From: Anup Patel <apatel@ventanamicro.com>
To: opensbi@lists.infradead.org
Subject: [PATCH 6/6] lib: sbi: Introduce an early console buffer for caching early prints
Date: Fri, 5 Jul 2024 12:45:04 +0530 [thread overview]
Message-ID: <20240705071504.50988-7-apatel@ventanamicro.com> (raw)
In-Reply-To: <20240705071504.50988-1-apatel@ventanamicro.com>
The console device is registered by platform only in early_init()
callback so any prints before this point will be lost. Introduce an
early console buffer for caching prints before platform early_init().
For crashes before platform early_init(), users can simply dump the
contents of the console_early_buffer[] string using a debugger. The
relative address of the console_early_buffer[] string can be found
using following two commands:
CONSOLE_EARLY_FIFO_ADDR=`${CROSS_COMPILE}objdump -D \
build/platform/generic/firmware/fw_dynamic.elf | \
grep "<console_early_fifo>:" | awk '{print $1}'`
${CROSS_COMPILE}objdump -R build/platform/generic/firmware/fw_dynamic.elf | \
grep $CONSOLE_EARLY_FIFO_ADDR | awk '{print $3}'
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
lib/sbi/Kconfig | 6 +++++-
lib/sbi/sbi_console.c | 27 +++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 1 deletion(-)
diff --git a/lib/sbi/Kconfig b/lib/sbi/Kconfig
index 6cf54ce..bd8ba2b 100644
--- a/lib/sbi/Kconfig
+++ b/lib/sbi/Kconfig
@@ -1,6 +1,10 @@
# SPDX-License-Identifier: BSD-2-Clause
-menu "SBI Extension Support"
+menu "Generic SBI Support"
+
+config CONSOLE_EARLY_BUFFER_SIZE
+ int "Early console buffer size (bytes)"
+ default 256
config SBI_ECALL_TIME
bool "Timer extension"
diff --git a/lib/sbi/sbi_console.c b/lib/sbi/sbi_console.c
index 194529d..d760885 100644
--- a/lib/sbi/sbi_console.c
+++ b/lib/sbi/sbi_console.c
@@ -9,6 +9,7 @@
#include <sbi/riscv_locks.h>
#include <sbi/sbi_console.h>
+#include <sbi/sbi_fifo.h>
#include <sbi/sbi_hart.h>
#include <sbi/sbi_platform.h>
#include <sbi/sbi_scratch.h>
@@ -21,6 +22,15 @@ static char console_tbuf[CONSOLE_TBUF_MAX];
static u32 console_tbuf_len;
static spinlock_t console_out_lock = SPIN_LOCK_INITIALIZER;
+#ifdef CONFIG_CONSOLE_EARLY_BUFFER_SIZE
+#define CONSOLE_EARLY_BUFFER_SIZE CONFIG_CONSOLE_EARLY_BUFFER_SIZE
+#else
+#define CONSOLE_EARLY_BUFFER_SIZE 256
+#endif
+static char console_early_buffer[CONSOLE_EARLY_BUFFER_SIZE] = { 0 };
+static SBI_FIFO_DEFINE(console_early_fifo, console_early_buffer, \
+ CONSOLE_EARLY_BUFFER_SIZE, sizeof(char));
+
bool sbi_isprintable(char c)
{
if (((31 < c) && (c < 127)) || (c == '\f') || (c == '\r') ||
@@ -39,6 +49,7 @@ int sbi_getc(void)
static unsigned long nputs(const char *str, unsigned long len)
{
+ char ch;
unsigned long i;
if (console_dev) {
@@ -51,6 +62,11 @@ static unsigned long nputs(const char *str, unsigned long len)
console_dev->console_putc(str[i]);
}
}
+ } else {
+ for (i = 0; i < len; i++) {
+ ch = str[i];
+ sbi_fifo_enqueue(&console_early_fifo, &ch, true);
+ }
}
return len;
}
@@ -472,8 +488,19 @@ const struct sbi_console_device *sbi_console_get_device(void)
void sbi_console_set_device(const struct sbi_console_device *dev)
{
+ char ch;
+ bool flush_early_fifo = false;
+
if (!dev)
return;
+ if (!console_dev)
+ flush_early_fifo = true;
+
console_dev = dev;
+
+ if (flush_early_fifo) {
+ while (!sbi_fifo_dequeue(&console_early_fifo, &ch))
+ sbi_putc(ch);
+ }
}
--
2.34.1
next prev parent reply other threads:[~2024-07-05 7:15 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-05 7:14 [PATCH 0/6] Early console buffer for OpenSBI Anup Patel
2024-07-05 7:14 ` [PATCH 1/6] platform: Setup serial console device in early_init() Anup Patel
2024-07-24 5:40 ` Himanshu Chauhan
2024-07-05 7:15 ` [PATCH 2/6] lib: sbi: Remove sbi_console_init() and console_init() platform callback Anup Patel
2024-07-24 5:40 ` Himanshu Chauhan
2024-07-05 7:15 ` [PATCH 3/6] lib: sbi: Optimize fifo enqueue/dequeue for basic data types Anup Patel
2024-07-24 5:37 ` Himanshu Chauhan
2024-07-05 7:15 ` [PATCH 4/6] lib: sbi: Allow forceful queueing of data in sbi_fifo_enqueue() Anup Patel
2024-07-24 5:38 ` Himanshu Chauhan
2024-07-05 7:15 ` [PATCH 5/6] include: sbi: Add macros to create FIFO as local or global variable Anup Patel
2024-07-24 5:38 ` Himanshu Chauhan
2024-07-05 7:15 ` Anup Patel [this message]
2024-07-24 5:39 ` [PATCH 6/6] lib: sbi: Introduce an early console buffer for caching early prints Himanshu Chauhan
2024-07-08 16:48 ` [PATCH 0/6] Early console buffer for OpenSBI Xiang W
2024-07-09 3:43 ` Anup Patel
2024-07-24 6:50 ` Anup Patel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240705071504.50988-7-apatel@ventanamicro.com \
--to=apatel@ventanamicro.com \
--cc=opensbi@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox