From: Mattia Dongili <malattia@linux.it>
To: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org,
Marco Chiappero <marco@absence.it>,
Mattia Dongili <malattia@linux.it>
Subject: [PATCH 05/19] sony-laptop: improve SNC initialization and acpi notify callback code
Date: Sat, 19 May 2012 22:35:48 +0900 [thread overview]
Message-ID: <1337434562-12283-6-git-send-email-malattia@linux.it> (raw)
In-Reply-To: <1337434562-12283-1-git-send-email-malattia@linux.it>
From: Marco Chiappero <marco@absence.it>
Loop through the list of SNC handles and run the proper initialization
function for each of the known handles. Also return void in function
where we are not checking the return value anyway.
For notifications we also know which handle is linked to the event and
the code becomes simpler to read with a switch rather than using
convoluted ifs.
[malattia@linux.it: Code reworked to merge the initialization code
improvements and the notify callback changes. Modified the code paths to
allow easier error exit paths. Also fixed some missing break statements
and spelling mistakes.]
Signed-off-by: Marco Chiappero <marco@absence.it>
Signed-off-by: Mattia Dongili <malattia@linux.it>
---
drivers/platform/x86/sony-laptop.c | 319 ++++++++++++++++++++++++++----------
1 file changed, 233 insertions(+), 86 deletions(-)
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index d6c53c6..4420353 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -141,6 +141,8 @@ MODULE_PARM_DESC(kbd_backlight_timeout,
"(default: 0)");
static void sony_nc_kbd_backlight_resume(void);
+static void sony_nc_kbd_backlight_setup(struct platform_device *pd);
+static int sony_nc_kbd_backlight_cleanup(struct platform_device *pd);
enum sony_nc_rfkill {
SONY_WIFI,
@@ -153,6 +155,8 @@ enum sony_nc_rfkill {
static int sony_rfkill_handle;
static struct rfkill *sony_rfkill_devices[N_SONY_RFKILL];
static int sony_rfkill_address[N_SONY_RFKILL] = {0x300, 0x500, 0x700, 0x900};
+static void sony_nc_rfkill_setup(struct acpi_device *device);
+static void sony_nc_rfkill_cleanup(void);
static void sony_nc_rfkill_update(void);
/*********** Input Devices ***********/
@@ -1103,63 +1107,116 @@ static struct sony_nc_event sony_127_events[] = {
{ 0, 0 },
};
+static int sony_nc_hotkeys_decode(u32 event, unsigned int handle)
+{
+ int ret = -EINVAL;
+ unsigned int result = 0;
+ struct sony_nc_event *key_event;
+
+ if (sony_call_snc_handle(handle, 0x200, &result)) {
+ dprintk("Unable to decode event 0x%.2x 0x%.2x\n", handle,
+ event);
+ return -EINVAL;
+ }
+
+ result &= 0xFF;
+
+ if (handle == 0x0100)
+ key_event = sony_100_events;
+ else
+ key_event = sony_127_events;
+
+ for (; key_event->data; key_event++) {
+ if (key_event->data == result) {
+ ret = key_event->event;
+ break;
+ }
+ }
+
+ if (!key_event->data)
+ pr_info("Unknown hotkey 0x%.2x/0x%.2x (handle 0x%.2x)\n",
+ event, result, handle);
+
+ return ret;
+}
+
/*
* ACPI callbacks
*/
static void sony_nc_notify(struct acpi_device *device, u32 event)
{
- u32 ev = event;
+ u32 real_ev = event;
+ u8 ev_type = 0;
+ dprintk("sony_nc_notify, event: 0x%.2x\n", event);
- if (ev >= 0x90) {
- /* New-style event */
- int result;
- int key_handle = 0;
- ev -= 0x90;
-
- if (sony_find_snc_handle(0x100) == ev)
- key_handle = 0x100;
- if (sony_find_snc_handle(0x127) == ev)
- key_handle = 0x127;
-
- if (key_handle) {
- struct sony_nc_event *key_event;
-
- if (sony_call_snc_handle(key_handle, 0x200, &result)) {
- dprintk("sony_nc_notify, unable to decode"
- " event 0x%.2x 0x%.2x\n", key_handle,
- ev);
- /* restore the original event */
- ev = event;
- } else {
- ev = result & 0xFF;
-
- if (key_handle == 0x100)
- key_event = sony_100_events;
- else
- key_event = sony_127_events;
-
- for (; key_event->data; key_event++) {
- if (key_event->data == ev) {
- ev = key_event->event;
- break;
- }
- }
+ if (event >= 0x90) {
+ unsigned int result = 0;
+ unsigned int arg = 0;
+ unsigned int handle = 0;
+ unsigned int offset = event - 0x90;
- if (!key_event->data)
- pr_info("Unknown event: 0x%x 0x%x\n",
- key_handle, ev);
- else
- sony_laptop_report_input_event(ev);
- }
- } else if (sony_find_snc_handle(sony_rfkill_handle) == ev) {
- sony_nc_rfkill_update();
+ if (offset >= ARRAY_SIZE(handles->cap)) {
+ pr_err("Event 0x%x outside of capabilities list\n",
+ event);
return;
}
- } else
- sony_laptop_report_input_event(ev);
+ handle = handles->cap[offset];
+
+ /* list of handles known for generating events */
+ switch (handle) {
+ /* hotkey event */
+ case 0x0100:
+ case 0x0127:
+ ev_type = 1;
+ real_ev = sony_nc_hotkeys_decode(event, handle);
+
+ if (real_ev > 0)
+ sony_laptop_report_input_event(real_ev);
+ else
+ /* restore the original event for reporting */
+ real_ev = event;
+
+ break;
+
+ /* wlan switch */
+ case 0x0124:
+ case 0x0135:
+ /* events on this handle are reported when the
+ * switch changes position or for battery
+ * events. We'll notify both of them but only
+ * update the rfkill device status when the
+ * switch is moved.
+ */
+ ev_type = 2;
+ sony_call_snc_handle(handle, 0x0100, &result);
+ real_ev = result & 0x03;
+
+ /* hw switch event */
+ if (real_ev == 1)
+ sony_nc_rfkill_update();
+
+ break;
+
+ default:
+ dprintk("Unknown event 0x%x for handle 0x%x\n",
+ event, handle);
+ break;
+ }
- dprintk("sony_nc_notify, event: 0x%.2x\n", ev);
- acpi_bus_generate_proc_event(sony_nc_acpi_device, 1, ev);
+ /* clear the event (and the event reason when present) */
+ arg = 1 << offset;
+ sony_nc_int_call(sony_nc_acpi_handle, "SN05", &arg, &result);
+
+ } else {
+ /* old style event */
+ ev_type = 1;
+ sony_laptop_report_input_event(real_ev);
+ }
+
+ acpi_bus_generate_proc_event(sony_nc_acpi_device, ev_type, real_ev);
+
+ acpi_bus_generate_netlink_event(sony_nc_acpi_device->pnp.device_class,
+ dev_name(&sony_nc_acpi_device->dev), ev_type, real_ev);
}
static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
@@ -1180,21 +1237,126 @@ static acpi_status sony_walk_callback(acpi_handle handle, u32 level,
/*
* ACPI device
*/
-static int sony_nc_function_setup(struct acpi_device *device)
+static void sony_nc_function_setup(struct acpi_device *device,
+ struct platform_device *pf_device)
{
- int result, arg;
+ unsigned int i, result, bitmask, arg;
+
+ if (!handles)
+ return;
+
+ /* setup found handles here */
+ for (i = 0; i < ARRAY_SIZE(handles->cap); i++) {
+ unsigned int handle = handles->cap[i];
+
+ if (!handle)
+ continue;
+
+ dprintk("setting up handle 0x%.4x\n", handle);
+
+ switch (handle) {
+ case 0x0100:
+ case 0x0101:
+ case 0x0127:
+ /* setup hotkeys */
+ sony_call_snc_handle(handle, 0, &result);
+ break;
+ case 0x0102:
+ /* setup hotkeys */
+ sony_call_snc_handle(handle, 0x100, &result);
+ break;
+ case 0x0124:
+ case 0x0135:
+ sony_nc_rfkill_setup(device);
+ break;
+ case 0x0137:
+ sony_nc_kbd_backlight_setup(pf_device);
+ break;
+ default:
+ continue;
+ }
+ }
/* Enable all events */
- arg = 0xffff;
- sony_nc_int_call(sony_nc_acpi_handle, "SN02", &arg, &result);
+ arg = 0x10;
+ if (!sony_nc_int_call(sony_nc_acpi_handle, "SN00", &arg, &bitmask))
+ sony_nc_int_call(sony_nc_acpi_handle, "SN02", &bitmask,
+ &result);
+}
+
+static void sony_nc_function_cleanup(struct platform_device *pd)
+{
+ unsigned int i, result, bitmask, handle;
- /* Setup hotkeys */
- sony_call_snc_handle(0x0100, 0, &result);
- sony_call_snc_handle(0x0101, 0, &result);
- sony_call_snc_handle(0x0102, 0x100, &result);
- sony_call_snc_handle(0x0127, 0, &result);
+ /* get enabled events and disable them */
+ sony_nc_int_call(sony_nc_acpi_handle, "SN01", NULL, &bitmask);
+ sony_nc_int_call(sony_nc_acpi_handle, "SN03", &bitmask, &result);
- return 0;
+ /* cleanup handles here */
+ for (i = 0; i < ARRAY_SIZE(handles->cap); i++) {
+
+ handle = handles->cap[i];
+
+ if (!handle)
+ continue;
+
+ switch (handle) {
+ case 0x0124:
+ case 0x0135:
+ sony_nc_rfkill_cleanup();
+ break;
+ case 0x0137:
+ sony_nc_kbd_backlight_cleanup(pd);
+ break;
+ default:
+ continue;
+ }
+ }
+
+ /* finally cleanup the handles list */
+ sony_nc_handles_cleanup(pd);
+}
+
+static void sony_nc_function_resume(void)
+{
+ unsigned int i, result, bitmask, arg;
+
+ dprintk("Resuming SNC device\n");
+
+ for (i = 0; i < ARRAY_SIZE(handles->cap); i++) {
+ unsigned int handle = handles->cap[i];
+
+ if (!handle)
+ continue;
+
+ switch (handle) {
+ case 0x0100:
+ case 0x0101:
+ case 0x0127:
+ /* re-enable hotkeys */
+ sony_call_snc_handle(handle, 0, &result);
+ break;
+ case 0x0102:
+ /* re-enable hotkeys */
+ sony_call_snc_handle(handle, 0x100, &result);
+ break;
+ case 0x0124:
+ case 0x0135:
+ sony_nc_rfkill_update();
+ break;
+ case 0x0137:
+ sony_nc_kbd_backlight_resume();
+ break;
+ default:
+ continue;
+ }
+ }
+
+ /* Enable all events */
+ arg = 0x10;
+ if (!sony_nc_int_call(sony_nc_acpi_handle, "SN00", &arg, &bitmask))
+ sony_nc_int_call(sony_nc_acpi_handle, "SN02", &bitmask,
+ &result);
}
static int sony_nc_resume(struct acpi_device *device)
@@ -1223,16 +1385,8 @@ static int sony_nc_resume(struct acpi_device *device)
}
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "SN00",
- &handle))) {
- dprintk("Doing SNC setup\n");
- sony_nc_function_setup(device);
- }
-
- /* re-read rfkill state */
- sony_nc_rfkill_update();
-
- /* restore kbd backlight states */
- sony_nc_kbd_backlight_resume();
+ &handle)))
+ sony_nc_function_resume();
return 0;
}
@@ -1509,18 +1663,18 @@ static ssize_t sony_nc_kbd_backlight_timeout_show(struct device *dev,
return count;
}
-static int sony_nc_kbd_backlight_setup(struct platform_device *pd)
+static void sony_nc_kbd_backlight_setup(struct platform_device *pd)
{
int result;
if (sony_call_snc_handle(KBDBL_HANDLER, KBDBL_PRESENT, &result))
- return 0;
+ return;
if (!(result & 0x02))
- return 0;
+ return;
kbdbl_handle = kzalloc(sizeof(*kbdbl_handle), GFP_KERNEL);
if (!kbdbl_handle)
- return -ENOMEM;
+ return;
sysfs_attr_init(&kbdbl_handle->mode_attr.attr);
kbdbl_handle->mode_attr.attr.name = "kbd_backlight";
@@ -1543,14 +1697,14 @@ static int sony_nc_kbd_backlight_setup(struct platform_device *pd)
__sony_nc_kbd_backlight_mode_set(kbd_backlight);
__sony_nc_kbd_backlight_timeout_set(kbd_backlight_timeout);
- return 0;
+ return;
outmode:
device_remove_file(&pd->dev, &kbdbl_handle->mode_attr);
outkzalloc:
kfree(kbdbl_handle);
kbdbl_handle = NULL;
- return -1;
+ return;
}
static int sony_nc_kbd_backlight_cleanup(struct platform_device *pd)
@@ -1726,21 +1880,17 @@ static int sony_nc_add(struct acpi_device *device)
if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "SN00",
&handle))) {
dprintk("Doing SNC setup\n");
+ /* retrieve the available handles */
result = sony_nc_handles_setup(sony_pf_device);
- if (result)
- goto outpresent;
- result = sony_nc_kbd_backlight_setup(sony_pf_device);
- if (result)
- goto outsnc;
- sony_nc_function_setup(device);
- sony_nc_rfkill_setup(device);
+ if (!result)
+ sony_nc_function_setup(device, sony_pf_device);
}
/* setup input devices and helper fifo */
result = sony_laptop_setup_input(device);
if (result) {
pr_err("Unable to create input devices\n");
- goto outkbdbacklight;
+ goto outsnc;
}
if (acpi_video_backlight_support()) {
@@ -1798,10 +1948,8 @@ static int sony_nc_add(struct acpi_device *device)
sony_laptop_remove_input();
- outkbdbacklight:
- sony_nc_kbd_backlight_cleanup(sony_pf_device);
-
outsnc:
+ sony_nc_function_cleanup(sony_pf_device);
sony_nc_handles_cleanup(sony_pf_device);
outpresent:
@@ -1824,11 +1972,10 @@ static int sony_nc_remove(struct acpi_device *device, int type)
device_remove_file(&sony_pf_device->dev, &item->devattr);
}
- sony_nc_kbd_backlight_cleanup(sony_pf_device);
+ sony_nc_function_cleanup(sony_pf_device);
sony_nc_handles_cleanup(sony_pf_device);
sony_pf_remove();
sony_laptop_remove_input();
- sony_nc_rfkill_cleanup();
dprintk(SONY_NC_DRIVER_NAME " removed.\n");
return 0;
--
1.7.10
next prev parent reply other threads:[~2012-05-19 13:45 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-19 13:35 [PATCH 00/19] sony-laptop: support for new functions Mattia Dongili
2012-05-19 13:35 ` [PATCH 01/19] sony-laptop: use soft rfkill status stored in hw Mattia Dongili
2012-05-31 18:39 ` Matthew Garrett
2012-05-31 22:02 ` Mattia Dongili
2012-06-09 4:18 ` [PATCH 0/7] sony-laptop fixes on 3.5-rc1 Mattia Dongili
2012-06-09 4:18 ` [PATCH 1/7] sony-laptop: use an enum for SNC event types Mattia Dongili
2012-06-09 4:18 ` [PATCH 2/7] sony-laptop: notify userspace of GFX switch position changes Mattia Dongili
2012-06-09 4:18 ` [PATCH 3/7] sony-laptop: store battery care limits on batteries Mattia Dongili
2012-06-10 22:18 ` [PATCH 3/7 v2] " Mattia Dongili
2012-06-09 4:18 ` [PATCH 4/7] sony-laptop: add lid backlight support for handle 0x143 Mattia Dongili
2012-06-09 4:18 ` [PATCH 5/7] sony-laptop: input initialization should be done before SNC Mattia Dongili
2012-06-09 4:18 ` [PATCH 6/7] sony-laptop: fix sony_nc_sysfs_store() Mattia Dongili
2012-06-09 4:18 ` [PATCH 7/7] sony-laptop: fix a couple signedness bugs Mattia Dongili
2012-06-13 21:36 ` [PATCH] sony-laptop: correct find_snc_handle failure checks Mattia Dongili
2012-06-25 21:36 ` [PATCH 0/7] sony-laptop fixes on 3.5-rc1 Mattia Dongili
2012-06-26 18:37 ` Matthew Garrett
2012-07-16 8:03 ` Mattia Dongili
2012-05-19 13:35 ` [PATCH 02/19] sony-laptop: fix return path when no ACPI buffer is allocated Mattia Dongili
2012-05-19 13:35 ` [PATCH 03/19] sony-laptop: generalise ACPI calls into SNC functions Mattia Dongili
2012-05-19 13:35 ` [PATCH 04/19] sony-laptop: use kstrtoul to parse sysfs values Mattia Dongili
2012-05-19 13:35 ` Mattia Dongili [this message]
2012-05-19 13:35 ` [PATCH 06/19] sony-laptop: additional debug statements Mattia Dongili
2012-05-19 13:35 ` [PATCH 07/19] sony-laptop: support battery care functions Mattia Dongili
2012-05-31 18:20 ` Matthew Garrett
2012-05-19 13:35 ` [PATCH 08/19] sony-laptop: add thermal profiles support Mattia Dongili
2012-05-19 13:35 ` [PATCH 09/19] sony-laptop: adjust error handling in finding SNC handles Mattia Dongili
2012-05-19 13:35 ` [PATCH 10/19] sony-laptop: g-shock HD protection function Mattia Dongili
2012-05-19 13:35 ` [PATCH 11/19] sony-laptop: support automatic resume on lid open Mattia Dongili
2012-05-19 13:35 ` [PATCH 12/19] sony-laptop: add high speed battery charging function Mattia Dongili
2012-05-19 13:35 ` [PATCH 13/19] sony-laptop: new keyboard backlight handle Mattia Dongili
2012-05-19 13:35 ` [PATCH 14/19] sony-laptop: add support for more WWAN modems Mattia Dongili
2012-05-19 13:35 ` [PATCH 15/19] sony-laptop: add the ALS interface via SNC Mattia Dongili
2012-05-19 13:35 ` [PATCH 16/19] sony-laptop: add missing Fn key combos for 0x100 handlers Mattia Dongili
2012-05-19 13:36 ` [PATCH 17/19] sony-laptop: add touchpad enable/disable function Mattia Dongili
2012-05-19 13:36 ` [PATCH 18/19] sony-laptop: use an enum for SNC event types Mattia Dongili
2012-05-19 13:36 ` [PATCH 19/19] sony-laptop: notify userspace of GFX switch position changes Mattia Dongili
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1337434562-12283-6-git-send-email-malattia@linux.it \
--to=malattia@linux.it \
--cc=marco@absence.it \
--cc=mjg@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox