From: "Giedrius Statkevičius" <giedrius.statkevicius@gmail.com>
To: corentin.chary@gmail.com, dvhart@infradead.org
Cc: acpi4asus-user@lists.sourceforge.net,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Giedrius Statkevičius" <giedrius.statkevicius@gmail.com>
Subject: [PATCH] asus-laptop: get rid of parse_arg()
Date: Fri, 5 Aug 2016 23:57:10 +0300 [thread overview]
Message-ID: <20160805205710.4735-1-giedrius.statkevicius@gmail.com> (raw)
parse_arg() duplicates the funcionality of kstrtoint() so use the latter
function instead. There is no funcionality change except that in the
case of input being too big -ERANGE will be returned instead of -EINVAL
which is not bad because -ERANGE makes more sense here. The check for
!count is already done by the sysfs core so no need to duplicate it
again. Also, add some minor corrections to error handling to accommodate
the change in return values (parse_arg returned count if everything
succeeded whereas kstrtoint returns 0 in the same situation)
As a result of this patch asus-laptop.ko size is reduced by almost 1%:
add/remove: 0/1 grow/shrink: 1/6 up/down: 1/-149 (-148)
function old new delta
__UNIQUE_ID_vermagic0 69 70 +1
ls_switch_store 133 117 -16
ledd_store 175 159 -16
display_store 157 141 -16
ls_level_store 193 176 -17
gps_store 200 178 -22
sysfs_acpi_set.isra 148 125 -23
parse_arg.part 39 - -39
Total: Before=19160, After=19012, chg -0.77%
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
---
drivers/platform/x86/asus-laptop.c | 77 ++++++++++++++++++--------------------
1 file changed, 36 insertions(+), 41 deletions(-)
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index 15f1311..28551f5 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -932,30 +932,19 @@ static ssize_t infos_show(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RO(infos);
-static int parse_arg(const char *buf, unsigned long count, int *val)
-{
- if (!count)
- return 0;
- if (count > 31)
- return -EINVAL;
- if (sscanf(buf, "%i", val) != 1)
- return -EINVAL;
- return count;
-}
-
static ssize_t sysfs_acpi_set(struct asus_laptop *asus,
const char *buf, size_t count,
const char *method)
{
int rv, value;
- rv = parse_arg(buf, count, &value);
- if (rv <= 0)
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
return rv;
if (write_acpi_int(asus->handle, method, value))
return -ENODEV;
- return rv;
+ return count;
}
/*
@@ -975,15 +964,17 @@ static ssize_t ledd_store(struct device *dev, struct device_attribute *attr,
struct asus_laptop *asus = dev_get_drvdata(dev);
int rv, value;
- rv = parse_arg(buf, count, &value);
- if (rv > 0) {
- if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
- pr_warn("LED display write failed\n");
- return -ENODEV;
- }
- asus->ledd_status = (u32) value;
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
+ return rv;
+
+ if (write_acpi_int(asus->handle, METHOD_LEDD, value)) {
+ pr_warn("LED display write failed\n");
+ return -ENODEV;
}
- return rv;
+
+ asus->ledd_status = (u32) value;
+ return count;
}
static DEVICE_ATTR_RW(ledd);
@@ -1148,10 +1139,12 @@ static ssize_t display_store(struct device *dev, struct device_attribute *attr,
struct asus_laptop *asus = dev_get_drvdata(dev);
int rv, value;
- rv = parse_arg(buf, count, &value);
- if (rv > 0)
- asus_set_display(asus, value);
- return rv;
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
+ return rv;
+
+ asus_set_display(asus, value);
+ return count;
}
static DEVICE_ATTR_WO(display);
@@ -1190,11 +1183,12 @@ static ssize_t ls_switch_store(struct device *dev,
struct asus_laptop *asus = dev_get_drvdata(dev);
int rv, value;
- rv = parse_arg(buf, count, &value);
- if (rv > 0)
- asus_als_switch(asus, value ? 1 : 0);
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
+ return rv;
- return rv;
+ asus_als_switch(asus, value ? 1 : 0);
+ return count;
}
static DEVICE_ATTR_RW(ls_switch);
@@ -1219,14 +1213,15 @@ static ssize_t ls_level_store(struct device *dev, struct device_attribute *attr,
struct asus_laptop *asus = dev_get_drvdata(dev);
int rv, value;
- rv = parse_arg(buf, count, &value);
- if (rv > 0) {
- value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
- /* 0 <= value <= 15 */
- asus_als_level(asus, value);
- }
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
+ return rv;
+
+ value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+ /* 0 <= value <= 15 */
+ asus_als_level(asus, value);
- return rv;
+ return count;
}
static DEVICE_ATTR_RW(ls_level);
@@ -1301,14 +1296,14 @@ static ssize_t gps_store(struct device *dev, struct device_attribute *attr,
int rv, value;
int ret;
- rv = parse_arg(buf, count, &value);
- if (rv <= 0)
- return -EINVAL;
+ rv = kstrtoint(buf, 0, &value);
+ if (rv < 0)
+ return rv;
ret = asus_gps_switch(asus, !!value);
if (ret)
return ret;
rfkill_set_sw_state(asus->gps.rfkill, !value);
- return rv;
+ return count;
}
static DEVICE_ATTR_RW(gps);
--
2.9.0
next reply other threads:[~2016-08-05 20:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-05 20:57 Giedrius Statkevičius [this message]
2016-08-05 23:15 ` [PATCH] asus-laptop: get rid of parse_arg() Darren Hart
2016-08-06 17:00 ` Giedrius Statkevičius
2016-08-12 21:40 ` Darren Hart
2016-08-16 9:49 ` Giedrius Statkevičius
2016-08-17 18:23 ` Darren Hart
2016-09-03 5:51 ` Giedrius Statkevičius
2016-09-19 0:52 ` Darren Hart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160805205710.4735-1-giedrius.statkevicius@gmail.com \
--to=giedrius.statkevicius@gmail.com \
--cc=acpi4asus-user@lists.sourceforge.net \
--cc=corentin.chary@gmail.com \
--cc=dvhart@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox