From: Darren Hart <dvhart@infradead.org>
To: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org, platform-driver-x86@vger.kernel.org,
Bertrik Sikken <bertrik@sikken.nl>
Subject: Re: [PATCH] samsung-laptop: Add use_native_backlight quirk, and enable it on some models
Date: Tue, 13 Jan 2015 09:53:12 -0800 [thread overview]
Message-ID: <20150113175312.GA130525@vmdeb7> (raw)
In-Reply-To: <54B4CC75.4030807@redhat.com>
On Tue, Jan 13, 2015 at 08:42:45AM +0100, Hans de Goede wrote:
> Hi,
>
> On 13-01-15 05:03, Darren Hart wrote:
> >On Fri, Jan 09, 2015 at 03:10:01PM +0100, Hans de Goede wrote:
> >>Since kernel 3.14 the backlight control has been broken on various Samsung
> >>Atom based netbooks. This has been bisected and this problem happens since
> >>commit b35684b8fa94 ("drm/i915: do full backlight setup at enable time")
> >>
> >>This has been reported and discussed in detail here:
> >>http://lists.freedesktop.org/archives/intel-gfx/2014-July/049395.html
> >>
> >>Unfortunately no-one has been able to fix this. This only affects Samsung
> >>Atom netbooks, and the Linux kernel and the BIOS of those laptops have never
> >>worked well together. All affected laptops already have a quirk to avoid using
> >>the standard acpi-video interface and instead use the samsung specific SABI
> >>interface which samsung-laptop uses. It seems that recent fixes to the i915
> >>driver have also broken backlight control through the SABI interface.
> >>
> >>The intel_backlight driver OTOH works fine, and also allows for finer grained
> >>backlight control. So add a new use_native_backlight quirk, and replace the
> >>broken_acpi_video quirk with this quirk for affected models. This new quirk
> >>disables acpi-video as before and also stops samsung-laptop from registering
> >
> >
> >I take this to me this quirk is broken_acpi_video && use_native_backlight.
>
> In what it does yes, but I've chosen to make it a standalone quirk named after
> the acpi/video.c use_native_backlight option, which also disables both acpi-video
> and vendor backlight interfaces, so for consistency I'm using the same setup here.
>
> We cannot use the acpi/video.c option here because that option, which is on by
> default, only triggers on win8 ready BIOS-es and these machines do not have such
> a BIOS.
>
> Eventually I would like to see the acpi/video.c code switch away from having
> the 2 semi-orthogonal kernel cmdline options it currently has, which are
> acpi_backlight=[vendor|video] vs video.use_native_backlight=[0|1], while what
> we really have is just three options:
>
> acpi_backlight=[vendor|video|native]
>
> I've explained what I would like to see happen / think needs to happen to clean
> up this mess here: https://lkml.org/lkml/2014/12/27/54
>
> So the way I see it the broken_acpi_video quirks means use acpi_backlight=vendor
> where as the new use_native_backlight option means acpi_backlight=native, and
> eventually these 2 quirks would end up in just one call in samsung-laptop.c, which
> says:
>
> acpi_video_set_backlight_type(acpi_video_backlight_vendor);
>
> resp:
>
> acpi_video_set_backlight_type(acpi_video_backlight_native);
>
> So I really see this as an either or thing, yes native implies disabling
> acpi_video# but that does not mean that it is the same thing as vendor.
Thank you for the detailed response. Queued for 3.20.
--
Darren Hart
Intel Open Source Technology Center
prev parent reply other threads:[~2015-01-13 17:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-09 14:10 [PATCH] samsung-laptop: Add use_native_backlight quirk, and enable it on some models Hans de Goede
2015-01-13 4:03 ` Darren Hart
2015-01-13 7:42 ` Hans de Goede
2015-01-13 17:53 ` Darren Hart [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150113175312.GA130525@vmdeb7 \
--to=dvhart@infradead.org \
--cc=bertrik@sikken.nl \
--cc=hdegoede@redhat.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox