X86 platform drivers
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Qipeng Zha <qipeng.zha@intel.com>, platform-driver-x86@vger.kernel.org
Cc: dvhart@infradead.org
Subject: Re: [PATCH V9 1/2] intel_pmc_ipc: update acpi resource structure for Punit
Date: Thu, 10 Dec 2015 13:13:01 +0200	[thread overview]
Message-ID: <1449745981.30729.71.camel@linux.intel.com> (raw)
In-Reply-To: <1449771661-40300-1-git-send-email-qipeng.zha@intel.com>

On Fri, 2015-12-11 at 02:21 +0800, Qipeng Zha wrote:
> BIOS restructure exported memory resources for Punit
> in acpi table, So update resources for Punit.
> 
> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
> 

Almost. See below.

> ---
> change in v9
>  rename indexes of all acpi resources;
>  add comments for punit_res;
> ---
>  drivers/platform/x86/intel_pmc_ipc.c | 114 ++++++++++++++++++++++++-
> ----------
>  1 file changed, 80 insertions(+), 34 deletions(-)
> 
> diff --git a/drivers/platform/x86/intel_pmc_ipc.c
> b/drivers/platform/x86/intel_pmc_ipc.c
> index 28b2a12..00812a4 100644
> --- a/drivers/platform/x86/intel_pmc_ipc.c
> +++ b/drivers/platform/x86/intel_pmc_ipc.c
> @@ -68,8 +68,12 @@
>  #define PLAT_RESOURCE_IPC_INDEX		0
>  #define PLAT_RESOURCE_IPC_SIZE		0x1000
>  #define PLAT_RESOURCE_GCR_SIZE		0x1000
> -#define PLAT_RESOURCE_PUNIT_DATA_INDEX	1
> -#define PLAT_RESOURCE_PUNIT_INTER_INDEX	2
> +#define PLAT_RESOURCE_BIOS_DATA_INDEX	1
> +#define PLAT_RESOURCE_BIOS_INTER_INDEX	2

Since there is a comment and new version will be anticipated I also
would like to propose to change INTER to IFACE because latter more
particular. Darren?

> +#define PLAT_RESOURCE_ISP_DATA_INDEX	4
> +#define PLAT_RESOURCE_ISP_INTER_INDEX	5
> +#define PLAT_RESOURCE_GTD_DATA_INDEX	6
> +#define PLAT_RESOURCE_GTD_INTER_INDEX	7
>  #define PLAT_RESOURCE_ACPI_IO_INDEX	0
>  
>  /*
> @@ -105,10 +109,6 @@ static struct intel_pmc_ipc_dev {
>  	int gcr_size;
>  
>  	/* punit */
> -	resource_size_t punit_base;
> -	int punit_size;
> -	resource_size_t punit_base2;
> -	int punit_size2;
>  	struct platform_device *punit_dev;
>  } ipcdev;
>  
> @@ -444,9 +444,22 @@ static const struct attribute_group
> intel_ipc_group = {
>  	.attrs = intel_ipc_attrs,
>  };
>  
> -#define PUNIT_RESOURCE_INTER		1
> -static struct resource punit_res[] = {
> -	/* Punit */
> +static struct resource punit_res_array[] = {
> +	/* Punit BIOS */
> +	{
> +		.flags = IORESOURCE_MEM,
> +	},
> +	{
> +		.flags = IORESOURCE_MEM,
> +	},
> +	/* Punit ISP */
> +	{
> +		.flags = IORESOURCE_MEM,
> +	},
> +	{
> +		.flags = IORESOURCE_MEM,
> +	},
> +	/* Punit GTD */
>  	{
>  		.flags = IORESOURCE_MEM,
>  	},
> @@ -481,7 +494,6 @@ static struct itco_wdt_platform_data tco_info = {
>  static int ipc_create_punit_device(void)
>  {
>  	struct platform_device *pdev;
> -	struct resource *res;
>  	int ret;
>  
>  	pdev = platform_device_alloc(PUNIT_DEVICE_NAME, -1);
> @@ -491,17 +503,8 @@ static int ipc_create_punit_device(void)
>  	}
>  
>  	pdev->dev.parent = ipcdev.dev;
> -
> -	res = punit_res;
> -	res->start = ipcdev.punit_base;
> -	res->end = res->start + ipcdev.punit_size - 1;
> -
> -	res = punit_res + PUNIT_RESOURCE_INTER;
> -	res->start = ipcdev.punit_base2;
> -	res->end = res->start + ipcdev.punit_size2 - 1;
> -
> -	ret = platform_device_add_resources(pdev, punit_res,
> -					    ARRAY_SIZE(punit_res));
> +	ret = platform_device_add_resources(pdev, punit_res_array,
> +					    ARRAY_SIZE(punit_res_arr
> ay));
>  	if (ret) {
>  		dev_err(ipcdev.dev, "Failed to add platform punit
> resources\n");
>  		goto err;
> @@ -590,7 +593,7 @@ static int ipc_create_pmc_devices(void)
>  
>  static int ipc_plat_get_res(struct platform_device *pdev)
>  {
> -	struct resource *res;
> +	struct resource *res, *punit_res;
>  	void __iomem *addr;
>  	int size;
>  
> @@ -606,28 +609,71 @@ static int ipc_plat_get_res(struct
> platform_device *pdev)
>  	dev_info(&pdev->dev, "io res: %llx %x\n",
>  		 (long long)res->start, (int)resource_size(res));
>  
> +	/* This is index 0 to cover BIOS data register */
> +	punit_res = punit_res_array;
>  	res = platform_get_resource(pdev, IORESOURCE_MEM,
> -				    PLAT_RESOURCE_PUNIT_DATA_INDEX);
> +				    PLAT_RESOURCE_BIOS_DATA_INDEX);
>  	if (!res) {
> -		dev_err(&pdev->dev, "Failed to get punit
> resource\n");
> +		dev_err(&pdev->dev, "Failed to get res of punit BIOS
> data\n");
>  		return -ENXIO;
>  	}
> -	size = resource_size(res);
> -	ipcdev.punit_base = res->start;
> -	ipcdev.punit_size = size;
> -	dev_info(&pdev->dev, "punit data res: %llx %x\n",
> +	*punit_res = *res;
> +	dev_info(&pdev->dev, "punit BIOS data res: %llx %x\n",
>  		 (long long)res->start, (int)resource_size(res));
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM,
> -				    PLAT_RESOURCE_PUNIT_INTER_INDEX)
> ;
> +				    PLAT_RESOURCE_BIOS_INTER_INDEX);
>  	if (!res) {
> -		dev_err(&pdev->dev, "Failed to get punit inter
> resource\n");
> +		dev_err(&pdev->dev, "Failed to get res of punit BIOS
> inter\n");
>  		return -ENXIO;
>  	}
> -	size = resource_size(res);
> -	ipcdev.punit_base2 = res->start;
> -	ipcdev.punit_size2 = size;
> -	dev_info(&pdev->dev, "punit interface res: %llx %x\n",
> +	/* This is index 1 to cover BIOS interface register */
> +	*++punit_res = *res;
> +	dev_info(&pdev->dev, "punit BIOS interface res: %llx %x\n",
> +		 (long long)res->start, (int)resource_size(res));

There is a specifier to print struct resource, please use it instead.
%pR IIRC.

Same for all similar cases below.

> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM,
> +				    PLAT_RESOURCE_ISP_DATA_INDEX);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Failed to get res of punit ISP
> data\n");
> +		return -ENXIO;
> +	}
> +	/* This is index 2 to cover ISP data register */
> +	*++punit_res = *res;
> +	dev_info(&pdev->dev, "punit ISP data res: %llx %x\n",
> +		 (long long)res->start, (int)resource_size(res));
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM,
> +				    PLAT_RESOURCE_ISP_INTER_INDEX);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Failed to get res of punit ISP
> inter\n");
> +		return -ENXIO;
> +	}
> +	/* This is index 3 to cover ISP interface register */
> +	*++punit_res = *res;
> +	dev_info(&pdev->dev, "punit ISP interface res: %llx %x\n",
> +		 (long long)res->start, (int)resource_size(res));
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM,
> +				    PLAT_RESOURCE_GTD_DATA_INDEX);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Failed to get res of punit GTD
> data\n");
> +		return -ENXIO;
> +	}
> +	/* This is index 4 to cover GTD data register */
> +	*++punit_res = *res;
> +	dev_info(&pdev->dev, "punit GTD data res: %llx %x\n",
> +		 (long long)res->start, (int)resource_size(res));
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM,
> +				    PLAT_RESOURCE_GTD_INTER_INDEX);
> +	if (!res) {
> +		dev_err(&pdev->dev, "Failed to get res of punit GTD
> inter\n");
> +		return -ENXIO;
> +	}
> +	/* This is index 5 to cover GTD interface register */
> +	*++punit_res = *res;
> +	dev_info(&pdev->dev, "punit GTD interface res: %llx %x\n",
>  		 (long long)res->start, (int)resource_size(res));
>  
>  	res = platform_get_resource(pdev, IORESOURCE_MEM,

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

  reply	other threads:[~2015-12-10 11:12 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-12-10 18:21 [PATCH V9 1/2] intel_pmc_ipc: update acpi resource structure for Punit Qipeng Zha
2015-12-10 11:13 ` Andy Shevchenko [this message]
2015-12-10 22:59   ` Darren Hart
2015-12-10 18:21 ` [PATCH V9 2/2] platform:x86: add Intel P-Unit mailbox IPC driver Qipeng Zha
2015-12-10 11:23   ` Andy Shevchenko
2015-12-10 23:01     ` Darren Hart
2015-12-11  7:54       ` Zha, Qipeng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1449745981.30729.71.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=dvhart@infradead.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=qipeng.zha@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox