From: Darren Hart <dvhart@infradead.org>
To: Qipeng Zha <qipeng.zha@intel.com>
Cc: platform-driver-x86@vger.kernel.org,
Mika Westerberg <mika.westerberg@intel.com>,
andriy.shevchenko@intel.com
Subject: Re: [PATCH] platform:x86: add Intel Punit mailbox IPC driver
Date: Wed, 5 Aug 2015 14:25:13 -0700 [thread overview]
Message-ID: <20150805212512.GD38348@vmdeb7> (raw)
In-Reply-To: <1438358336-79179-1-git-send-email-qipeng.zha@intel.com>
On Fri, Jul 31, 2015 at 11:58:56PM +0800, Qipeng Zha wrote:
> This driver provides support for Punit mailbox IPC on Intel platforms.
> The heart of the Punit is the Foxton microcontroller and its firmware,
> which provide mailbox interface for power management usage.
>
Mika, Andriy:
I'm traveling over the next few days and could use some help ensuring this new
driver receives some additional review. If you can, I'd appreciate your
thoughts.
> Signed-off-by: Qipeng Zha <qipeng.zha@intel.com>
> ---
> arch/x86/include/asm/intel_punit_ipc.h | 101 +++++++++
> drivers/platform/x86/Kconfig | 6 +
> drivers/platform/x86/Makefile | 1 +
> drivers/platform/x86/intel_punit_ipc.c | 388 +++++++++++++++++++++++++++++++++
> 4 files changed, 496 insertions(+)
> create mode 100644 arch/x86/include/asm/intel_punit_ipc.h
> create mode 100644 drivers/platform/x86/intel_punit_ipc.c
>
> diff --git a/arch/x86/include/asm/intel_punit_ipc.h b/arch/x86/include/asm/intel_punit_ipc.h
> new file mode 100644
> index 0000000..08e3e14
> --- /dev/null
> +++ b/arch/x86/include/asm/intel_punit_ipc.h
> @@ -0,0 +1,101 @@
> +#ifndef _ASM_X86_INTEL_PUNIT_IPC_H_
> +#define _ASM_X86_INTEL_PUNIT_IPC_H_
> +
> +/* Commands supported on GLM core, are handled by different bars,
> + * unify these commands together here
> + */
> +#define IPC_BIOS_PUNIT_CMD_BASE 0x00
> +#define IPC_GTD_PUNIT_CMD_BASE 0x20
> +#define IPC_ISPD_PUNIT_CMD_BASE 0x40
> +
> +/* BIOS => Pcode commands */
> +#define IPC_BIOS_PUNIT_CMD_ZERO (IPC_BIOS_PUNIT_CMD_BASE + 0x00)
> +#define IPC_BIOS_PUNIT_CMD_VR_INTERFACE (IPC_BIOS_PUNIT_CMD_BASE + 0x01)
> +#define IPC_BIOS_PUNIT_CMD_READ_PCS (IPC_BIOS_PUNIT_CMD_BASE + 0x02)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_PCS (IPC_BIOS_PUNIT_CMD_BASE + 0x03)
> +#define IPC_BIOS_PUNIT_CMD_READ_PCU_CONFIG (IPC_BIOS_PUNIT_CMD_BASE + 0x04)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_PCU_CONFIG (IPC_BIOS_PUNIT_CMD_BASE + 0x05)
> +#define IPC_BIOS_PUNIT_CMD_READ_PL1_SETTING (IPC_BIOS_PUNIT_CMD_BASE + 0x06)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_PL1_SETTING (IPC_BIOS_PUNIT_CMD_BASE + 0x07)
> +#define IPC_BIOS_PUNIT_CMD_TRIGGER_VDD_RAM (IPC_BIOS_PUNIT_CMD_BASE + 0x08)
> +#define IPC_BIOS_PUNIT_CMD_READ_TELE_INFO (IPC_BIOS_PUNIT_CMD_BASE + 0x09)
> +#define IPC_BIOS_PUNIT_CMD_READ_TELE_TRACE_CTRL (IPC_BIOS_PUNIT_CMD_BASE + 0x0a)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_TELE_TRACE_CTRL \
> + (IPC_BIOS_PUNIT_CMD_BASE + 0x0b)
> +#define IPC_BIOS_PUNIT_CMD_READ_TELE_EVENT_CTRL (IPC_BIOS_PUNIT_CMD_BASE + 0x0c)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_TELE_EVENT_CTRL \
> + (IPC_BIOS_PUNIT_CMD_BASE + 0x0d)
> +#define IPC_BIOS_PUNIT_CMD_READ_TELE_TRACE (IPC_BIOS_PUNIT_CMD_BASE + 0x0e)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_TELE_TRACE (IPC_BIOS_PUNIT_CMD_BASE + 0x0f)
> +#define IPC_BIOS_PUNIT_CMD_READ_TELE_EVENT (IPC_BIOS_PUNIT_CMD_BASE + 0x10)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_TELE_EVENT (IPC_BIOS_PUNIT_CMD_BASE + 0x11)
> +#define IPC_BIOS_PUNIT_CMD_READ_MODULE_TEMP (IPC_BIOS_PUNIT_CMD_BASE + 0x12)
> +#define IPC_BIOS_PUNIT_CMD_RESERVED (IPC_BIOS_PUNIT_CMD_BASE + 0x13)
> +#define IPC_BIOS_PUNIT_CMD_READ_VOLTAGE_OVER (IPC_BIOS_PUNIT_CMD_BASE + 0x14)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_VOLTAGE_OVER (IPC_BIOS_PUNIT_CMD_BASE + 0x15)
> +#define IPC_BIOS_PUNIT_CMD_READ_RATIO_OVER (IPC_BIOS_PUNIT_CMD_BASE + 0x16)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_RATIO_OVER (IPC_BIOS_PUNIT_CMD_BASE + 0x17)
> +#define IPC_BIOS_PUNIT_CMD_READ_VF_GL_CTRL (IPC_BIOS_PUNIT_CMD_BASE + 0x18)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_VF_GL_CTRL (IPC_BIOS_PUNIT_CMD_BASE + 0x19)
> +#define IPC_BIOS_PUNIT_CMD_READ_FM_SOC_TEMP_THRESH \
> + (IPC_BIOS_PUNIT_CMD_BASE + 0x1a)
> +#define IPC_BIOS_PUNIT_CMD_WRITE_FM_SOC_TEMP_THRESH \
> + (IPC_BIOS_PUNIT_CMD_BASE + 0x1b)
> +
> +/*GT Driver => Pcode commands*/
> +#define IPC_GTD_PUNIT_CMD_ZERO (IPC_GTD_PUNIT_CMD_BASE + 0x00)
> +#define IPC_GTD_PUNIT_CMD_CONFIG (IPC_GTD_PUNIT_CMD_BASE + 0x01)
> +#define IPC_GTD_PUNIT_CMD_READ_ICCP_LIC_CDYN_SCAL \
> + (IPC_GTD_PUNIT_CMD_BASE + 0x02)
> +#define IPC_GTD_PUNIT_CMD_WRITE_ICCP_LIC_CDYN_SCAL \
> + (IPC_GTD_PUNIT_CMD_BASE + 0x03)
> +#define IPC_GTD_PUNIT_CMD_GET_WM_VAL (IPC_GTD_PUNIT_CMD_BASE + 0x06)
> +#define IPC_GTD_PUNIT_CMD_WRITE_CONFIG_WISHREQ (IPC_GTD_PUNIT_CMD_BASE + 0x07)
> +#define IPC_GTD_PUNIT_CMD_READ_REQ_DUTY_CYCLE (IPC_GTD_PUNIT_CMD_BASE + 0x16)
> +#define IPC_GTD_PUNIT_CMD_DIS_VOL_FREQ_CHANGE_REQUEST \
> + (IPC_GTD_PUNIT_CMD_BASE + 0x17)
> +#define IPC_GTD_PUNIT_CMD_DYNA_DUTY_CYCLE_CTRL (IPC_GTD_PUNIT_CMD_BASE + 0x1a)
> +#define IPC_GTD_PUNIT_CMD_DYNA_DUTY_CYCLE_TUNING \
> + (IPC_GTD_PUNIT_CMD_BASE + 0x1c)
> +
> +/* ISP Driver => Pcode commands */
> +#define IPC_ISPD_PUNIT_CMD_ZERO (IPC_ISPD_PUNIT_CMD_BASE + 0x00)
> +#define IPC_ISPD_PUNIT_CMD_CONFIG (IPC_ISPD_PUNIT_CMD_BASE + 0x01)
> +#define IPC_ISPD_PUNIT_CMD_GET_ISP_LTR_VAL (IPC_ISPD_PUNIT_CMD_BASE + 0x02)
> +#define IPC_ISPD_PUNIT_CMD_ACCESS_IU_FREQ_BOUNDS \
> + (IPC_ISPD_PUNIT_CMD_BASE + 0x03)
> +#define IPC_ISPD_PUNIT_CMD_READ_CDYN_LEVEL (IPC_ISPD_PUNIT_CMD_BASE + 0x04)
> +#define IPC_ISPD_PUNIT_CMD_WRITE_CDYN_LEVEL (IPC_ISPD_PUNIT_CMD_BASE + 0x05)
> +#define IPC_ISPD_PUNIT_CMD_MAX (IPC_ISPD_PUNIT_CMD_BASE + 0x06)
> +
> +/* Error codes */
> +#define IPC_ERR_SUCCESS 0
> +#define IPC_ERR_INVALID_CMD 1
> +#define IPC_ERR_INVALID_PARAMETER 2
> +#define IPC_ERR_CMD_TIMEOUT 3
> +#define IPC_ERR_CMD_LOCKED 4
> +#define IPC_ERR_INVALID_VR_ID 5
> +#define IPC_ERR_VR_ERR 6
> +
> +#if IS_ENABLED(CONFIG_INTEL_PUNIT_IPC)
> +
> +int intel_punit_ipc_simple_command(int cmd, int para1, int para2);
> +int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out);
> +
> +#else
> +
> +static intline int intel_punit_ipc_simple_command(int cmd,
> + int para1, int para2);
> +{
> + return -EINVAL;
> +}
> +
> +static inline int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2,
> + u32 *in, u32 *out);
> +{
> + return -EINVAL;
> +}
> +
> +#endif /*CONFIG_INTEL_PUNIT_IPC*/
> +
> +#endif
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 346f1fd..42ada9b 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -891,4 +891,10 @@ config INTEL_PMC_IPC
> The PMC is an ARC processor which defines IPC commands for communication
> with other entities in the CPU.
>
> +config INTEL_PUNIT_IPC
> + tristate "Intel PUNIT IPC Driver"
> + default y
> + ---help---
> + IPC is used to bridge the communications between kernel and PUNIT
> +
> endif # X86_PLATFORM_DEVICES
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 1051372..eea765f 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -59,3 +59,4 @@ obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o
> obj-$(CONFIG_PVPANIC) += pvpanic.o
> obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o
> obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o
> +obj-$(CONFIG_INTEL_PUNIT_IPC) += intel_punit_ipc.o
> diff --git a/drivers/platform/x86/intel_punit_ipc.c b/drivers/platform/x86/intel_punit_ipc.c
> new file mode 100644
> index 0000000..78cb794
> --- /dev/null
> +++ b/drivers/platform/x86/intel_punit_ipc.c
> @@ -0,0 +1,388 @@
> +/*
> + * intel_punit_ipc.c: Driver for the Intel Punit Mailbox IPC mechanism
> + *
> + * (C) Copyright 2015 Intel Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * The heart of the Punit is the Foxton microcontroller and its firmware,
> + * which provide mailbox interface for power management usage.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/pm.h>
> +#include <linux/acpi.h>
> +#include <linux/interrupt.h>
> +#include <linux/kernel.h>
> +#include <linux/bitops.h>
> +#include <linux/atomic.h>
> +#include <linux/notifier.h>
> +#include <linux/suspend.h>
> +#include <linux/platform_device.h>
> +#include <asm/intel_punit_ipc.h>
> +
> +/* Mailbox registers */
> +#define MAILBOX_DATA_LOW 0x0
> +#define MAILBOX_INTERFACE 0x4
> +#define CMD_RUN (1 << 31)
> +#define CMD_ERRCODE_MASK 0xFF
> +#define CMD_PARA1_SHIFT 8
> +#define CMD_PARA2_SHIFT 16
> +#define CMD_MASK 0xFF
> +#define MAILBOX_DATA_HIGH 0x8
> +
> +#define MAILBOX_REGISTER_SPACE 0x10
> +
> +#define CMD_TIMEOUT_SECONDS 3
> +
> +/* Three external mailbox */
> +enum mailbox_type {
> + BIOS_MAILBOX,
> + GTDRIVER_MAILBOX,
> + ISPDRIVER_MAILBOX,
> + RESERVED_MAILBOX,
> +};
> +
> +struct intel_punit_ipc_controller {
> + struct platform_device *pdev;
> + struct mutex lock;
> + void __iomem *base[RESERVED_MAILBOX];
> + struct completion cmd_complete;
> + int irq;
> +
> + int cmd;
> + enum mailbox_type type;
> +};
> +
> +static char *ipc_err_sources[] = {
> + [IPC_ERR_SUCCESS] =
> + "no error",
> + [IPC_ERR_INVALID_CMD] =
> + "invalid command",
> + [IPC_ERR_INVALID_PARAMETER] =
> + "invalid parameter",
> + [IPC_ERR_CMD_TIMEOUT] =
> + "command timeout",
> + [IPC_ERR_CMD_LOCKED] =
> + "command locked",
> + [IPC_ERR_INVALID_VR_ID] =
> + "invalid vr id",
> + [IPC_ERR_VR_ERR] =
> + "vr error",
> +};
> +
> +static struct intel_punit_ipc_controller ipcdev;
> +
> +static inline u32 ipc_read_status(void)
> +{
> + return readl(ipcdev.base[ipcdev.type] + MAILBOX_INTERFACE);
> +}
> +
> +static inline void ipc_write_cmd(u32 cmd)
> +{
> + writel(cmd, ipcdev.base[ipcdev.type] + MAILBOX_INTERFACE);
> +}
> +
> +static inline u32 ipc_read_data_low(void)
> +{
> + return readl(ipcdev.base[ipcdev.type] + MAILBOX_DATA_LOW);
> +}
> +
> +static inline u32 ipc_read_data_high(void)
> +{
> + return readl(ipcdev.base[ipcdev.type] + MAILBOX_DATA_HIGH);
> +}
> +
> +static inline void ipc_write_data_low(u32 data)
> +{
> + writel(data, ipcdev.base[ipcdev.type] + MAILBOX_DATA_LOW);
> +}
> +
> +static inline void ipc_write_data_high(u32 data)
> +{
> + writel(data, ipcdev.base[ipcdev.type] + MAILBOX_DATA_HIGH);
> +}
> +
> +static int intel_punit_init_cmd(u32 cmd)
> +{
> + cmd &= CMD_MASK;
> + if (cmd < IPC_BIOS_PUNIT_CMD_BASE)
> + return -EINVAL;
> + else if (cmd < IPC_GTD_PUNIT_CMD_BASE)
> + ipcdev.type = BIOS_MAILBOX;
> + else if (cmd < IPC_ISPD_PUNIT_CMD_BASE)
> + ipcdev.type = GTDRIVER_MAILBOX;
> + else if (cmd < IPC_ISPD_PUNIT_CMD_MAX)
> + ipcdev.type = ISPDRIVER_MAILBOX;
> + else
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int intel_punit_ipc_send_command(u32 cmd)
> +{
> + int ret;
> +
> + ret = intel_punit_init_cmd(cmd);
> + if (ret)
> + return ret;
> + ipcdev.cmd = cmd;
> + reinit_completion(&ipcdev.cmd_complete);
> + ipc_write_cmd(cmd);
> + return 0;
> +}
> +
> +static int intel_punit_ipc_check_status(void)
> +{
> + int loops = CMD_TIMEOUT_SECONDS * USEC_PER_SEC;
> + int ret = 0;
> + int status;
> + int errcode;
> +
> + if (ipcdev.irq) {
> + if (0 == wait_for_completion_timeout(
> + &ipcdev.cmd_complete,
> + CMD_TIMEOUT_SECONDS * HZ)) {
> + dev_err(&ipcdev.pdev->dev,
> + "IPC timed out, IPC_CMD=0x%x\n", ipcdev.cmd);
> + return -ETIMEDOUT;
> + }
> + } else {
> + while ((ipc_read_status() & CMD_RUN) && --loops)
> + udelay(1);
> + if (!loops) {
> + dev_err(&ipcdev.pdev->dev,
> + "IPC timed out, IPC_CMD=0x%x\n", ipcdev.cmd);
> + return -ETIMEDOUT;
> + }
> + }
> +
> + status = ipc_read_status();
> + errcode = status & CMD_ERRCODE_MASK;
> + if (errcode) {
> + ret = -EIO;
> + if (errcode < ARRAY_SIZE(ipc_err_sources))
> + dev_err(&ipcdev.pdev->dev,
> + "IPC failed: %s, IPC_STS=0x%x, IPC_CMD=0x%x\n",
> + ipc_err_sources[errcode], status, ipcdev.cmd);
> + else
> + dev_err(&ipcdev.pdev->dev,
> + "IPC failed: unknown err,STS=0x%x, CMD=0x%x\n",
> + status, ipcdev.cmd);
> + }
> +
> + return ret;
> +}
> +
> +/**
> + * intel_punit_ipc_simple_command() - Simple IPC command
> + * @cmd: IPC command code.
> + * @para1: First 8bit parameter, set 0 if invalid.
> + * @para2: Second 8bit parameter, set 0 if invalid.
> + *
> + * Send a IPC command to Punit when there is no data transaction
> + *
> + * Return: an IPC error code or 0 on success.
> + */
> +int intel_punit_ipc_simple_command(int cmd, int para1, int para2)
> +{
> + int ret;
> +
> + mutex_lock(&ipcdev.lock);
> + ret = intel_punit_ipc_send_command(CMD_RUN |
> + para2 << CMD_PARA2_SHIFT |
> + para1 << CMD_PARA1_SHIFT | cmd);
> + if (ret)
> + goto out;
> + ret = intel_punit_ipc_check_status();
> +out:
> + mutex_unlock(&ipcdev.lock);
> + return ret;
> +}
> +EXPORT_SYMBOL(intel_punit_ipc_simple_command);
> +
> +/**
> + * intel_punit_ipc_command() - IPC command with data and pointers
> + * @cmd: IPC command code.
> + * @para1: First 8bit parameter, set 0 if invalid.
> + * @para2: Second 8bit parameter, set 0 if invalid.
> + * @in: Input data, 32bit for BIOS cmd, two 32bit for GTD and ISPD.
> + * @out: Output data.
> + *
> + * Send a IPC command to Punit with data transaction
> + *
> + * Return: an IPC error code or 0 on success.
> + */
> +int intel_punit_ipc_command(u32 cmd, u32 para1, u32 para2, u32 *in, u32 *out)
> +{
> + int ret;
> +
> + mutex_lock(&ipcdev.lock);
> + ipc_write_data_low(*in);
> + if (ipcdev.type == GTDRIVER_MAILBOX ||
> + ipcdev.type == ISPDRIVER_MAILBOX) {
> + in++;
> + ipc_write_data_high(*in);
> + }
> + ret = intel_punit_ipc_send_command(CMD_RUN |
> + para2 << CMD_PARA2_SHIFT |
> + para1 << CMD_PARA1_SHIFT | cmd);
> + if (ret)
> + goto out;
> + ret = intel_punit_ipc_check_status();
> + *out = ipc_read_data_low();
> + if (ipcdev.type == GTDRIVER_MAILBOX ||
> + ipcdev.type == ISPDRIVER_MAILBOX) {
> + out++;
> + *out = ipc_read_data_high();
> + }
> +out:
> + mutex_unlock(&ipcdev.lock);
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(intel_punit_ipc_command);
> +
> +static irqreturn_t intel_punit_ioc(int irq, void *dev_id)
> +{
> + complete(&ipcdev.cmd_complete);
> + return IRQ_HANDLED;
> +}
> +
> +static int intel_punit_get_bars(struct platform_device *pdev)
> +{
> + struct resource *res0, *res1;
> + void __iomem *addr;
> + int size;
> + int ret;
> +
> + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res0) {
> + dev_err(&pdev->dev, "Failed to get iomem resource\n");
> + return -EINVAL;
> + }
> + size = resource_size(res0);
> + if (!request_mem_region(res0->start, size, pdev->name)) {
> + dev_err(&pdev->dev, "Failed to request iomem resouce\n");
> + return -EBUSY;
> + }
> +
> + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (!res1) {
> + dev_err(&pdev->dev, "Failed to get iomem resource1\n");
> + return -EINVAL;
> + }
> + size = resource_size(res1);
> + if (!request_mem_region(res1->start, size, pdev->name)) {
> + dev_err(&pdev->dev, "Failed to request iomem resouce1\n");
> + ret = -EBUSY;
> + goto err_res1;
> + }
> +
> + addr = ioremap_nocache(res0->start,
> + resource_size(res0) + resource_size(res1));
> + if (!addr) {
> + dev_err(&pdev->dev, "Failed to ioremap ipc base\n");
> + ret = -ENOMEM;
> + goto err_map;
> + }
> + ipcdev.base[BIOS_MAILBOX] = addr;
> + addr += MAILBOX_REGISTER_SPACE;
> + ipcdev.base[GTDRIVER_MAILBOX] = addr;
> + addr += MAILBOX_REGISTER_SPACE;
> + ipcdev.base[ISPDRIVER_MAILBOX] = addr;
> +
> + return 0;
> +
> +err_map:
> + release_mem_region(res1->start, resource_size(res1));
> +err_res1:
> + release_mem_region(res0->start, resource_size(res0));
> + return ret;
> +}
> +
> +static int intel_punit_ipc_probe(struct platform_device *pdev)
> +{
> + int irq;
> + int ret;
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0) {
> + ipcdev.irq = 0;
> + dev_warn(&pdev->dev, "Could not get irq number\n");
> + } else {
> + if (request_irq(irq, intel_punit_ioc, IRQF_NO_SUSPEND,
> + "intel_punit_ipc", &ipcdev)) {
> + dev_err(&pdev->dev, "request irq %d\n", irq);
> + return -EBUSY;
> + }
> + ipcdev.irq = irq;
> + }
> +
> + ret = intel_punit_get_bars(pdev);
> + if (ret) {
> + if (ipcdev.irq)
> + free_irq(ipcdev.irq, &ipcdev);
> + return ret;
> + }
> +
> + ipcdev.pdev = pdev;
> + mutex_init(&ipcdev.lock);
> + init_completion(&ipcdev.cmd_complete);
> + return ret;
> +}
> +
> +static int intel_punit_ipc_remove(struct platform_device *pdev)
> +{
> + struct resource *res;
> +
> + if (ipcdev.irq)
> + free_irq(ipcdev.irq, &ipcdev);
> + iounmap(ipcdev.base[BIOS_MAILBOX]);
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (res)
> + release_mem_region(res->start, resource_size(res));
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
> + if (res)
> + release_mem_region(res->start, resource_size(res));
> + return 0;
> +}
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id punit_ipc_acpi_ids[] = {
> + {"INT34D4", 0}
> +};
> +#endif
> +
> +static struct platform_driver intel_punit_ipc_driver = {
> + .probe = intel_punit_ipc_probe,
> + .remove = intel_punit_ipc_remove,
> + .driver = {
> + .name = "intel_punit_ipc",
> + .acpi_match_table = ACPI_PTR(punit_ipc_acpi_ids),
> + },
> +};
> +
> +static int __init intel_punit_ipc_init(void)
> +{
> + return platform_driver_register(&intel_punit_ipc_driver);
> +}
> +
> +static void __exit intel_punit_ipc_exit(void)
> +{
> + platform_driver_unregister(&intel_punit_ipc_driver);
> +}
> +
> +MODULE_AUTHOR("Zha Qipeng <qipeng.zha@intel.com>");
> +MODULE_DESCRIPTION("Intel Punit IPC driver");
> +MODULE_LICENSE("GPL");
> +
> +/* Some modules are dependent on this, so init earlier */
> +fs_initcall(intel_punit_ipc_init);
> +module_exit(intel_punit_ipc_exit);
> --
> 1.8.3.2
>
>
--
Darren Hart
Intel Open Source Technology Center
next prev parent reply other threads:[~2015-08-05 21:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 15:58 [PATCH] platform:x86: add Intel Punit mailbox IPC driver Qipeng Zha
2015-08-05 21:25 ` Darren Hart [this message]
2015-08-07 12:29 ` Mika Westerberg
2015-08-10 15:04 ` Shevchenko, Andriy
2015-08-18 15:50 ` Matt Fleming
2015-08-25 20:33 ` Darren Hart
2015-08-26 8:22 ` Zha, Qipeng
2015-08-28 18:57 ` Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150805212512.GD38348@vmdeb7 \
--to=dvhart@infradead.org \
--cc=andriy.shevchenko@intel.com \
--cc=mika.westerberg@intel.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=qipeng.zha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox