEPENDS = "libtool krb5 openldap db cyrus-sasl"
>>
>> @@ -38,6 +37,8 @@ USERADD_PARAM_${PN} = "--system --no-create-home --home-dir /var/run/squid --she
>> PACKAGECONFIG ??= ""
>> PACKAGECONFIG[libnetfilter-conntrack] = "--with-netfilter-conntrack=${includedir}, --without-netfilter-conntrack, libnetfilter-conntrack"
>> EXTRA_OECONF += "--with-default-user=squid"
>> +export BUILDCXXFLAGS="${BUILD_CXXFLAGS}"
>> +CACHED_CONFIGUREVARS += "squid_cv_gnu_atomics=yes"
>>
>> TESTDIR = "test-suite"
>> do_compile_ptest() {
>> --
>> 1.9.1
>>
>> --
>> _______________________________________________
>> Openembedded-devel mailing list
>> Openembedded-devel@lists.openembedded.org
>> http://lists.openembedded.org/mailman/listinfo/openembedded-devel
>
>
>
--
Best Reagrds,
Roy | RongQing Li
prev parent reply other threads:[~2015-07-07 0:47 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-17 3:03 [PATCH][v2] squid: upgrade to 3.5.5 rongqing.li
2015-07-06 19:26 ` Joe MacDonald
2015-07-07 0:47 ` Rongqing Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=559B21B8.1020300@windriver.com \
--to=rongqing.li@windriver.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox