From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: Qipeng Zha <qipeng.zha@intel.com>, platform-driver-x86@vger.kernel.org
Cc: dvhart@infradead.org
Subject: Re: [PATCH V10 1/2] intel_pmc_ipc: update acpi resource structure for Punit
Date: Fri, 11 Dec 2015 12:49:11 +0200 [thread overview]
Message-ID: <1449830951.30729.108.camel@linux.intel.com> (raw)
In-Reply-To: <1449845100-119784-1-git-send-email-qipeng.zha@intel.com>
On Fri, 2015-12-11 at 22:44 +0800, Qipeng Zha wrote:
> BIOS restructure exported memory resources for Punit
> in acpi table, So update resources for Punit.
>
> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
Right, my tag for both patches:
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
>
> ---
> change in v10
> update comments and macros related to styles;
> use %pR to dump resource structure.
>
> change in v9
> rename indexes of all acpi resources;
> add comments for punit_res;
> ---
> drivers/platform/x86/intel_pmc_ipc.c | 118 +++++++++++++++++++++++
> ------------
> 1 file changed, 78 insertions(+), 40 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_pmc_ipc.c
> b/drivers/platform/x86/intel_pmc_ipc.c
> index 28b2a12..ca69135 100644
> --- a/drivers/platform/x86/intel_pmc_ipc.c
> +++ b/drivers/platform/x86/intel_pmc_ipc.c
> @@ -68,8 +68,12 @@
> #define PLAT_RESOURCE_IPC_INDEX 0
> #define PLAT_RESOURCE_IPC_SIZE 0x1000
> #define PLAT_RESOURCE_GCR_SIZE 0x1000
> -#define PLAT_RESOURCE_PUNIT_DATA_INDEX 1
> -#define PLAT_RESOURCE_PUNIT_INTER_INDEX 2
> +#define PLAT_RESOURCE_BIOS_DATA_INDEX 1
> +#define PLAT_RESOURCE_BIOS_IFACE_INDEX 2
> +#define PLAT_RESOURCE_ISP_DATA_INDEX 4
> +#define PLAT_RESOURCE_ISP_IFACE_INDEX 5
> +#define PLAT_RESOURCE_GTD_DATA_INDEX 6
> +#define PLAT_RESOURCE_GTD_IFACE_INDEX 7
> #define PLAT_RESOURCE_ACPI_IO_INDEX 0
>
> /*
> @@ -105,10 +109,6 @@ static struct intel_pmc_ipc_dev {
> int gcr_size;
>
> /* punit */
> - resource_size_t punit_base;
> - int punit_size;
> - resource_size_t punit_base2;
> - int punit_size2;
> struct platform_device *punit_dev;
> } ipcdev;
>
> @@ -444,9 +444,22 @@ static const struct attribute_group
> intel_ipc_group = {
> .attrs = intel_ipc_attrs,
> };
>
> -#define PUNIT_RESOURCE_INTER 1
> -static struct resource punit_res[] = {
> - /* Punit */
> +static struct resource punit_res_array[] = {
> + /* Punit BIOS */
> + {
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .flags = IORESOURCE_MEM,
> + },
> + /* Punit ISP */
> + {
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .flags = IORESOURCE_MEM,
> + },
> + /* Punit GTD */
> {
> .flags = IORESOURCE_MEM,
> },
> @@ -481,7 +494,6 @@ static struct itco_wdt_platform_data tco_info = {
> static int ipc_create_punit_device(void)
> {
> struct platform_device *pdev;
> - struct resource *res;
> int ret;
>
> pdev = platform_device_alloc(PUNIT_DEVICE_NAME, -1);
> @@ -491,17 +503,8 @@ static int ipc_create_punit_device(void)
> }
>
> pdev->dev.parent = ipcdev.dev;
> -
> - res = punit_res;
> - res->start = ipcdev.punit_base;
> - res->end = res->start + ipcdev.punit_size - 1;
> -
> - res = punit_res + PUNIT_RESOURCE_INTER;
> - res->start = ipcdev.punit_base2;
> - res->end = res->start + ipcdev.punit_size2 - 1;
> -
> - ret = platform_device_add_resources(pdev, punit_res,
> - ARRAY_SIZE(punit_res));
> + ret = platform_device_add_resources(pdev, punit_res_array,
> + ARRAY_SIZE(punit_res_arr
> ay));
> if (ret) {
> dev_err(ipcdev.dev, "Failed to add platform punit
> resources\n");
> goto err;
> @@ -590,7 +593,7 @@ static int ipc_create_pmc_devices(void)
>
> static int ipc_plat_get_res(struct platform_device *pdev)
> {
> - struct resource *res;
> + struct resource *res, *punit_res;
> void __iomem *addr;
> int size;
>
> @@ -603,32 +606,68 @@ static int ipc_plat_get_res(struct
> platform_device *pdev)
> size = resource_size(res);
> ipcdev.acpi_io_base = res->start;
> ipcdev.acpi_io_size = size;
> - dev_info(&pdev->dev, "io res: %llx %x\n",
> - (long long)res->start, (int)resource_size(res));
> + dev_info(&pdev->dev, "io res: %pR\n", res);
>
> + /* This is index 0 to cover BIOS data register */
> + punit_res = punit_res_array;
> res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_PUNIT_DATA_INDEX);
> + PLAT_RESOURCE_BIOS_DATA_INDEX);
> if (!res) {
> - dev_err(&pdev->dev, "Failed to get punit
> resource\n");
> + dev_err(&pdev->dev, "Failed to get res of punit BIOS
> data\n");
> return -ENXIO;
> }
> - size = resource_size(res);
> - ipcdev.punit_base = res->start;
> - ipcdev.punit_size = size;
> - dev_info(&pdev->dev, "punit data res: %llx %x\n",
> - (long long)res->start, (int)resource_size(res));
> + *punit_res = *res;
> + dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM,
> - PLAT_RESOURCE_PUNIT_INTER_INDEX)
> ;
> + PLAT_RESOURCE_BIOS_IFACE_INDEX);
> if (!res) {
> - dev_err(&pdev->dev, "Failed to get punit inter
> resource\n");
> + dev_err(&pdev->dev, "Failed to get res of punit BIOS
> iface\n");
> return -ENXIO;
> }
> - size = resource_size(res);
> - ipcdev.punit_base2 = res->start;
> - ipcdev.punit_size2 = size;
> - dev_info(&pdev->dev, "punit interface res: %llx %x\n",
> - (long long)res->start, (int)resource_size(res));
> + /* This is index 1 to cover BIOS interface register */
> + *++punit_res = *res;
> + dev_info(&pdev->dev, "punit BIOS interface res: %pR\n",
> res);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_DATA_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of punit ISP
> data\n");
> + return -ENXIO;
> + }
> + /* This is index 2 to cover ISP data register */
> + *++punit_res = *res;
> + dev_info(&pdev->dev, "punit ISP data res: %pR\n", res);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_ISP_IFACE_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of punit ISP
> iface\n");
> + return -ENXIO;
> + }
> + /* This is index 3 to cover ISP interface register */
> + *++punit_res = *res;
> + dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_DATA_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of punit GTD
> data\n");
> + return -ENXIO;
> + }
> + /* This is index 4 to cover GTD data register */
> + *++punit_res = *res;
> + dev_info(&pdev->dev, "punit GTD data res: %pR\n", res);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM,
> + PLAT_RESOURCE_GTD_IFACE_INDEX);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get res of punit GTD
> iface\n");
> + return -ENXIO;
> + }
> + /* This is index 5 to cover GTD interface register */
> + *++punit_res = *res;
> + dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
>
> res = platform_get_resource(pdev, IORESOURCE_MEM,
> PLAT_RESOURCE_IPC_INDEX);
> @@ -651,8 +690,7 @@ static int ipc_plat_get_res(struct
> platform_device *pdev)
>
> ipcdev.gcr_base = res->start + size;
> ipcdev.gcr_size = PLAT_RESOURCE_GCR_SIZE;
> - dev_info(&pdev->dev, "ipc res: %llx %x\n",
> - (long long)res->start, (int)resource_size(res));
> + dev_info(&pdev->dev, "ipc res: %pR\n", res);
>
> return 0;
> }
--
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy
next prev parent reply other threads:[~2015-12-11 10:48 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-11 14:44 [PATCH V10 1/2] intel_pmc_ipc: update acpi resource structure for Punit Qipeng Zha
2015-12-11 10:49 ` Andy Shevchenko [this message]
2015-12-11 18:09 ` Darren Hart
2015-12-17 13:17 ` Andy Shevchenko
2015-12-11 14:45 ` [PATCH V10 2/2] platform:x86: add Intel P-Unit mailbox IPC driver Qipeng Zha
2015-12-11 18:08 ` Darren Hart
-- strict thread matches above, loose matches on Subject: below --
2015-12-11 15:55 [PATCH V10 1/2] intel_pmc_ipc: update acpi resource structure for Punit Qipeng Zha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1449830951.30729.108.camel@linux.intel.com \
--to=andriy.shevchenko@linux.intel.com \
--cc=dvhart@infradead.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=qipeng.zha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox