From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-dy1-f176.google.com (mail-dy1-f176.google.com [74.125.82.176]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C05423A7826 for ; Tue, 21 Apr 2026 22:52:38 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=74.125.82.176 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1776811964; cv=none; b=hDc8LROonu3w71bdzugOpLyu1eMGiO0ObuVtZF2RNVTKmLiZpCVroMUl7a7GIAo8bvy/EMex3l+22o8dNCDEMjc+1BAs5lGeQLaUECD4vmrbHWO4aLfLyj2Haw0M0lMe5vW1zR0uJgEUJPtlmFtkEoCkVkLKim+zE2m4EaCbscM= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1776811964; c=relaxed/simple; bh=oCnOvcvyB5Q5+CMfPe8RbKAt5UgH4Q8QeBB9wZgxNgo=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=i8fzeT8zugEb7I7vJWDnteQFaK4fUCodbtlbCuLnb/3AzxeXJCjIV/eTWQX/oVputJpZpdiff2aIHrD35RTWl5qTAbHZJaT0dys4n/k/D+83p0M0lXISqnP6XHDlRMcXs/rOQFeEpp0BOGFENfEv34tjEtbbrUl5VV0Xv0l1P3A= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=nfcToyWv; arc=none smtp.client-ip=74.125.82.176 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="nfcToyWv" Received: by mail-dy1-f176.google.com with SMTP id 5a478bee46e88-2d9916deb14so8831594eec.0 for ; Tue, 21 Apr 2026 15:52:38 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1776811958; x=1777416758; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=LbcbMd28r+rmUyZ8KhlCo0GdQR1hCRYbQzQN370ZlHo=; b=nfcToyWvPz38AoQm946PLdUy78gvB3p4U0hKNzPzEDTOTTldD17OCwwxVmZjisvQ+D tbq8pKa0bEw2Zbe8SkNV604GNbuwjcFBgp8eaJiRlpq2st/RpBgODARKUbkVe2cBCjvY PvaTGBvHclvWl0L7MzQW/XJPfQwgk5ylAwoFcNzDYOu54nIX9ZQwqOx5/Q9Um6ly0I+N qClnpfBXBk/5Mfo0pxOVH3AJKM38gN2YOV28wFapyyNQZYh9grTfg/P7Frk2qiz9hW+w cZOIaI+DTEdmpVB0nVJwgdP6KHyNGidiVpbOrwzgjWq+7mbWndDF9W58pYsT4MV3TfYT cuCQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1776811958; x=1777416758; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to; bh=LbcbMd28r+rmUyZ8KhlCo0GdQR1hCRYbQzQN370ZlHo=; b=C2EEyYOeZMm+nQ1IN0sdA+LEVnfpv599ahZvNEWQK0HFtSX/NINRLt122KpfNqwsdL mrdkpk0nSYTDM19RlcQvpBgeC6ZTvQb0WX2sMluOoEin7lzScBSp9+sNQyCY5Mq3OkjC 2fmODf/XcWgV9a7wpiJyYxRUOfXG6qjqEuLXBwqalEJKwbAoz4nqoEWlB3G4+lq3JrHv HDPsEYAmB75F3mLS86so26R+wZudiv4NYfKsEaTCSjwubmvtkPNlLIRueB5vNXIpuEn0 o78btx1Tf/qcrCSBXf8AJVRcV3RymPTKNtqtsa+hOkdWiBQS39JusmZ1QjVXuYsYB1ga PY/Q== X-Forwarded-Encrypted: i=1; AFNElJ93XTGRQGJ97uENRTJS/vA73adr3kDv6EcZsTxbELCUBdOmNP7HJpZMwT1RC9yG0c1rOk1qu9ylcbnuvXVZVZCRmFy2@vger.kernel.org X-Gm-Message-State: AOJu0Yy2891Hwwo/+I0a8zSz1HgmfSjcedKZ2jEmN18Ddyc8/YVa7O7z ue0qvcm+egqRccSOtvHLzf02pnKYwQOc2+03tF2Gf8xf/G5E+LjdMQZi X-Gm-Gg: AeBDievXfI3PO4q1GQjWhrjh2tYtHvt7tnnyTSMgg9Z6UrnIG3F0UQisqvCfQqdguQ2 hCqx4mZDHBGDDidbFMX5ued9b0c5bIozoy62uzeSvSsRt8ocRe3rOtdp6vYNjJT9QhOr+8//WMg a8OEy0WO1Ws2XrtLaso8rawwfL1QbUMlbqjSMZ31gxh7WUPjSY4YQt1SY2mUSgFw963k6kYAkaD GttC6wKOYperQOQM/lfAeHlzQRXkCOmNtu3Q+p5mmbB33LaA1Dt/FeNl0qikfhyH6lUJdlNZj/q UduncRUMRQXi51kpxbcU7277MmtaAYeJN248LPCIB3C20rv6fNGTra91IM6l9OBiCf1Z2QH58Jf q7GOhpknKOLe9v8Hfs4vOS1PIwruqQpxP+0iwgNC2ktCb0bOmd1MDfKAIuhGtYeclexswdj3aWK brJ7SKtpwVyvPKcCYf/ttrLkxkmBlvRbnP X-Received: by 2002:a05:7300:f193:b0:2df:5715:82be with SMTP id 5a478bee46e88-2e466044880mr10177993eec.2.1776811957939; Tue, 21 Apr 2026 15:52:37 -0700 (PDT) Received: from TC-LAPTOP.lan ([209.76.64.37]) by smtp.gmail.com with ESMTPSA id 5a478bee46e88-2e53a4a8018sm26145884eec.8.2026.04.21.15.52.36 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Apr 2026 15:52:37 -0700 (PDT) From: Thierry Chatard To: linux-kernel@vger.kernel.org Cc: hansg@kernel.org, lee@kernel.org, platform-driver-x86@vger.kernel.org, ilpo.jarvinen@linux.intel.com, djrscally@gmail.com, linux-media@vger.kernel.org, mchehab@kernel.org, sakari.ailus@linux.intel.com, jacopo.mondi@ideasonboard.com, nicholas@rothemail.net, Thierry Chatard Subject: [PATCH v4 3/5] platform/x86: int3472: tps68470: add board data for Dell Latitude 5285 Date: Tue, 21 Apr 2026 15:52:15 -0700 Message-ID: <20260421225217.12472-4-tchatard@gmail.com> X-Mailer: git-send-email 2.51.0 In-Reply-To: <20260421225217.12472-1-tchatard@gmail.com> References: <20260421225217.12472-1-tchatard@gmail.com> Precedence: bulk X-Mailing-List: platform-driver-x86@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit The Dell Latitude 5285 2-in-1 has two cameras connected through a TPS68470 PMIC/clock/GPIO hub: Front: OV5670 (ACPI INT3479) on I2C4 Back: OV8858 (ACPI INT3477) on I2C2, daisy-chained behind TPS68470 S_I2C port (controlled by reg 0x43 S_I2C_CTL) GPIO mapping (TPS68470): INT3479 (OV5670): GPIO3 = reset, GPIO4 = powerdown (both active-low) INT3477 (OV8858): GPIO9 = s_resetn, GPIO7 = s_enable (both active-low) GPIO9 and GPIO7 are the TPS68470 secondary-port GPIOs (SGPO reg 0x22 bits 2 and 0), not regular GPDO outputs. Regulator mapping: CORE -> dvdd / INT3477 ANA -> avdd / INT3477 VIO -> generic (hardware always-on, no enable register, no consumers) VSIO -> dovdd / INT3477: enabling VSIO sets S_I2C_CTL (reg 0x43), opening the I2C passthrough to OV8858; the ov8858 driver enables dovdd at probe time, which naturally activates the passthrough before any I2C transaction to the sensor. AUX1 -> dvdd / INT3479 AUX2 -> dovdd / INT3479 A static clock consumer list is provided for both sensors (INT3477 and INT3479) to work around the broken ACPI _DEP on INT3479 described in the previous patch. Signed-off-by: Thierry Chatard --- .../x86/intel/int3472/tps68470_board_data.c | 169 +++++++++++++++++- 1 file changed, 166 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c index 71357a036..b40ac4fc5 100644 --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c @@ -74,8 +74,12 @@ static const struct regulator_init_data surface_go_tps68470_vcm_reg_init_data = .consumer_supplies = int347a_vcm_consumer_supplies, }; -/* Ensure the always-on VIO regulator has the same voltage as VSIO */ -static const struct regulator_init_data surface_go_tps68470_vio_reg_init_data = { +/* + * VIO has no enable register (always on at hardware level) and must never + * have direct consumers -- all outputs go through VSIO. Its voltage must + * exactly match VSIO on any board using the I2C pass-through. + */ +static const struct regulator_init_data generic_tps68470_vio_reg_init_data = { .constraints = { .min_uV = 1800600, .max_uV = 1800600, @@ -122,7 +126,7 @@ static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = [TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data, [TPS68470_ANA] = &surface_go_tps68470_ana_reg_init_data, [TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data, - [TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data, + [TPS68470_VIO] = &generic_tps68470_vio_reg_init_data, [TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data, [TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data, [TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data, @@ -287,6 +291,158 @@ static const struct int3472_tps68470_board_data dell_7212_tps68470_board_data = }, }; +/* Settings for Dell Latitude 5285 2-in-1 */ + +/* + * The BIOS leaves GNVS field C0TP at zero, which causes INT3479's _DEP to + * resolve to PCI0 instead of the INT3472 device. Provide a static clock + * consumer list so probe registers MCLK lookups for both sensors regardless + * of the broken _DEP traversal. + */ +static const struct tps68470_clk_consumer dell_5285_clk_consumers[] = { + { .consumer_dev_name = "i2c-INT3477:00" }, /* OV8858 rear camera */ + { .consumer_dev_name = "i2c-INT3479:00" }, /* OV5670 front camera */ +}; + +static struct regulator_consumer_supply dell_5285_int3477_ana_consumer_supplies[] = { + REGULATOR_SUPPLY("avdd", "i2c-INT3477:00"), +}; + +static struct regulator_consumer_supply dell_5285_int3477_core_consumer_supplies[] = { + REGULATOR_SUPPLY("dvdd", "i2c-INT3477:00"), +}; + +/* + * VSIO controls the S_I2C_CTL passthrough. Its voltage must match VIO + * exactly (both 1800600 uV). Mapping VSIO to dovdd/INT3477 means the + * passthrough is enabled when the ov8858 driver enables its dovdd supply. + */ +static struct regulator_consumer_supply dell_5285_int3477_vsio_consumer_supplies[] = { + REGULATOR_SUPPLY("dovdd", "i2c-INT3477:00"), +}; + +static struct regulator_consumer_supply dell_5285_int3479_aux1_consumer_supplies[] = { + REGULATOR_SUPPLY("dvdd", "i2c-INT3479:00"), +}; + +static struct regulator_consumer_supply dell_5285_int3479_aux2_consumer_supplies[] = { + REGULATOR_SUPPLY("dovdd", "i2c-INT3479:00"), +}; + +static const struct regulator_init_data dell_5285_tps68470_core_reg_init_data = { + .constraints = { + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_core_consumer_supplies), + .consumer_supplies = dell_5285_int3477_core_consumer_supplies, +}; + +static const struct regulator_init_data dell_5285_tps68470_ana_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_ana_consumer_supplies), + .consumer_supplies = dell_5285_int3477_ana_consumer_supplies, +}; + +static const struct regulator_init_data dell_5285_tps68470_vcm_reg_init_data = { + .constraints = { + .min_uV = 2815200, + .max_uV = 2815200, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 0, + .consumer_supplies = NULL, +}; + +static const struct regulator_init_data dell_5285_tps68470_vsio_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3477_vsio_consumer_supplies), + .consumer_supplies = dell_5285_int3477_vsio_consumer_supplies, +}; + +static const struct regulator_init_data dell_5285_tps68470_aux1_reg_init_data = { + .constraints = { + .min_uV = 1213200, + .max_uV = 1213200, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3479_aux1_consumer_supplies), + .consumer_supplies = dell_5285_int3479_aux1_consumer_supplies, +}; + +static const struct regulator_init_data dell_5285_tps68470_aux2_reg_init_data = { + .constraints = { + .min_uV = 1800600, + .max_uV = 1800600, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(dell_5285_int3479_aux2_consumer_supplies), + .consumer_supplies = dell_5285_int3479_aux2_consumer_supplies, +}; + +static const struct tps68470_regulator_platform_data dell_5285_tps68470_pdata = { + .reg_init_data = { + [TPS68470_CORE] = &dell_5285_tps68470_core_reg_init_data, + [TPS68470_ANA] = &dell_5285_tps68470_ana_reg_init_data, + [TPS68470_VCM] = &dell_5285_tps68470_vcm_reg_init_data, + [TPS68470_VIO] = &generic_tps68470_vio_reg_init_data, + [TPS68470_VSIO] = &dell_5285_tps68470_vsio_reg_init_data, + [TPS68470_AUX1] = &dell_5285_tps68470_aux1_reg_init_data, + [TPS68470_AUX2] = &dell_5285_tps68470_aux2_reg_init_data, + }, +}; + +static struct gpiod_lookup_table dell_5285_int3477_gpios = { + .dev_id = "i2c-INT3477:00", + .table = { + /* + * TPS68470 GPIO9 = s_resetn (secondary camera reset, active-low) + * TPS68470 GPIO7 = s_enable (secondary camera enable/powerdown) + * These logic outputs are specifically designed for secondary + * camera control on the TPS68470. Matches Surface Go pattern. + */ + GPIO_LOOKUP("tps68470-gpio", 9, "reset", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("tps68470-gpio", 7, "powerdown", GPIO_ACTIVE_LOW), + { } + } +}; + +static struct gpiod_lookup_table dell_5285_int3479_gpios = { + .dev_id = "i2c-INT3479:00", + .table = { + GPIO_LOOKUP("tps68470-gpio", 3, "reset", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("tps68470-gpio", 4, "powerdown", GPIO_ACTIVE_LOW), + { } + } +}; + +static const struct int3472_tps68470_board_data dell_5285_tps68470_board_data = { + .dev_name = "i2c-INT3472:05", + .tps68470_regulator_pdata = &dell_5285_tps68470_pdata, + .n_clk_consumers = ARRAY_SIZE(dell_5285_clk_consumers), + .clk_consumers = dell_5285_clk_consumers, + .n_gpiod_lookups = 2, + .tps68470_gpio_lookup_tables = { + &dell_5285_int3477_gpios, + &dell_5285_int3479_gpios, + }, +}; + static const struct dmi_system_id int3472_tps68470_board_data_table[] = { { .matches = { @@ -316,6 +472,13 @@ static const struct dmi_system_id int3472_tps68470_board_data_table[] = { }, .driver_data = (void *)&dell_7212_tps68470_board_data, }, + { + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Latitude 5285"), + }, + .driver_data = (void *)&dell_5285_tps68470_board_data, + }, { } }; -- 2.51.0