From: Anup Patel <apatel@ventanamicro.com>
To: opensbi@lists.infradead.org
Subject: [PATCH 2/7] lib: sbi_pmu: Replace sbi_pmu_ctr_read() with sbi_pmu_ctr_fw_read()
Date: Thu, 25 Aug 2022 10:21:39 +0530 [thread overview]
Message-ID: <20220825045144.752619-3-apatel@ventanamicro.com> (raw)
In-Reply-To: <20220825045144.752619-1-apatel@ventanamicro.com>
The "read a firmware counter" SBI call should only work for firmware
counters so let us replace sbi_pmu_ctr_read() with sbi_pmu_ctr_fw_read()
which works only on firmware counters.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
include/sbi/sbi_pmu.h | 2 +-
lib/sbi/sbi_ecall_pmu.c | 3 ++-
lib/sbi/sbi_pmu.c | 45 +++++++----------------------------------
3 files changed, 10 insertions(+), 40 deletions(-)
diff --git a/include/sbi/sbi_pmu.h b/include/sbi/sbi_pmu.h
index f5e3dbd..34336f7 100644
--- a/include/sbi/sbi_pmu.h
+++ b/include/sbi/sbi_pmu.h
@@ -53,7 +53,7 @@ int sbi_pmu_add_hw_event_counter_map(u32 eidx_start, u32 eidx_end, u32 cmap);
int sbi_pmu_add_raw_event_counter_map(uint64_t select, uint64_t select_mask, u32 cmap);
-int sbi_pmu_ctr_read(uint32_t cidx, unsigned long *cval);
+int sbi_pmu_ctr_fw_read(uint32_t cidx, uint64_t *cval);
int sbi_pmu_ctr_stop(unsigned long cidx_base, unsigned long cidx_mask,
unsigned long flag);
diff --git a/lib/sbi/sbi_ecall_pmu.c b/lib/sbi/sbi_ecall_pmu.c
index 9ee9e81..826c8a8 100644
--- a/lib/sbi/sbi_ecall_pmu.c
+++ b/lib/sbi/sbi_ecall_pmu.c
@@ -51,7 +51,8 @@ static int sbi_ecall_pmu_handler(unsigned long extid, unsigned long funcid,
break;
case SBI_EXT_PMU_COUNTER_FW_READ:
- ret = sbi_pmu_ctr_read(regs->a0, out_val);
+ ret = sbi_pmu_ctr_fw_read(regs->a0, &temp);
+ *out_val = temp;
break;
case SBI_EXT_PMU_COUNTER_START:
diff --git a/lib/sbi/sbi_pmu.c b/lib/sbi/sbi_pmu.c
index 535e5cc..250808e 100644
--- a/lib/sbi/sbi_pmu.c
+++ b/lib/sbi/sbi_pmu.c
@@ -167,50 +167,19 @@ static int pmu_ctr_validate(uint32_t cidx, uint32_t *event_idx_code)
return event_idx_type;
}
-static int pmu_ctr_read_fw(uint32_t cidx, unsigned long *cval,
- uint32_t fw_evt_code)
-{
- u32 hartid = current_hartid();
- struct sbi_pmu_fw_event fevent;
-
- fevent = fw_event_map[hartid][fw_evt_code];
- *cval = fevent.curr_count;
-
- return 0;
-}
-
-/* Add a hardware counter read for completeness for future purpose */
-static int pmu_ctr_read_hw(uint32_t cidx, uint64_t *cval)
-{
- /* Check for invalid hw counter read requests */
- if (unlikely(cidx == 1))
- return SBI_EINVAL;
-#if __riscv_xlen == 32
- uint32_t temp, temph = 0;
-
- temp = csr_read_num(CSR_MCYCLE + cidx);
- temph = csr_read_num(CSR_MCYCLEH + cidx);
- *cval = ((uint64_t)temph << 32) | temp;
-#else
- *cval = csr_read_num(CSR_MCYCLE + cidx);
-#endif
-
- return 0;
-}
-
-int sbi_pmu_ctr_read(uint32_t cidx, unsigned long *cval)
+int sbi_pmu_ctr_fw_read(uint32_t cidx, uint64_t *cval)
{
int event_idx_type;
uint32_t event_code;
- uint64_t cval64;
+ u32 hartid = current_hartid();
+ struct sbi_pmu_fw_event *fevent;
event_idx_type = pmu_ctr_validate(cidx, &event_code);
- if (event_idx_type < 0)
+ if (event_idx_type != SBI_PMU_EVENT_TYPE_FW)
return SBI_EINVAL;
- else if (event_idx_type == SBI_PMU_EVENT_TYPE_FW)
- pmu_ctr_read_fw(cidx, cval, event_code);
- else
- pmu_ctr_read_hw(cidx, &cval64);
+
+ fevent = &fw_event_map[hartid][event_code];
+ *cval = fevent->curr_count;
return 0;
}
--
2.34.1
next prev parent reply other threads:[~2022-08-25 4:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-25 4:51 [PATCH 0/7] OpenSBI PMU improvements Anup Patel
2022-08-25 4:51 ` [PATCH 1/7] lib: sbi_pmu: Remove "event_idx" member from struct sbi_pmu_fw_event Anup Patel
2022-08-25 4:51 ` Anup Patel [this message]
2022-08-25 4:51 ` [PATCH 3/7] lib: sbi_pmu: Firmware counters are always 64 bits wide Anup Patel
2022-08-25 4:51 ` [PATCH 4/7] lib: sbi_pmu: Simplify FW counters to reduce memory usage Anup Patel
2022-08-25 4:51 ` [PATCH 5/7] lib: sbi_pmu: Add custom PMU device operations Anup Patel
2022-08-25 8:05 ` Andrew Jones
2022-08-25 4:51 ` [PATCH 6/7] lib: sbi: Print platform PMU device at boot-time Anup Patel
[not found] ` <CAOnJCUL2kD_8dbwyBOX1XbaGizUqRAymPUhRWddavtG=aLojMA@mail.gmail.com>
2022-09-01 11:29 ` Anup Patel
2022-08-25 4:51 ` [PATCH 7/7] include: sbi: Reduce includes in sbi_pmu.h Anup Patel
2022-09-01 11:30 ` [PATCH 0/7] OpenSBI PMU improvements Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220825045144.752619-3-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=opensbi@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox