From: Marek Vasut <marex@denx.de>
To: joeyli <jlee@suse.com>
Cc: platform-driver-x86@vger.kernel.org
Subject: Re: [PATCH 1/2] ACER: Add support for accelerometer sensor
Date: Wed, 6 Jun 2012 00:52:37 +0200 [thread overview]
Message-ID: <201206060052.38133.marex@denx.de> (raw)
In-Reply-To: <1338798193.6374.51.camel@linux-s257.site>
Dear joeyli,
> 於 五,2012-06-01 於 19:11 +0200,Marek Vasut 提到:
>
> > This device is present on Iconia Tab W500.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: joeyli <jlee@suse.com>
>
> This patch is good to me!
Thanks for your help and guidance throughout the process. Now who'll apply it
and when can I expect it in -next or somewhere (where?)?
> Acked-by: Lee, Chun-Yi <jlee@suse.com>
>
>
> Thanks a lot!
> Joey Lee
>
> > ---
> >
> > drivers/platform/x86/acer-wmi.c | 138
> > +++++++++++++++++++++++++++++++++++++++ 1 file changed, 138
> > insertions(+)
> >
> > diff --git a/drivers/platform/x86/acer-wmi.c
> > b/drivers/platform/x86/acer-wmi.c index c1a3fd8..edb6bad 100644
> > --- a/drivers/platform/x86/acer-wmi.c
> > +++ b/drivers/platform/x86/acer-wmi.c
> > @@ -95,6 +95,7 @@
> > MODULE_ALIAS("wmi:676AA15E-6A47-4D9F-A2CC-1E6D18D14026");
> >
> > enum acer_wmi_event_ids {
> >
> > WMID_HOTKEY_EVENT = 0x1,
> >
> > + WMID_ACCEL_EVENT = 0x5,
> >
> > };
> >
> > static const struct key_entry acer_wmi_keymap[] = {
> >
> > @@ -130,6 +131,7 @@ static const struct key_entry acer_wmi_keymap[] = {
> >
> > };
> >
> > static struct input_dev *acer_wmi_input_dev;
> >
> > +static struct input_dev *acer_wmi_accel_dev;
> >
> > struct event_return_value {
> >
> > u8 function;
> >
> > @@ -200,6 +202,7 @@ struct hotkey_function_type_aa {
> >
> > #define ACER_CAP_BLUETOOTH (1<<2)
> > #define ACER_CAP_BRIGHTNESS (1<<3)
> > #define ACER_CAP_THREEG (1<<4)
> >
> > +#define ACER_CAP_ACCEL (1<<5)
> >
> > #define ACER_CAP_ANY (0xFFFFFFFF)
> >
> > /*
> >
> > @@ -1375,6 +1378,60 @@ static void acer_backlight_exit(void)
> >
> > }
> >
> > /*
> >
> > + * Accelerometer device
> > + */
> > +static acpi_handle gsensor_handle;
> > +
> > +static int acer_gsensor_init(void)
> > +{
> > + acpi_status status;
> > + struct acpi_buffer output;
> > + union acpi_object out_obj;
> > +
> > + output.length = sizeof(out_obj);
> > + output.pointer = &out_obj;
> > + status = acpi_evaluate_object(gsensor_handle, "_INI", NULL, &output);
> > + if (ACPI_FAILURE(status))
> > + return -1;
> > +
> > + return 0;
> > +}
> > +
> > +static int acer_gsensor_open(struct input_dev *input)
> > +{
> > + return acer_gsensor_init();
> > +}
> > +
> > +static int acer_gsensor_event(void)
> > +{
> > + acpi_status status;
> > + struct acpi_buffer output;
> > + union acpi_object out_obj[5];
> > +
> > + if (!has_cap(ACER_CAP_ACCEL))
> > + return -1;
> > +
> > + output.length = sizeof(out_obj);
> > + output.pointer = out_obj;
> > +
> > + status = acpi_evaluate_object(gsensor_handle, "RDVL", NULL, &output);
> > + if (ACPI_FAILURE(status))
> > + return -1;
> > +
> > + if (out_obj->package.count != 4)
> > + return -1;
> > +
> > + input_report_abs(acer_wmi_accel_dev, ABS_X,
> > + (s16)out_obj->package.elements[0].integer.value);
> > + input_report_abs(acer_wmi_accel_dev, ABS_Y,
> > + (s16)out_obj->package.elements[1].integer.value);
> > + input_report_abs(acer_wmi_accel_dev, ABS_Z,
> > + (s16)out_obj->package.elements[2].integer.value);
> > + input_sync(acer_wmi_accel_dev);
> > + return 0;
> > +}
> > +
> > +/*
> >
> > * Rfkill devices
> > */
> >
> > static void acer_rfkill_update(struct work_struct *ignored);
> >
> > @@ -1649,6 +1706,9 @@ static void acer_wmi_notify(u32 value, void
> > *context)
> >
> > 1, true);
> >
> > }
> > break;
> >
> > + case WMID_ACCEL_EVENT:
> > + acer_gsensor_event();
> > + break;
> >
> > default:
> > pr_warn("Unknown function number - %d - %d\n",
> >
> > return_value.function, return_value.key_num);
> >
> > @@ -1734,6 +1794,74 @@ static int acer_wmi_enable_lm(void)
> >
> > return status;
> >
> > }
> >
> > +static acpi_status __init acer_wmi_get_handle_cb(acpi_handle ah, u32
> > level, + void *ctx, void
**retval)
> > +{
> > + *(acpi_handle *)retval = ah;
> > + return AE_OK;
> > +}
> > +
> > +static int __init acer_wmi_get_handle(const char *name, const char
> > *prop, + acpi_handle *ah)
> > +{
> > + acpi_status status;
> > + acpi_handle handle;
> > +
> > + BUG_ON(!name || !ah);
> > +
> > + handle = 0;
> > + status = acpi_get_devices(prop, acer_wmi_get_handle_cb,
> > + (void *)name, &handle);
> > +
> > + if (ACPI_SUCCESS(status)) {
> > + *ah = handle;
> > + return 0;
> > + } else {
> > + return -ENODEV;
> > + }
> > +}
> > +
> > +static int __init acer_wmi_accel_setup(void)
> > +{
> > + int err;
> > +
> > + err = acer_wmi_get_handle("SENR", "BST0001", &gsensor_handle);
> > + if (err)
> > + return err;
> > +
> > + interface->capability |= ACER_CAP_ACCEL;
> > +
> > + acer_wmi_accel_dev = input_allocate_device();
> > + if (!acer_wmi_accel_dev)
> > + return -ENOMEM;
> > +
> > + acer_wmi_accel_dev->open = acer_gsensor_open;
> > +
> > + acer_wmi_accel_dev->name = "Acer BMA150 accelerometer";
> > + acer_wmi_accel_dev->phys = "wmi/input1";
> > + acer_wmi_accel_dev->id.bustype = BUS_HOST;
> > + acer_wmi_accel_dev->evbit[0] = BIT_MASK(EV_ABS);
> > + input_set_abs_params(acer_wmi_accel_dev, ABS_X, -16384, 16384, 0, 0);
> > + input_set_abs_params(acer_wmi_accel_dev, ABS_Y, -16384, 16384, 0, 0);
> > + input_set_abs_params(acer_wmi_accel_dev, ABS_Z, -16384, 16384, 0, 0);
> > +
> > + err = input_register_device(acer_wmi_accel_dev);
> > + if (err)
> > + goto err_free_dev;
> > +
> > + return 0;
> > +
> > +err_free_dev:
> > + input_free_device(acer_wmi_accel_dev);
> > + return err;
> > +}
> > +
> > +static void acer_wmi_accel_destroy(void)
> > +{
> > + input_unregister_device(acer_wmi_accel_dev);
> > + input_free_device(acer_wmi_accel_dev);
> > +}
> > +
> >
> > static int __init acer_wmi_input_setup(void)
> > {
> >
> > acpi_status status;
> >
> > @@ -1889,6 +2017,9 @@ static int acer_platform_resume(struct
> > platform_device *device)
> >
> > if (has_cap(ACER_CAP_BRIGHTNESS))
> >
> > set_u32(data->brightness, ACER_CAP_BRIGHTNESS);
> >
> > + if (has_cap(ACER_CAP_ACCEL))
> > + acer_gsensor_init();
> > +
> >
> > return 0;
> >
> > }
> >
> > @@ -2066,6 +2197,8 @@ static int __init acer_wmi_init(void)
> >
> > return err;
> >
> > }
> >
> > + acer_wmi_accel_setup();
> > +
> >
> > err = platform_driver_register(&acer_platform_driver);
> > if (err) {
> >
> > pr_err("Unable to register platform driver\n");
> >
> > @@ -2109,6 +2242,8 @@ error_device_alloc:
> > error_platform_register:
> > if (wmi_has_guid(ACERWMID_EVENT_GUID))
> >
> > acer_wmi_input_destroy();
> >
> > + if (has_cap(ACER_CAP_ACCEL))
> > + acer_wmi_accel_destroy();
> >
> > return err;
> >
> > }
> >
> > @@ -2118,6 +2253,9 @@ static void __exit acer_wmi_exit(void)
> >
> > if (wmi_has_guid(ACERWMID_EVENT_GUID))
> >
> > acer_wmi_input_destroy();
> >
> > + if (has_cap(ACER_CAP_ACCEL))
> > + acer_wmi_accel_destroy();
> > +
> >
> > remove_sysfs(acer_platform_device);
> > remove_debugfs();
> > platform_device_unregister(acer_platform_device);
next prev parent reply other threads:[~2012-06-05 22:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-01 17:11 [PATCH 1/2] ACER: Add support for accelerometer sensor Marek Vasut
2012-06-01 17:11 ` [PATCH 2/2] ACER: Add support for ambient light sensor Marek Vasut
2012-06-04 9:08 ` joeyli
2012-06-04 9:29 ` Marek Vasut
2012-06-04 11:13 ` Corentin Chary
2012-06-04 17:14 ` Marek Vasut
2012-06-05 12:49 ` Corentin Chary
2012-06-05 13:06 ` Marek Vasut
2012-06-05 22:55 ` Marek Vasut
2012-06-06 1:22 ` Zhang Rui
2012-06-22 20:20 ` Marek Vasut
2012-06-04 8:23 ` [PATCH 1/2] ACER: Add support for accelerometer sensor joeyli
2012-06-05 22:52 ` Marek Vasut [this message]
2012-06-06 0:15 ` joeyli
2012-06-06 10:13 ` Marek Vasut
2012-06-26 18:41 ` Matthew Garrett
2012-06-26 18:52 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201206060052.38133.marex@denx.de \
--to=marex@denx.de \
--cc=jlee@suse.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox