From: Pit Henrich <pithenrich2d@googlemail.com>
To: hmh@hmh.eng.br
Cc: mpearson-lenovo@squebb.ca, derekjohn.clark@gmail.com,
hansg@kernel.org, ilpo.jarvinen@linux.intel.com,
ibm-acpi-devel@lists.sourceforge.net,
platform-driver-x86@vger.kernel.org,
linux-kernel@vger.kernel.org, pithenrich2d@gmail.com
Subject: [PATCH] platform/x86: thinkpad-acpi: Add X1 Fold keyboard attachment detection
Date: Sat, 14 Mar 2026 15:22:35 +0100 [thread overview]
Message-ID: <20260314142236.74514-1-pithenrich2d@gmail.com> (raw)
ThinkPad X1 Fold 16 Gen 1 firmware reports whether the keyboard is magnetically
attached (on the screen) via EC register 0xc1 bit 7, but thinkpad-acpi does
not expose this to userspace.
Add a read-only keyboard_attached_on_screen sysfs attribute, gated by
a DMI match. The state is read directly from the EC.
Cache the state and emit a sysfs notification on
TP_HKEY_EV_TABLET_CHANGED (0x60c0) when it changes. Initialize the cache during
hotkey setup and refresh it before the resume notification to keep the state
consistent across suspend and resume.
Signed-off-by: Pit Henrich <pithenrich2d@gmail.com>
---
drivers/platform/x86/lenovo/thinkpad_acpi.c | 92 ++++++++++++++++++++-
1 file changed, 90 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/lenovo/thinkpad_acpi.c b/drivers/platform/x86/lenovo/thinkpad_acpi.c
index 8982d92dfd97..5b255062ff51 100644
--- a/drivers/platform/x86/lenovo/thinkpad_acpi.c
+++ b/drivers/platform/x86/lenovo/thinkpad_acpi.c
@@ -218,8 +218,9 @@ enum tpacpi_hkey_event_t {
TP_HKEY_EV_LID_OPEN = 0x5002, /* laptop lid opened */
TP_HKEY_EV_TABLET_TABLET = 0x5009, /* tablet swivel up */
TP_HKEY_EV_TABLET_NOTEBOOK = 0x500a, /* tablet swivel down */
- TP_HKEY_EV_TABLET_CHANGED = 0x60c0, /* X1 Yoga (2016):
- * enter/leave tablet mode
+ TP_HKEY_EV_TABLET_CHANGED = 0x60c0, /* posture change event:
+ * X1 Yoga (2016): enter/leave tablet mode
+ * X1 Fold 16 Gen 1: keyboard attachment state changed
*/
TP_HKEY_EV_PEN_INSERTED = 0x500b, /* tablet pen inserted */
TP_HKEY_EV_PEN_REMOVED = 0x500c, /* tablet pen removed */
@@ -375,6 +376,7 @@ static struct {
u32 has_adaptive_kbd:1;
u32 kbd_lang:1;
u32 trackpoint_doubletap:1;
+ u32 has_keyboard_attached_on_screen:1;
struct quirk_entry *quirks;
} tp_features;
@@ -2928,6 +2930,70 @@ static void hotkey_tablet_mode_notify_change(void)
"hotkey_tablet_mode");
}
+/*
+ * On the ThinkPad X1 Fold 16 Gen 1, EC register 0xc1 reports the keyboard
+ * attachment state in bit 7.
+ */
+#define TPACPI_X1_FOLD_KBD_EC_STATUS 0xc1
+#define TPACPI_X1_FOLD_KBD_ATTACHED BIT(7)
+
+static bool keyboard_attached_on_screen;
+static bool keyboard_attached_on_screen_initialized;
+
+static int x1_fold_keyboard_attached_on_screen_get(bool *attached)
+{
+ u8 status;
+
+ if (!tp_features.has_keyboard_attached_on_screen)
+ return -ENODEV;
+
+ if (!acpi_ec_read(TPACPI_X1_FOLD_KBD_EC_STATUS, &status))
+ return -EIO;
+
+ *attached = status & TPACPI_X1_FOLD_KBD_ATTACHED;
+ return 0;
+}
+
+static ssize_t keyboard_attached_on_screen_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ bool attached;
+ int res;
+
+ res = x1_fold_keyboard_attached_on_screen_get(&attached);
+ if (res)
+ return res;
+
+ return sysfs_emit(buf, "%d\n", attached);
+}
+
+static DEVICE_ATTR_RO(keyboard_attached_on_screen);
+
+static void keyboard_attached_on_screen_notify_change(void)
+{
+ if (tp_features.has_keyboard_attached_on_screen)
+ sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+ "keyboard_attached_on_screen");
+}
+
+static bool keyboard_attached_on_screen_update(void)
+{
+ bool attached;
+
+ if (x1_fold_keyboard_attached_on_screen_get(&attached))
+ return false;
+
+ if (keyboard_attached_on_screen_initialized &&
+ keyboard_attached_on_screen == attached)
+ return false;
+
+ keyboard_attached_on_screen = attached;
+ keyboard_attached_on_screen_initialized = true;
+
+ return true;
+}
+
/* sysfs wakeup reason (pollable) -------------------------------------- */
static ssize_t hotkey_wakeup_reason_show(struct device *dev,
struct device_attribute *attr,
@@ -3032,6 +3098,7 @@ static struct attribute *hotkey_attributes[] = {
&dev_attr_hotkey_adaptive_all_mask.attr,
&dev_attr_hotkey_recommended_mask.attr,
&dev_attr_hotkey_tablet_mode.attr,
+ &dev_attr_keyboard_attached_on_screen.attr,
&dev_attr_hotkey_radio_sw.attr,
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
&dev_attr_hotkey_source_mask.attr,
@@ -3046,6 +3113,9 @@ static umode_t hotkey_attr_is_visible(struct kobject *kobj,
if (attr == &dev_attr_hotkey_tablet_mode.attr) {
if (!tp_features.hotkey_tablet)
return 0;
+ } else if (attr == &dev_attr_keyboard_attached_on_screen.attr) {
+ if (!tp_features.has_keyboard_attached_on_screen)
+ return 0;
} else if (attr == &dev_attr_hotkey_radio_sw.attr) {
if (!tp_features.hotkey_wlsw)
return 0;
@@ -3462,6 +3532,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
}
tabletsw_state = hotkey_init_tablet_mode();
+ keyboard_attached_on_screen_update();
/* Set up key map */
keymap_id = tpacpi_check_quirks(tpacpi_keymap_qtable,
@@ -3842,6 +3913,8 @@ static bool hotkey_notify_6xxx(const u32 hkey, bool *send_acpi_ev)
case TP_HKEY_EV_TABLET_CHANGED:
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
+ if (keyboard_attached_on_screen_update())
+ keyboard_attached_on_screen_notify_change();
*send_acpi_ev = false;
return true;
@@ -3998,6 +4071,8 @@ static void hotkey_resume(void)
tpacpi_send_radiosw_update();
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
+ keyboard_attached_on_screen_update();
+ keyboard_attached_on_screen_notify_change();
hotkey_wakeup_reason_notify_change();
hotkey_wakeup_hotunplug_complete_notify_change();
hotkey_poll_setup_safe(false);
@@ -4296,6 +4371,17 @@ static const struct dmi_system_id fwbug_list[] __initconst = {
{}
};
+static const struct dmi_system_id keyboard_attached_on_screen_list[] __initconst = {
+ {
+ .ident = "ThinkPad X1 Fold 16 Gen 1",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_FAMILY, "ThinkPad X1 Fold 16 Gen 1"),
+ },
+ },
+ {}
+};
+
static const struct pci_device_id fwbug_cards_ids[] __initconst = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
@@ -12230,6 +12316,8 @@ static int __init thinkpad_acpi_module_init(void)
dmi_id = dmi_first_match(fwbug_list);
if (dmi_id)
tp_features.quirks = dmi_id->driver_data;
+ tp_features.has_keyboard_attached_on_screen =
+ dmi_check_system(keyboard_attached_on_screen_list);
/* Device initialization */
tpacpi_pdev = platform_device_register_simple(TPACPI_DRVR_NAME, PLATFORM_DEVID_NONE,
--
2.43.0
next reply other threads:[~2026-03-14 14:22 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-14 14:22 Pit Henrich [this message]
2026-03-14 18:24 ` [PATCH] platform/x86: thinkpad-acpi: Add X1 Fold keyboard attachment detection Mark Pearson
2026-03-16 13:24 ` Hans de Goede
2026-03-16 18:06 ` Pit Henrich
2026-03-16 18:24 ` Mark Pearson
2026-03-16 21:24 ` Pit Henrich
2026-03-27 17:31 ` Mark Pearson
2026-03-16 13:22 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260314142236.74514-1-pithenrich2d@gmail.com \
--to=pithenrich2d@googlemail.com \
--cc=derekjohn.clark@gmail.com \
--cc=hansg@kernel.org \
--cc=hmh@hmh.eng.br \
--cc=ibm-acpi-devel@lists.sourceforge.net \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mpearson-lenovo@squebb.ca \
--cc=pithenrich2d@gmail.com \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox