X86 platform drivers
 help / color / mirror / Atom feed
From: Mark Pearson <markpearson@lenovo.com>
To: <markpearson@lenovo.com>
Cc: <hdegoede@redhat.com>, <andy.shevchenko@gmail.com>,
	<prasanth.ksr@dell.com>, <divya.bharathi@dell.com>,
	<Dell.Client.Kernel@dell.com>,
	<platform-driver-x86@vger.kernel.org>
Subject: [PATCH v4 2/3] platform/x86: dell-wmi-sysman: Use firmware_attributes_class helper
Date: Wed, 26 May 2021 16:14:46 -0400	[thread overview]
Message-ID: <20210526201447.3686-2-markpearson@lenovo.com> (raw)
In-Reply-To: <20210526201447.3686-1-markpearson@lenovo.com>

Update Dell WMI sysman driver to use newly implemented helper module.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
---
Changes in v2:
 - firmare_attributes_class.c added as reqested during review of the
   proposed think_lmi.c driver. Labeling as V2 to keep series
   consistent
 - Note, compile tested only due to lack of HW to test on. Matching
   changes were made in the think-lmi.c driver and worked. Please let me
   know if any problems!

Changes in v3:
 - Updated to use new firmware attribute class API names

Changes in v4:
 - version bump for consistency in series

 drivers/platform/x86/dell/Kconfig              |  1 +
 .../platform/x86/dell/dell-wmi-sysman/sysman.c | 18 ++++++++----------
 2 files changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/platform/x86/dell/Kconfig b/drivers/platform/x86/dell/Kconfig
index e0a55337f..931f616ff 100644
--- a/drivers/platform/x86/dell/Kconfig
+++ b/drivers/platform/x86/dell/Kconfig
@@ -197,6 +197,7 @@ config DELL_WMI_SYSMAN
 	depends on ACPI_WMI
 	depends on DMI
 	select NLS
+	select FW_ATTR_CLASS
 	help
 	  This driver allows changing BIOS settings on many Dell machines from
 	  2018 and newer without the use of any additional software.
diff --git a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
index c8d276d78..06b3fe7da 100644
--- a/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
+++ b/drivers/platform/x86/dell/dell-wmi-sysman/sysman.c
@@ -13,14 +13,11 @@
 #include <linux/kernel.h>
 #include <linux/wmi.h>
 #include "dell-wmi-sysman.h"
+#include "../../firmware_attributes_class.h"
 
 #define MAX_TYPES  4
 #include <linux/nls.h>
 
-static struct class firmware_attributes_class = {
-	.name = "firmware-attributes",
-};
-
 struct wmi_sysman_priv wmi_priv = {
 	.mutex = __MUTEX_INITIALIZER(wmi_priv.mutex),
 };
@@ -28,6 +25,7 @@ struct wmi_sysman_priv wmi_priv = {
 /* reset bios to defaults */
 static const char * const reset_types[] = {"builtinsafe", "lastknowngood", "factory", "custom"};
 static int reset_option = -1;
+struct class *fw_attr_class;
 
 
 /**
@@ -541,11 +539,11 @@ static int __init sysman_init(void)
 		goto err_exit_bios_attr_pass_interface;
 	}
 
-	ret = class_register(&firmware_attributes_class);
+	ret = fw_attributes_class_get(&fw_attr_class);
 	if (ret)
 		goto err_exit_bios_attr_pass_interface;
 
-	wmi_priv.class_dev = device_create(&firmware_attributes_class, NULL, MKDEV(0, 0),
+	wmi_priv.class_dev = device_create(fw_attr_class, NULL, MKDEV(0, 0),
 				  NULL, "%s", DRIVER_NAME);
 	if (IS_ERR(wmi_priv.class_dev)) {
 		ret = PTR_ERR(wmi_priv.class_dev);
@@ -602,10 +600,10 @@ static int __init sysman_init(void)
 	release_attributes_data();
 
 err_destroy_classdev:
-	device_destroy(&firmware_attributes_class, MKDEV(0, 0));
+	device_destroy(fw_attr_class, MKDEV(0, 0));
 
 err_unregister_class:
-	class_unregister(&firmware_attributes_class);
+	fw_attributes_class_put();
 
 err_exit_bios_attr_pass_interface:
 	exit_bios_attr_pass_interface();
@@ -619,8 +617,8 @@ static int __init sysman_init(void)
 static void __exit sysman_exit(void)
 {
 	release_attributes_data();
-	device_destroy(&firmware_attributes_class, MKDEV(0, 0));
-	class_unregister(&firmware_attributes_class);
+	device_destroy(fw_attr_class, MKDEV(0, 0));
+	fw_attributes_class_put();
 	exit_bios_attr_set_interface();
 	exit_bios_attr_pass_interface();
 }
-- 
2.31.1


  reply	other threads:[~2021-05-26 20:15 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26 20:14 [PATCH v4 1/3] platform/x86: firmware_attributes_class: Create helper file for handling firmware-attributes class registration events Mark Pearson
2021-05-26 20:14 ` Mark Pearson [this message]
2021-05-26 20:14 ` [PATCH v4 3/3] platform/x86: think-lmi: Add WMI interface support on Lenovo platforms Mark Pearson
2021-05-27  9:17   ` Hans de Goede
2021-05-27 12:20     ` [External] " Mark Pearson
2021-05-27 14:18     ` Andy Shevchenko
2021-05-27  9:19   ` Hans de Goede
2021-05-27 12:21     ` [External] " Mark Pearson
2021-05-27 14:16   ` Andy Shevchenko
2021-05-27 14:36     ` Hans de Goede
2021-05-27 14:54       ` Andy Shevchenko
2021-05-28 17:36     ` [External] " Mark Pearson
2021-05-28 18:19       ` Andy Shevchenko
2021-05-27  9:12 ` [PATCH v4 1/3] platform/x86: firmware_attributes_class: Create helper file for handling firmware-attributes class registration events Hans de Goede
2021-05-27 12:24   ` [External] " Mark Pearson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526201447.3686-2-markpearson@lenovo.com \
    --to=markpearson@lenovo.com \
    --cc=Dell.Client.Kernel@dell.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=divya.bharathi@dell.com \
    --cc=hdegoede@redhat.com \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=prasanth.ksr@dell.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox