From: Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>
To: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org
Cc: "Ayman Bagabas"
<ayman.bagabas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
platform-driver-x86-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Hui Wang" <hui.wang-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>,
ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
"Jacek Anaszewski"
<jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Pavel Machek" <pavel-+ZI9xUNit7I@public.gmane.org>,
"Pali Rohár" <pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Andy Shevchenko"
<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>,
linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 1/6] leds: trigger: Introduce audio mute LED trigger
Date: Mon, 26 Nov 2018 18:11:21 +0100 [thread overview]
Message-ID: <20181126171126.20280-2-tiwai@suse.de> (raw)
In-Reply-To: <20181126171126.20280-1-tiwai-l3A5Bk7waGM@public.gmane.org>
This patch adds a new LED trigger for coupling the audio mixer change
with the LED on laptops or other devices. Currently there are two
trigger types, "audio-mute" and "audio-micmute".
The audio driver triggers the LED brightness change via
ledtrig_audio_set() call with the proper type (either mute or
mic-mute). OTOH, the consumers may call ledtrig_audio_get() for the
initial brightness value that may have been set by the audio driver
beforehand.
This new stuff will be used by HD-audio codec driver and some platform
drivers (thinkpad_acpi and dell-laptop, also upcoming huawei-wmi).
Signed-off-by: Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>
---
drivers/leds/trigger/Kconfig | 7 +++++
drivers/leds/trigger/Makefile | 1 +
drivers/leds/trigger/ledtrig-audio.c | 45 ++++++++++++++++++++++++++++
include/linux/leds.h | 20 +++++++++++++
4 files changed, 73 insertions(+)
create mode 100644 drivers/leds/trigger/ledtrig-audio.c
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index b76fc3cdc8f8..23cc85e2e0e5 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -136,4 +136,11 @@ config LEDS_TRIGGER_PATTERN
which is a series of tuples, of brightness and duration (ms).
If unsure, say N
+config LEDS_TRIGGER_AUDIO
+ tristate "Audio Mute LED Trigger"
+ help
+ This allows LEDs to be controlled by audio drivers for following
+ the audio mute and mic-mute changes.
+ If unsure, say N
+
endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
index 9bcb64ee8123..733a83e2a718 100644
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -14,3 +14,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
obj-$(CONFIG_LEDS_TRIGGER_PANIC) += ledtrig-panic.o
obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
+obj-$(CONFIG_LEDS_TRIGGER_AUDIO) += ledtrig-audio.o
diff --git a/drivers/leds/trigger/ledtrig-audio.c b/drivers/leds/trigger/ledtrig-audio.c
new file mode 100644
index 000000000000..cf2b6837f570
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-audio.c
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Audio Mute LED trigger
+//
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/leds.h>
+
+static struct led_trigger *ledtrig_audio[NUM_AUDIO_LEDS];
+static enum led_brightness audio_state[NUM_AUDIO_LEDS];
+
+enum led_brightness ledtrig_audio_get(enum led_audio type)
+{
+ return audio_state[type];
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_get);
+
+void ledtrig_audio_set(enum led_audio type, enum led_brightness state)
+{
+ audio_state[type] = state;
+ led_trigger_event(ledtrig_audio[type], state);
+}
+EXPORT_SYMBOL_GPL(ledtrig_audio_set);
+
+static int __init ledtrig_audio_init(void)
+{
+ led_trigger_register_simple("audio-mute",
+ &ledtrig_audio[LED_AUDIO_MUTE]);
+ led_trigger_register_simple("audio-micmute",
+ &ledtrig_audio[LED_AUDIO_MICMUTE]);
+ return 0;
+}
+module_init(ledtrig_audio_init);
+
+static void __exit ledtrig_audio_exit(void)
+{
+ led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MUTE]);
+ led_trigger_unregister_simple(ledtrig_audio[LED_AUDIO_MICMUTE]);
+}
+module_exit(ledtrig_audio_exit);
+
+MODULE_DESCRIPTION("LED trigger for audio mute control");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/leds.h b/include/linux/leds.h
index 7393a316d9fa..580cbaef789a 100644
--- a/include/linux/leds.h
+++ b/include/linux/leds.h
@@ -487,4 +487,24 @@ struct led_pattern {
int brightness;
};
+enum led_audio {
+ LED_AUDIO_MUTE, /* master mute LED */
+ LED_AUDIO_MICMUTE, /* mic mute LED */
+ NUM_AUDIO_LEDS
+};
+
+#if IS_ENABLED(CONFIG_LEDS_TRIGGER_AUDIO)
+enum led_brightness ledtrig_audio_get(enum led_audio type);
+void ledtrig_audio_set(enum led_audio type, enum led_brightness state);
+#else
+static inline enum led_brightness ledtrig_audio_get(enum led_audio type)
+{
+ return LED_OFF;
+}
+static inline void ledtrig_audio_set(enum led_audio type,
+ enum led_brightness state)
+{
+}
+#endif
+
#endif /* __LINUX_LEDS_H_INCLUDED */
--
2.19.1
next prev parent reply other threads:[~2018-11-26 17:11 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-26 17:11 [PATCH 0/6] Introduce audio-mute LED trigger (and conversions to it) Takashi Iwai
2018-11-26 17:11 ` [PATCH 2/6] platform/x86: dell-laptop: Add micmute LED trigger support Takashi Iwai
2018-11-26 17:11 ` [PATCH 3/6] platform/x86: thinkpad_acpi: Add audio mute LED classdev support Takashi Iwai
2018-11-26 23:04 ` Andy Shevchenko
2018-11-27 11:04 ` Takashi Iwai
2018-11-26 17:11 ` [PATCH 5/6] platform/x86: dell-laptop: Drop superfluous exported function Takashi Iwai
[not found] ` <20181126171126.20280-1-tiwai-l3A5Bk7waGM@public.gmane.org>
2018-11-26 17:11 ` Takashi Iwai [this message]
[not found] ` <20181126171126.20280-2-tiwai-l3A5Bk7waGM@public.gmane.org>
2018-11-26 20:59 ` [PATCH 1/6] leds: trigger: Introduce audio mute LED trigger Jacek Anaszewski
2018-11-27 11:04 ` Takashi Iwai
2018-11-26 22:58 ` Andy Shevchenko
2018-11-27 11:04 ` Takashi Iwai
2018-11-26 17:11 ` [PATCH 4/6] ALSA: hda - Support led audio trigger Takashi Iwai
2018-11-26 17:11 ` [PATCH 6/6] platform/x86: thinkpad_acpi: Drop superfluous exported function Takashi Iwai
2018-11-26 23:09 ` [PATCH 0/6] Introduce audio-mute LED trigger (and conversions to it) Andy Shevchenko
2018-11-27 11:05 ` Takashi Iwai
2018-11-27 8:44 ` Pavel Machek
2018-11-27 11:06 ` Takashi Iwai
2018-11-28 11:18 ` Pali Rohár
2018-11-28 11:38 ` Takashi Iwai
2018-11-28 12:25 ` Pavel Machek
2018-11-28 12:58 ` Takashi Iwai
2018-11-28 13:40 ` Andy Shevchenko
2018-11-28 19:58 ` Jacek Anaszewski
2018-11-28 20:34 ` Pavel Machek
2018-11-28 20:46 ` Pali Rohár
2018-11-28 21:00 ` Jacek Anaszewski
2018-11-28 21:22 ` Pavel Machek
2018-11-29 21:23 ` Jacek Anaszewski
2018-11-29 21:56 ` Takashi Iwai
2018-11-30 10:42 ` Andy Shevchenko
2018-12-01 14:41 ` Well-known LED names was " Pavel Machek
2018-12-08 21:59 ` Jacek Anaszewski
2018-11-28 21:01 ` Pavel Machek
2018-11-27 10:26 ` [ibm-acpi-devel] " Henrique de Moraes Holschuh
2018-11-27 11:11 ` Takashi Iwai
2018-11-28 11:14 ` Pali Rohár
2018-11-28 11:30 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181126171126.20280-2-tiwai@suse.de \
--to=tiwai-l3a5bk7wagm@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=ayman.bagabas-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=hui.wang-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org \
--cc=ibm-acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=jacek.anaszewski-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-leds-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=pali.rohar-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=pavel-+ZI9xUNit7I@public.gmane.org \
--cc=platform-driver-x86-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox