From: Anup Patel <apatel@ventanamicro.com>
To: opensbi@lists.infradead.org
Subject: [PATCH 04/11] lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features
Date: Fri, 29 Apr 2022 21:21:44 +0530 [thread overview]
Message-ID: <20220429155151.314788-5-apatel@ventanamicro.com> (raw)
In-Reply-To: <20220429155151.314788-1-apatel@ventanamicro.com>
If a hart implements privileged spec v1.10 (or higher) then we can
safely assume that [m|s]counteren CSR are present and we don't need
MCOUNTEREN and SCOUNTEREN as hart features.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
include/sbi/sbi_hart.h | 18 +++++++-----------
lib/sbi/sbi_emulate_csr.c | 4 ++--
lib/sbi/sbi_hart.c | 29 +++++------------------------
lib/sbi/sbi_pmu.c | 3 ++-
4 files changed, 16 insertions(+), 38 deletions(-)
diff --git a/include/sbi/sbi_hart.h b/include/sbi/sbi_hart.h
index 3c37933..4665a62 100644
--- a/include/sbi/sbi_hart.h
+++ b/include/sbi/sbi_hart.h
@@ -26,24 +26,20 @@ enum sbi_hart_priv_versions {
/** Possible feature flags of a hart */
enum sbi_hart_features {
- /** Hart has S-mode counter enable */
- SBI_HART_HAS_SCOUNTEREN = (1 << 0),
- /** Hart has M-mode counter enable */
- SBI_HART_HAS_MCOUNTEREN = (1 << 1),
/** Hart has counter inhibit CSR */
- SBI_HART_HAS_MCOUNTINHIBIT = (1 << 2),
+ SBI_HART_HAS_MCOUNTINHIBIT = (1 << 0),
/** Hart has sscofpmf extension */
- SBI_HART_HAS_SSCOFPMF = (1 << 3),
+ SBI_HART_HAS_SSCOFPMF = (1 << 1),
/** HART has timer csr implementation in hardware */
- SBI_HART_HAS_TIME = (1 << 4),
+ SBI_HART_HAS_TIME = (1 << 2),
/** HART has AIA local interrupt CSRs */
- SBI_HART_HAS_AIA = (1 << 5),
+ SBI_HART_HAS_AIA = (1 << 3),
/** HART has menvcfg CSR */
- SBI_HART_HAS_MENVCFG = (1 << 6),
+ SBI_HART_HAS_MENVCFG = (1 << 4),
/** HART has mstateen CSR **/
- SBI_HART_HAS_SMSTATEEN = (1 << 7),
+ SBI_HART_HAS_SMSTATEEN = (1 << 5),
/** HART has SSTC extension implemented in hardware */
- SBI_HART_HAS_SSTC = (1 << 8),
+ SBI_HART_HAS_SSTC = (1 << 6),
/** Last index of Hart features*/
SBI_HART_HAS_LAST_FEATURE = SBI_HART_HAS_SSTC,
diff --git a/lib/sbi/sbi_emulate_csr.c b/lib/sbi/sbi_emulate_csr.c
index dbb1755..aec9d3c 100644
--- a/lib/sbi/sbi_emulate_csr.c
+++ b/lib/sbi/sbi_emulate_csr.c
@@ -24,7 +24,7 @@ static bool hpm_allowed(int hpm_num, ulong prev_mode, bool virt)
struct sbi_scratch *scratch = sbi_scratch_thishart_ptr();
if (prev_mode <= PRV_S) {
- if (sbi_hart_has_feature(scratch, SBI_HART_HAS_MCOUNTEREN)) {
+ if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10) {
cen &= csr_read(CSR_MCOUNTEREN);
if (virt)
cen &= csr_read(CSR_HCOUNTEREN);
@@ -33,7 +33,7 @@ static bool hpm_allowed(int hpm_num, ulong prev_mode, bool virt)
}
}
if (prev_mode == PRV_U) {
- if (sbi_hart_has_feature(scratch, SBI_HART_HAS_SCOUNTEREN))
+ if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10)
cen &= csr_read(CSR_SCOUNTEREN);
else
cen = 0;
diff --git a/lib/sbi/sbi_hart.c b/lib/sbi/sbi_hart.c
index ed4e631..ed8a061 100644
--- a/lib/sbi/sbi_hart.c
+++ b/lib/sbi/sbi_hart.c
@@ -58,7 +58,7 @@ static void mstatus_init(struct sbi_scratch *scratch)
/* Disable user mode usage of all perf counters except default ones (CY, TM, IR) */
if (misa_extension('S') &&
- sbi_hart_has_feature(scratch, SBI_HART_HAS_SCOUNTEREN))
+ sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10)
csr_write(CSR_SCOUNTEREN, 7);
/**
@@ -66,7 +66,7 @@ static void mstatus_init(struct sbi_scratch *scratch)
* Supervisor mode usage for all counters are enabled by default
* But counters will not run until mcountinhibit is set.
*/
- if (sbi_hart_has_feature(scratch, SBI_HART_HAS_MCOUNTEREN))
+ if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10)
csr_write(CSR_MCOUNTEREN, -1);
/* All programmable counters will start running at runtime after S-mode request */
@@ -402,12 +402,6 @@ static inline char *sbi_hart_feature_id2string(unsigned long feature)
return NULL;
switch (feature) {
- case SBI_HART_HAS_SCOUNTEREN:
- fstr = "scounteren";
- break;
- case SBI_HART_HAS_MCOUNTEREN:
- fstr = "mcounteren";
- break;
case SBI_HART_HAS_MCOUNTINHIBIT:
fstr = "mcountinhibit";
break;
@@ -614,23 +608,10 @@ __mhpm_skip:
#undef __check_csr_2
#undef __check_csr
- /* Detect if hart supports SCOUNTEREN feature */
- val = csr_read_allowed(CSR_SCOUNTEREN, (unsigned long)&trap);
- if (!trap.cause) {
- hfeatures->priv_version = SBI_HART_PRIV_VER_1_10;
- csr_write_allowed(CSR_SCOUNTEREN, (unsigned long)&trap, val);
- if (!trap.cause)
- hfeatures->features |= SBI_HART_HAS_SCOUNTEREN;
- }
-
- /* Detect if hart supports MCOUNTEREN feature */
+ /* Detect if hart supports Priv v1.10 */
val = csr_read_allowed(CSR_MCOUNTEREN, (unsigned long)&trap);
- if (!trap.cause) {
+ if (!trap.cause)
hfeatures->priv_version = SBI_HART_PRIV_VER_1_10;
- csr_write_allowed(CSR_MCOUNTEREN, (unsigned long)&trap, val);
- if (!trap.cause)
- hfeatures->features |= SBI_HART_HAS_MCOUNTEREN;
- }
/* Detect if hart supports MCOUNTINHIBIT feature */
val = csr_read_allowed(CSR_MCOUNTINHIBIT, (unsigned long)&trap);
@@ -651,7 +632,7 @@ __mhpm_skip:
/* Counter overflow/filtering is not useful without mcounter/inhibit */
if (hfeatures->features & SBI_HART_HAS_MCOUNTINHIBIT &&
- hfeatures->features & SBI_HART_HAS_MCOUNTEREN) {
+ hfeatures->priv_version >= SBI_HART_PRIV_VER_1_12) {
/* Detect if hart supports sscofpmf */
csr_read_allowed(CSR_SCOUNTOVF, (unsigned long)&trap);
if (!trap.cause)
diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 7ea0ca5..853229e 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -729,7 +729,8 @@ void sbi_pmu_exit(struct sbi_scratch *scratch)
if (sbi_hart_has_feature(scratch, SBI_HART_HAS_MCOUNTINHIBIT))
csr_write(CSR_MCOUNTINHIBIT, 0xFFFFFFF8);
- csr_write(CSR_MCOUNTEREN, -1);
+ if (sbi_hart_priv_version(scratch) >= SBI_HART_PRIV_VER_1_10)
+ csr_write(CSR_MCOUNTEREN, -1);
pmu_reset_event_map(hartid);
}
--
2.34.1
next prev parent reply other threads:[~2022-04-29 15:51 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-29 15:51 [PATCH 00/11] HART Feature Improvements Anup Patel
2022-04-29 15:51 ` [PATCH 01/11] lib: sbi: Detect and print privileged spec version Anup Patel
2022-05-04 1:42 ` Atish Patra
2022-05-07 4:57 ` Anup Patel
2022-04-29 15:51 ` [PATCH 02/11] lib: sbi: Remove 's' and 'u' from misa_string() output Anup Patel
2022-05-04 1:42 ` Atish Patra
2022-05-07 4:58 ` Anup Patel
2022-04-29 15:51 ` [PATCH 03/11] lib: sbi: Update the name of ISA string printed at boot time Anup Patel
2022-05-04 1:55 ` Atish Patra
2022-05-07 4:59 ` Anup Patel
2022-04-29 15:51 ` Anup Patel [this message]
2022-05-04 1:51 ` [PATCH 04/11] lib: sbi: Remove MCOUNTEREN and SCOUNTEREN hart features Atish Patra
2022-05-04 1:55 ` Atish Patra
2022-05-07 5:00 ` Anup Patel
2022-04-29 15:51 ` [PATCH 05/11] lib: sbi: Remove MCOUNTINHIBT hart feature Anup Patel
2022-05-04 1:56 ` Atish Patra
2022-05-07 5:00 ` Anup Patel
2022-04-29 15:51 ` [PATCH 06/11] lib: sbi: Remove MENVCFG " Anup Patel
2022-05-04 1:57 ` Atish Patra
2022-05-07 5:03 ` Anup Patel
2022-04-29 15:51 ` [PATCH 07/11] lib: sbi: Fix AIA feature detection Anup Patel
2022-05-04 1:57 ` Atish Patra
2022-05-07 5:03 ` Anup Patel
2022-04-29 15:51 ` [PATCH 08/11] lib: sbi: Convert hart features into hart extensions Anup Patel
2022-05-04 2:00 ` Atish Patra
2022-05-07 5:04 ` Anup Patel
2022-04-29 15:51 ` [PATCH 09/11] lib: sbi: Detect hart features only once for each hart Anup Patel
2022-05-04 2:01 ` Atish Patra
2022-05-07 5:04 ` Anup Patel
2022-04-29 15:51 ` [PATCH 10/11] lib: sbi: Add sbi_hart_update_extension() function Anup Patel
2022-05-04 2:02 ` Atish Patra
2022-05-07 5:04 ` Anup Patel
2022-04-29 15:51 ` [PATCH 11/11] lib: sbi_platform: Add callback to populate HART extensions Anup Patel
2022-05-04 2:05 ` Atish Patra
2022-05-07 5:05 ` Anup Patel
2022-05-05 16:30 ` [PATCH 00/11] HART Feature Improvements Xiang W
2022-05-06 3:21 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220429155151.314788-5-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=opensbi@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox